Top Magnetic Coupling For High Temperature Reviews

Electric Hot Plate Multifunctional Electric Laboratory Heating 500w 110V

SafetyHeat System Protects the Lab An industry-leading early detection system that uses two independent safety controls to continuously monitor the electronics and shut off heating before an overtemperature condition occurs.
Powerful, Consistent Stirring Performance Precise stirring from 60 to 1600 rpm is made possible by the design of a powerful motor, strong magnet and software controlled ramp rate, ensuring secure magnetic coupling for viscous applications.
Easy to Read LCD Display With Everything You Need to Know The bright LCD display includes large temperature and speed settings, intuitive icons and a prominent hot top indicator - all designed to quickly and easily monitor performance from across the lab.

Check Stock

JoyTube Brass Hose Barb Fitting Metals Splicer Mender 1/4 Barb Hose Union Fuel Gas Water Air Pack of 12

Connections: 1/4” to 1/4”. Our hose barb fitting is long enough,which make sure it can insert hose but not easy to be apart. Our barb union will provide good seal when you use it to connect hose..
Application of our barb splicer is very wide, such as Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.(Air/Water/Fuel/Boat/Gas) ..
Connects to a hose on both ends. Union coupling for connecting two hoses with the same diameter in a straight run..
Brass barb union for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
The barbed stems create better tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not include)..

Check Stock

Abbott Rubber PVC Discharge Hose Assembly, Blue, 2 in. Male X Female Cam and Groove, 65 psi Max Pressure, 50 ft. Length, 2 in. ID

PVC for corrosion resistance, high strength, and light weight.
High-tensile polyester yarn reinforcement for strength and durability.
2" aluminum male cam and groove coupling and 2" female cam coupling for resistance to corrosion and tarnishing.
Lightweight hose coils flat for compact storage.
Temperature range from -10 to +150 degrees F and maximum pressure rating of 65 psi.

Check Stock

Magnetic Jet Motor BF-004 for Luraco Magnetic Jet Pedicure Spa Tubs Wet End Use with Pedicure Liners (Includes Propeller and Cap)

BF-004 Pedicure spa chair part magnetic head uses magnetic coupling technology.Whirlpool Spa Chair.MOTOR DIMENSION: 3 3/8"" Diameter Back Head X 3 1/8"" ..
Pipeless Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor..
Magnetic Head Includes set 1- base , 1- magnetic impeller and 1- cover..
There is no shaft seal, will never leak, is worry free..
If for whatever reason, you decide you are not satisfied, you can request a replacement or a full refund, no questions!.

Check Stock

Showingo New Pipeless Magnetic Jet Head Motor for LURACO Pedicure spa Chair Part Magnetic Head BF-004 Pedicure spa Tubs Includes Propeller and Cap

Pedicure spa chair part magnetic head uses magnetic coupling technology..
Magnetic Head Includes set 1- base , 1- magnetic impeller and 1- cover..
Pipeless Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor..
There is no shaft seal, will never leak, is worry free.
The Magnet-jet be easily sanitized, clean, and service..

Check Stock

Pipeless Jet Magnetic/Spa Pedicure Chair Motor for Luraco Magnet Jet

【Pipeless Magnetic Jet For LURACO 】Fit Luraco pipeless motor magnetic jet nail pedicure spa chair, Mostly, this Jet is able to be installed in all models..
【Luraco Magnet Jet】Compatible with Shiatsulogic Pedicure Chair w/Discharge Pump Pedicure Tub | Pedicure Spa Chair Nail Salon Full Function Massage Chair,Pedicure chair parts with Pipe-less Whirlpool System Pedicure Spa..
【FEATURES】Luraco pipeless magnetic jet pedicure spa massage chair, Patented magnetic coupling design,Dual powerful jet streams 35 degrees with respect to pump axis,Easy to install,Super Easy to clean..
【Premium Quality】Pipe-less Jet Long life motor Green Technology only 50W energy consumption,Low power consumption,Long life motor.Very quiet when running..
【Luraco Magnetic Jet 】 Specifications:110VAC,Built with magnetic impeller to be used easily with liner,Need 3"1/2 hole to mount the jet in the tub..

Check Stock

Anderson Metals 57014-06 Brass Hose Fitting Union 3/8 x 3/8 Barb

Union coupling for connecting two hoses with the same diameter in a straight run.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Metalwork Compression Union Brass Tube Fitting, 2pcs (1/4\ OD x 5/16\ OD)

Union for connecting and disconnecting two tubes more easily than with a coupling.
Compression tube connections on both ends.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Three piece construction - nut, sleeve and body.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

CENTAURUS 4Pcs Universal Motor Joint Shaft Coupling 4mm to 4mm with Screws

【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade Universal Motor Joint Shaft Coupling 4mm to 4mm is 100% brand new,wearproof, durable and widely used for motor etc..
【HIGH QUALITY】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is made of high quality wearproof steel material which can use for a long time..
【WIDE APPLICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is widely used for shaft connection,produced based on International Flange Standard..
【MAIN SPECIFICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm ,Inner Diameter: 4mm to 4mm. Outer Diameter is 9mm. Height is 23mm. Color: Silver.
【PACKAGE & SERVICE】Package Include: 4Pcsx 4mm to 4mm Universal Joint Shaft Coupling.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..

Check Stock

Dixon BCM76 Brass Hose Fitting, Machined Coupling, 3/4\ GHT Male x 3/4\ Hose ID Barbed

Coupling for connecting two hoses or pipes with the same diameter in a straight run.
Connects to a hose on one end and a GHT female connector on the other.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
For use with rubber (styrene butadiene), neoprene, Viton, leather, or rubber gaskets (not included).
Hex nut for tightening threaded fitting with a wrench.

Check Stock

LED Flowing Magnetic Charger Cable 6Pack,6ft,6ft,3ft,3ft,3ft,3ft 3in1 Light Up Moving Party Phone Charging Cable Compatible with Android Micro USB Type C Smartphone Device

⚡ Innovative Design: The 360-degree rotating magnetic design more precisely completes the magnetic coupling, which improves charging efficiency.....
⚡ Strong Magnetic and 3 in 1 Design: The magnetic charging cable has strong magnetism, enough to bear the weight of a smartphone, to avoid the....
⚡ One-Hand Operation & Dust Protection: One-handed operation of the LED magnetic charging cable, which makes charging more convenient and safer....
⚡ Reminder: For charging only,not for data transfer! For I users, please note that the charging head is single-sided charging, please put the side....
⚡ Package Includes:6-Pack magnetic charging cable with different length combinations, suitable for mobile phones, and other devices. The package....

Check Stock

Legines 2pcs Barb Union 1/2 Barbed x 1/2 Barbed Splicer Brass Hose Fitting Mender Joiner

Union coupling for connecting two hoses with the same diameter in a straight run.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Legines 2pcs Barb Union 3/8\ Barbed x 3/8\ Barbed Splicer Brass Hose Fitting Mender Joiner

Union coupling for connecting two hoses with the same diameter in a straight run.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock