Top Magnetic Coil Casing Reviews

Power Acoustik 12" Woofer Dual 4 Ohm 2500W Max

Overcompensating Motor Structure for Increased Magnetic Strength, 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics, Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up, Die-Cast Aluminum Heat Sink Dust Cap Absorbs Voice Coil Heat, Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone.
Non-Magnetic Non-Resonate Die-Cast Aluminum Frame, 2.5” 4-Layer Voice Coil w/ Large Gauge Wire Increases Power, High-Temperature Tolerance Adhesives Resist Thermal Failure, Nickel Plated 8ga Spring-Loaded Compression Wire Terminals, Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection.
High-Density Polyether Foam Surround w/ UV & Chemical Protection, Dual Poly-Cotton Suspension Dampen Violent Accelerations, Stitched Voice Coil Leads Prevent Potential Damage, 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included.
Efficiency (1w/1m): 86.50, Voice Coil Configuration: 2.50″ Dual 4Ω, Motor Volume: 254oz Re: 7.230Ω Fs: 28.60Hz Qes: 0.416 Qms: 4.722 Qts: 0.383 Diameter: 12”.
Vas: 1.69ft3 Bl: 24.55tm Mms: 200.815g Cms: 152.013 Sen: 86.56db MAX Power: 2,500w RM....

Check Stock

ICZW Induction Heater 1500W Magnetic Automotive Flameless Heating Handheld Bolt Removal Rusty Screw Removing Tool 110V

【Induction heater coil kits】This 1.5KW induction heater comes with Φ20mm*1, Φ26mm*1, flat coil*1, DIY coil*1, is suitable for heating various rusty bearings and nuts. Compared with 1000W induction heater, the coil is thicker and more durable.
【Safety】Flameless heating,This induction bolt heater has excellent performance, adopting high frequency magnetic field to heat metal only by induction heating.
【High Efficiency】Separate design that makes this magnetic induction heater can heat continuously for 6 minutes. Heat the object to 800℃ in 5-40 seconds by 1.5KW high power.
【Easy to use】One-touch switch with a handle that conforms to manual mechanics for easy operation and movement.
【Application】 Adopting electromagnetic induction theory, it can fast heat small metal parts of automobiles or machines. Mainly used for heating rusty/frozen/corrosive bolts, nuts, fasteners, suspension nuts, gears, pulleys, bearings, etc., but also helps remove car stickers.

Check Stock

MB Quart - Two Pairs of Formula 5x7 / 6x8 Inch 2-Way Coaxial Car Speakers - FKB168

Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic....
Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat..
Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process..
Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response..
Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider..

Check Stock

Jura Milk Pipe with Stainless Steel casing (Non GIGA)

.../E60/E600, D6/D60/D600, A9/A900, A7/A700, ENA 8, ENA MICRO 90, WE8.
Encased in a high-quality stainless steel coil spring, the milk pipe connects the milk container to the milk spout and makes the perfect finishing touch to the elegant design of your coffee machine. The opaque casing of high-quality material guarantees optimum protection against UV rays and the effects of light. Precision-fit connectors ensure airtight connections. Ready for use right away, this milk pipe offers the ideal solution for optimum milk hygiene every time..
To keep things that way, regular maintenance is essential. For complete hygiene, every JURA coffee machine features integrated rinsing and cleaning programmes. We recommend performing milk system cleaning once a day. With normal use, the milk pipe will then only have to be replaced after 3 months. The accessory set for milk systems is available online and from specialised dealers..
The milk pipe with stainless steel casing can be trimmed to the desired length, but we recommend the pre-assembled length of 23 centimetres. You can easily connect the milk pipe with its stainless steel casing to your coffee machine as shown in the enclosed instruction leaflet..

Check Stock

HEPENG A411001620 Ignition Coils for Echo Backpack Blower EB600RT,PB-580H,PB-580T Engine Module,Replaces OPPAMA Coil,A10058

Ignition module for EB600RT,PB-580H,PB-580T Blowers.
Perfectly match the flywheel work and emit strong sparks.
Easy to install on the engine,no need to assemble wire cap terminals with tube.
Please Confirm the number stamped on the casing of your ignition coil module for confirmation.

Check Stock

Soundstream 2000W Peak (1000W RMS) 12' Tarantula Dual 4-Ohm Car Subwoofer

Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Accelerations.
1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
Mounting Depth: 7.25" | Optimum Sealed Box Volume: 1.50ft3 | Optimum Ported Box Volume: 2.50ft3.

Check Stock

MB Quart - Pair of Formula FSB216 6.5 Component Speakers and A Pair of Formula 6x9 Speakers FKB169

Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic....
Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat..
Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process..
Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response..
Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider..

Check Stock

Soundstream X5.15 Team 15' Tarantula 7500W Dual 1 Ohm Subwoofer Bass Speaker

Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Violent Accelerations.
1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
Mounting Depth: 9.25" | Optimum Sealed Box Volume: 2.00ft3 | Optimum Ported Box Volume: 4.00ft3.

Check Stock

Power Acoustik BAMF-124 12 Inch 3500 Watt Max 1750 Watt RMS Car Audio Subwoofer Speaker with 3 Inch Dual Voice Coil and Vented T Yoke (2 Pack)

2 PACK OF POWERFUL SUBWOOFERS: 2 pack of 12-inch, 3500-watt subwoofer with an overcompensating motor structure for increased magnetic strength.
IMPRESSIVE PERFORMANCE: 12-millimeter T-yoke and top plate improve low-frequency dynamics.
3-inch, 4-layer voice coil with direct connect wire increases power handling.
PROTECTION FEATURES: Vented T-yoke and frame reduces voice coil heat build-up.
High-temperature tolerance adhesives resist thermal failure.
Stitched voice coil leads prevent potential damage.
Non-transfer Spruce pulp cone with UV and chemical protection.
DURABLE DESIGN: Non-magnetic, non-resonate die-cast aluminum frame is lightweight yet durable.
Stitched and glued surround and cone joints for strongest bonding.
INCLUDES: 2 1-piece gasket/trim Ring with concealed mounting holes included.

Check Stock

(2) Pairs MB QUART FSB216 6.5' 280 Watt Car Audio Component Speakers

...55 Hz - 20 kHz. Sensitivity: 88 dB. Crossover Point: 2 kHz. Crossover Slope: 12 dB. Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability.
Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat. Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process. Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response.
Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface. Tinsel Leads: Highly conductive while remaining flexible during high power applications. Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider.
External Component Crossover: External Passive Butterworth crossover for a smooth transition of frequencies from midrange/midbass to the tweeter element designed....

Check Stock

Soundstream AF.694 Arachnid Full Range 6x9' 4-Way 500W Speakers,Black and Silver

Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Accelerations.
1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
Mounting Depth: 7.25" | Optimum Sealed Box Volume: 1.50ft3 | Optimum Ported Box Volume: 2.50ft3.

Check Stock

84 inches Hanging Magnet Magnetic Sweeper Tool Nail Magnet Sweeper Magnet Sweeper Magnetic Nail Sweeper Magnetic Sweepers fits Forklift

Sturdy Aluminum Casing: Our hanging magnetic sweeper is designed with a heavy-duty aluminum casing, and it has several tightly-fixed lifting handles that are all made of premium steel. These high-quality materials ensure it can be used for years to come..
99 LBS Lifting Capacity: This 84" magnetic sweeper covers a large area at a single time, saving effort and time. The internal magnets produce a strong magnetic force that can lift items weighing up to 99 lbs. Clear out that warehouse or factory in no time..
W/ Quick Releasing Lever: As there is one ergonomic load releasing lever, you won't bother removing the countless sharp nails or screws with your bare hands. Once you pull it, everything will be released, which is more convenient and safer..
Clear the Way Effortlessly: Just put your forklift forks through the two handles, and use the eye bolts to fix them. Then drive the vehicle across your warehouse aisles, or any other place where you want to make it a clear "road". It won't miss a single nail..
Wide Application: This suspension-type magnetic sweeper can be used in many places, such as construction sites, factories, warehouses, etc. It is perfect for picking up nails, screws, and other sharp metals to prevent injury to workers, bystanders, or ....

Check Stock

Audio-Technica AT33PTG/2 Dual Moving Coil Turntable Cartridge

Moving coil cartridge with Microlinear stylus delivers exquisite, full-range audio reproduction.
Advanced tapered boron cantilever and reduced coil weight improve the audio quality, particularly in the higher frequencies.
Neodymium magnet and permendur yoke dramatically enhance the magnetic energy.
PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer.
High-separation, wide-response dual moving coil. Recommended Load Impedance: More than 100 ohms (when head amplifier is connected).

Check Stock