Top Magnetic Coupling For Hygienic Applications Reviews

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
remove using a disconnect clip or disconnect tongs.
COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
gray collar end works with polybutylene pipe.
tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.

Check Stock

Magnetic Jet Motor BF-004 for Luraco Magnetic Jet Pedicure Spa Tubs Wet End Use with Pedicure Liners (Includes Propeller and Cap)

BF-004 Pedicure spa chair part magnetic head uses magnetic coupling technology.Whirlpool Spa Chair.MOTOR DIMENSION: 3 3/8"" Diameter Back Head X 3 1/8"" ..
Pipeless Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor..
Magnetic Head Includes set 1- base , 1- magnetic impeller and 1- cover..
There is no shaft seal, will never leak, is worry free..
If for whatever reason, you decide you are not satisfied, you can request a replacement or a full refund, no questions!.

Check Stock

Showingo New Pipeless Magnetic Jet Head Motor for LURACO Pedicure spa Chair Part Magnetic Head BF-004 Pedicure spa Tubs Includes Propeller and Cap

Pedicure spa chair part magnetic head uses magnetic coupling technology..
Magnetic Head Includes set 1- base , 1- magnetic impeller and 1- cover..
Pipeless Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor..
There is no shaft seal, will never leak, is worry free.
The Magnet-jet be easily sanitized, clean, and service..

Check Stock

Pipeless Jet Magnetic/Spa Pedicure Chair Motor for Luraco Magnet Jet

【Pipeless Magnetic Jet For LURACO 】Fit Luraco pipeless motor magnetic jet nail pedicure spa chair, Mostly, this Jet is able to be installed in all models..
【Luraco Magnet Jet】Compatible with Shiatsulogic Pedicure Chair w/Discharge Pump Pedicure Tub | Pedicure Spa Chair Nail Salon Full Function Massage Chair,Pedicure chair parts with Pipe-less Whirlpool System Pedicure Spa..
【FEATURES】Luraco pipeless magnetic jet pedicure spa massage chair, Patented magnetic coupling design,Dual powerful jet streams 35 degrees with respect to pump axis,Easy to install,Super Easy to clean..
【Premium Quality】Pipe-less Jet Long life motor Green Technology only 50W energy consumption,Low power consumption,Long life motor.Very quiet when running..
【Luraco Magnetic Jet 】 Specifications:110VAC,Built with magnetic impeller to be used easily with liner,Need 3"1/2 hole to mount the jet in the tub..

Check Stock

Moondrop CHU High Performance Dynamic Driver IEMs in-Ear Earphone (Without mic)

Nano-Crystal Coating Composite Diaphragm.
10mm Composite Cavity Dynamic Structure：Adopting the Aria's decentralized dynamic structure, the high-performance 10mm composite cavity with high-frequency phased waveguide leverages a N52 Nd magnet internal magnetic circuit and 0.035m ultra-thin imported CCAW sound coil to obtain high energy conversion efficiency, and deliver outstanding performance with full dynamic range and rich details..
Accurate Calculatioof Acoustic Coupling Cavity：In order to match the frequency response as closely as possible to the VDSF Target Response, the acoustic coupling cavity needs to be carefully controlled. Through volume and dimension calculation, FEA finite element simulation and 3D printing experiment verification, an acoustic coupling cavity has been created which can accurately reproduce the ideal frequency response..
Alloy Casting External Cavity：The metal outer cavity is manufactured from alloy materials using melting and injection molding technology, thus creating a stable, precise, and esthetically pleasing cavity that is both durable and reliable..

Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....

Check Stock

(2) Pairs MB QUART FSB216 6.5' 280 Watt Car Audio Component Speakers

...ling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface. Tinsel Leads: Highly conductive while remaining flexible during high power applications. Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider.
External Component Crossover: External Passive Butterworth crossover for a smooth transition of frequencies from midrange/midbass to the tweeter element designed into a compact crossover housing that can be easily hidden in the installation. Frame: Heavy gauge progressive-die stamped steel frames for ultimate rigidity. Motor: Ferrite magnet motor creates a strong magnetic field while remaining small enough to fit nearly every application.
Connectors: Use spade connectors or solder direct for the best connection. Tweeters: Large component tweeters produce clear highs while handling plenty of power without sound harsh. Mounting Diameter/Cut Out: 5.59" inches. Outside Diameter: 7.01" inches. Mounting Depth/Chassis Depth: 2.12" inches.

Check Stock

Agatige 2Pcs Clamping Nuts Knob, Female Thread 7 Star Shaped Head Nuts Knurled Clamping Handle Nuts Fastener Black M16 x 80

Wide range of nut methods, strong wear resistance, high hardness level.
Wide range of applications: coupling steel nuts are widely used in household and office equipment, communication equipment and other machinery industries..
Perfect for carrying around: the coupling nut is very suitable for use in wood and humid environments. Hexagon bolts and nuts are very good quality products on the market and are durable..

Check Stock

American Standard 7381125-400.0070A Fluid Master 400A Universal Toilet Water Fill Valve, 10.00 Inch Wide x 3.00 Inch Tall x 3 Inch Deep, Black

American Standard universal fill valve that will hold up in high-use areas, making it perfect for most applications.
Universal Fluid master 400A replacement fill valve includes valve, shank washer, lock, coupling nuts, coupling washer, refill tube and refill tube clip.
Check your model toilet for compatibility.

Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
remove using a disconnect clip or disconnect tongs.
VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.

Check Stock

OSTARE Snap Shackle Stainless Steel Quick Release Rigging Sailing Fixed Bail Snap Shackle 2pcs (2\ Sliver)

Stainless steel bow shackle is made of high quality stainless steel for durable use, anti corrosion and rust resist, strong load-bearing..
Threaded pin for easy removal and securing, help protect the eye of a nylon lifting sling or polyester round slings from wear and tear.
Great for coupling, lifting or conventional towing..
Perfect connection accessories, used for coupling chain and wire rope.
Apply to a variety of marine, industrial, agricultural or household applications..
Package includes 4 pieces M6 bow anchor shackle, can be used for parachute cord woven bracelet accessories or outdoor climbing, rescue tools, etc..

Check Stock

LED Flowing Magnetic Charger Cable 6Pack,6ft,6ft,3ft,3ft,3ft,3ft 3in1 Light Up Moving Party Phone Charging Cable Compatible with Android Micro USB Type C Smartphone Device

⚡ Innovative Design: The 360-degree rotating magnetic design more precisely completes the magnetic coupling, which improves charging efficiency.....
⚡ Strong Magnetic and 3 in 1 Design: The magnetic charging cable has strong magnetism, enough to bear the weight of a smartphone, to avoid the....
⚡ One-Hand Operation & Dust Protection: One-handed operation of the LED magnetic charging cable, which makes charging more convenient and safer....
⚡ Reminder: For charging only,not for data transfer! For I users, please note that the charging head is single-sided charging, please put the side....
⚡ Package Includes:6-Pack magnetic charging cable with different length combinations, suitable for mobile phones, and other devices. The package....

Check Stock

Replacement Luraco Magnetic Jet Head BF-004 Fits Pedicure |spa Massage Chair| Tubs Spa Chairs Accessories.

【Magnet Jet Head】Fit Shiatsulogic Pedicure Chair w/Discharge Pump Pedicure Tub | Pedicure Spa Chair Nail Salon Full Function Massage Chair,Pedicure chair parts with Pipe-less Whirlpool System Pedicure Spa..
【 Easy Clean and Service】The magnetic head uses magnetic coupling technology, no shaft seal, will never leak, is worry free and Magnet-jet be easily clean..
【Pedicure Spa Chair Magnetic Head】This Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor.Powerful and durable with 'No Splash' Design,Auto turn OFF to protect system when water level is low or magnet jet head is not attached..
【Magnetic Head 】Size approx ：3 3/8"Diameter Back Head X 3 1/8"Diameter Front Head.Magnetic Head Set Include:1- base,1- magnetic impeller,1- cover..
NOTE: This Head will not fit to previous ECO jet system.When the magnetic induction pump is started, it will detect if there is enough water within 15 seconds. If there is not enough water detected within 15 seconds, it will automatically stop. If you want to start after stopping, you must cut off the power again, and then it can start..
【After-Sales Guarantee】If you find that the product does not work, please check whether the pump is faulty. If you encounter any problems, please contact m....

Check Stock