Top Magnetic Pulley Reviews

GM CLIMBING 20kN Micro Prusik Minding Pulley 1/2\ CE UIAA Certified (Pack of 2(Black))

  • GM CLIMBING Micro Prusik Minding Pulley (PMP), rated at 20kN/4500lbs MBS, both CE and UIAA certified, compatible with ropes up to 1/2 in / 13mm. Function pulley installed on ropes and clipped to tend hitch slacks in Ddrt climbing or work-positioning. A day-to-day use pulley in riggings, integrated with prusik hitches to build progress capture on haul system, making efficient redirects in bear rigging, home pulling exercise devices, and more to explore..
  • Quality-made climbing pulley, with 20kN breaking strength [5kN higher than required 15kN by CE and UIAA], to build up efficient pulley mechanical advantage systems: haul your partner out of the crevasse - personal rescue, rig gears or heavy loads when mountaineering, pull out a stranded car/ boat, haul food and stuffs out of reach when camping - bear rigging..
  • Palm-size pulley in lightweight of 3.7 oz. The micro pulley is easy to use with only one hand. Mobile side plates rotate freely around the axle and it's convenient to install the pulley anywhere on the rope. The pulley accommodates carabiners of most shapes since side plates are curved to stay fully close against each other on the top..
  • Prusik Minding! The pulley is designed to be with flat bottom to side plates, which makes a PMP (prusik mind....
Check Stock

Pulley Wheel Stainless Steel Small Pulley Block 360 Degree Rotating Silent Cable Pully Load Bearing Mechanical Pulleys, Silver (Silver-2)

  • Material:Pulley wheel is made of high-quality stainless steel, which is strong, rust-proof, wear-resistant and corrosion-resistant.
  • Whirling:Top of pulley system 360 degrees whirl to prevent the rope from twisting, maintain a stable cable pulley block,load bearing.
  • Quiet:Rope puller smooth sliding, small high-quality nylon slot double bearing design pulley pro does not produce noise.
  • Install:Pulley hoist can be installed on wood, wall and metal, rope pulley suitable for home fitness or outdoor work.
  • Gym pulley system:Pulley attachments specially designed for home gym pulley system DIY, construction, cable hoisting etc.
Check Stock

TooTaci Pulley System Set,Pulley Block with Rope and Hooks,Pulley and Rope Kit for Lifting,304 Stainless Steel M20 Single Pulley Wheels,with 20M/4mm Nylon Rope,Hooks,Eye Pad Plate,Cleat Hooks

  • Pulley Block Kit comes with 2Pcs M20 Crane pulley block,2Pcs Carabiner Snap Hook Clips, 2Pcs Oblong Eye Pad Plate, 2Pcs Cleat Hooks, 20 meter Nylon Pulley Line Rope And screw Accessories Ideal Kit to Make an Easy Pulley System for Pulling & Lifting ..
  • This Pulley System Set have all the Items you needed for pulley system rather than have to buy each part separately.
  • This Kit include Pulley Block ,Carabiner Hook, Eye Pad Plate,Cleat Hooks all made of 304 stainless steel, anti-rust and wear resistance with strong structure, easy to fit and use in any weather !.
  • Pulley Block with Ergonomic design, fixed top for easily rope handling.
  • 4mm Pulley Line rope 65ft extreme strong with high tenacity and enough length.
  • Eye Pad Plate & Carabiner Hook provide versatile binding with rigging or anchoring for quick connect of ropes, chains, straps..
  • NOTE: The Maximum Load Capacity of a Single Pulley Block is 50KG/110LB !.
  • Pulley with Rope and Hook Many Uses for Make an Easy Pulley System for fastening rope to flagpole, small boats, awnings, blinds,tarps ,etc....
  • As a topping lift for a portable garage door.
  • Works well for bird feeder pulley system, pull and climbing ropes to raise and lower.
  • Used to fit and tension a sail shade,... Perfect doe....
Check Stock

Phoenix V-Belt Pulley - 5/8in. Bore, 4 1/2in. Outside Dia.

  • Price For: Each Set Screw Included: Yes Construction: Spoked Number of Grooves: 1 Item: V-Belt Pulley Pulley Bore Type: Fixed Bore Pulley Type: Standard V-Belt Pulley For V-Belt Section: 3L, 4L, A Bushing Required: None Pulley Material: Die Cast Zamak 3 Pulley Bore Dia.: 3/4" Pulley Outside Dia.: 7.00" 4LA or A Belt Pitch Dia.: 6.85" Keyway Size: 0.187" x 0.093".
  • 4L, A, or AX Belt Pitch Dia.: 6.85" 3L Belt Pitch Dia.: 6.55" Fits Shaft Dia.: 3/4" Country of Origin (subject to change): United States.
Check Stock

GM CLIMBING 29kN CE UIAA Certified Micro Pulley Slack Tender for Hitch Tending

  • GM CLIMBING Fixed Micro Pulley, rated at 29kN, CE and UIAA certified, works with ropes up to 0.47in/12mm. A functional pulley to advance hitches in Ddrt climbing systems, to tend hitch slacks on work-positioning lanyards.
  • Makes an efficient redirect in light rigging, hauling, mechanical advantage systems..
  • EASY USE! It's quick to install the rope on the micro pulley due to the fixed side plates. The oval-shaped carabiner is recommended to be used with. Pocket size allows easy operation on your palm to set up various climbing or rigging configurations..
  • 29kN strength rating! Fixed micro pulley offers full strength in lightweight of 3.05 Oz, capable of being an efficient part of your tree climbing, adjusters of work-positioning lanyards, and self-rescue pulley systems. CE and UIAA certified ensures a safe pulley for activities at height and in-depth..
  • Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Aluminum plates with chamfer rounded edging reduce wear on the textile gears, well protecting ropes sliding through..
  • A quality-made micro pulley, most seen its functions in tending hitches in climbing techniques, reducing wear when installed on the climbing harness rope bridge. Also a....
Check Stock

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

  • Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
  • Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
  • Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
  • Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock

Yuecoom Sliding Window Pulley, Window Pulley Stainless Steel Sliding Window Groove Wheel Furniture Hardware Fittings

  • Stable Window Pulley: It adopts stainless steel frame, brass double groove pulley, durable, smooth and quiet..
  • Window Pulley Application: The pulley has little friction, stable and silent, and is suitable for aluminum alloy window..
  • Durable Window Pulley: It is fixed with stainless steel rivets, wear‑resistant, and can be used for a long time..
  • Practical Window Pulley: The installation is firm, not easy to loosen, and the bearing capacity is strong, about 45‑80kg..
  • Convenient Window Pulley: Easy to install and use, flexible push and pull, it is a practical hardware accessory..
Check Stock

GM CLIMBING Pack of 2 29kN CE UIAA Certified Micro Pulley Slack Tender for Hitch Tending

  • GM CLIMBING Fixed Micro Pulley, rated at 29kN, CE and UIAA certified, works with ropes up to 0.47in/12mm. A functional pulley to advance hitches in Ddrt climbing systems, to tend hitch slacks on work-positioning lanyards.
  • Makes an efficient redirect in light rigging, hauling, mechanical advantage systems..
  • EASY USE! It's quick to install the rope on the micro pulley due to the fixed side plates. The oval-shaped carabiner is recommended to be used with. Pocket size allows easy operation on your palm to set up various climbing or rigging configurations..
  • 29kN strength rating! Fixed micro pulley offers full strength in lightweight of 3.05 Oz, capable of being an efficient part of your tree climbing, adjusters of work-positioning lanyards, and self-rescue pulley systems. CE and UIAA certified ensures a safe pulley for activities at height and in-depth..
  • Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Aluminum plates with chamfer rounded edging reduce wear on the textile gears, well protecting ropes sliding through..
  • A quality-made micro pulley, most seen its functions in tending hitches in climbing techniques, reducing wear when installed on the climbing harness rope bridge. Also a....
Check Stock

Paliston 30kN Climbing Pulley with Ball Bearing for Rock Climbing Arborist

  • Sturdy and Robust Pulley. Made from aircraft aluminum alloy, this climbing pulley is sturdy enough to trust on..
  • Ball Bearing Pulley. Mounted with premium ball bearing, the climbing pulley rotates smoothly..
  • Reliable Pulley. The pulley is rated up to 30kN, also get CE Certification..
  • The swing side makes it easy to remove or install your rope..
  • Suitable for rock climbing, hauling system, arborist and many other applications..
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Groove Wheel Pulley Stainless Steel Pulley Block Super Silent Single Pulley Block for DIY Gym Equipment,Sliding Gate Detachable Duplex Bearing with Mounting Screws and Expansion Pipes U Type (1 Pack)

  • ✅【Powerful Stainless Steel Pulley Block】Each U Type Single Wheel Pulley Block has 4 mounting holes and the diameter of each hole is 7mm, which fits for 3-12 mm width flat belt. It can be mounted on various walls, wood and metal. (Equipped with 4 pcs 6*40mm self-tapping screws and 4 pcs 10*60mm yellow expansion pipes.).
  • ✅【Superior Groove Wheel】The Single Wheel Lifting Rope Pulley Block is made of high quality stainless steel, which is durable and easy to clean. The thickened steel plate enhances the bearing capacity of the Rope Pulley, which can carry up to 800 pounds..
  • ✅【Super Mute Duplex Bearing Design】The Silent Duplex Bearing can greatly reduce the friction of the cable pulley and make the cable pulley rotate smoothly and stably. You can hardly hear the sound when it works..
  • ✅【Wide Application】The Wall Mount Pulley Block is widely used for home fitness, wire rope traction, DIY attachment for home gym pulley system, inverted track, lifting blocks, ladder lift, gym equipment, rolling gate sliding gate and other outdoor works..
  • ✅【Easy Installation】The pulley is designed for easy installation. You just need to mark the hole location, drill 4 holes with a 10 mm drill bit in the wall and insert the yellow expansion pipe....
Check Stock