Top Magnet Wire Switch Reviews

Yiming Magnetic Thermostat Switch with High Temperature Resistant Wire for Fireplace Blower Fan, Wood Stove, Gas Log Fireplace, Circuit On At 120°F and Off At 90°F.

  • ★ Universal Fit - The magnetic thermostat on/off switch with high temperature resistant wire, used in universal wood stoves, fireplace blower kits, gas log firplaces. Such as Heat N Glo, Heatilator, Majestic, Desa Tech, Regency fireplace..
  • ★ Very Easy to Install - The fireplace thermostat has a magnet instead of having to mount it with screws, attach the magnetic heat sensor to the underside of the firebox..
  • ★ Turns On and Off Automatically - Automatically turns fireplace on and off at set temperature of thermostat switch, you don’t require manual star, adjustment, stops..
  • ★ The wood stove fan limit switch activate (turn on) at approximately 120°F and shut off at approximately 90°F (+/- 5°F tolerance)..
  • ★ What You Get: 1 Magnetic Thermostat Switch and 2 High Temperature Wire for fireplace blower fan kit. The wires is constructed with female connectors on both ends, built-in enameled copper and PVC jacket to ensure extra protection and durability..
Check Stock

10pcs RC-33 NC Recessed Wired Window Door Contact Sensor Alarm Magnetic Reed Switch White

  • RC-33 NC Recessed Wired Window Door Contact Sensor Alarm Magnetic Reed Switch.
  • Magnet near together, the switch is closed.And the switch and magnet is separate, the switch is open..
  • NC means Normally Closed: When the magnet together, the circuit is conductive( light on ).
  • when the magnet separate, the circuit is not conductive ( light off )..
  • NC means Normally Closed:When the magnet together, the circuit is conductive( light on ).
  • Each Size(Approx): 17 x 10.6mm / 0.67 x 0.42-inch (H*D) Cable Length(Each): 25cm / 9.8-inch.
Check Stock

Musiclily 11-Hole HSS Prewired Loaded Pickguard with Single Coil Pickups Set for Fender Squier Strat Electric Guitar, 4Ply Tortoise Shell

  • Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc, good replacement or upgrade option.
  • 11-Holes standard HSS strat style pickguard, large back shielding.
  • Standard single-coil pickups, ceramic magnet, wax potted, output: 5.7K ohm for neck and middle, 12.5K ohm for bridge.
  • Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws.
  • Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode.
Check Stock

Musiclily 11-Hole SSS Prewired Loaded Pickguard with Single Coil Pickups Set for Fender Squier Strat Electric Guitar, 4Ply Black Pearl

  • Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc, good replacement or upgrade option.
  • 11-Holes standard SSS strat style pickguard, large back shielding.
  • Standard single-coil pickups, ceramic magnet, wax potted, output: 5.7K ohm for neck and middle, 6.0K ohm for bridge.
  • Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws.
  • Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode.
Check Stock

Musiclily 11-Hole SSS Prewired Loaded Pickguard with Dual Hot Rail High Output Pickups Set for Fender Squier Strat Electric Guitar, 3Ply Black

  • Fits US/Mexico Standard Fender Strat or Squier Strat like Affinity series etc. , good replacement or upgrade option.
  • 11-Holes standard SSS strat style pickguard, large back shielding.
  • Dual hot rail single coil sized humbucker pickups, ceramic magnet, wax potted, 9K ohm high ouput.
  • Installed standard strat style knobs, switch, pickups and pre-wired circuit, included pickguard screws..
  • Please check the wiring map in our product images. White wire is hot, any black wire can be the ground, then other black wire is for output jack's negative electrode..
Check Stock

Magnetic Reed Switch MC-32 NC Surface Mount Door Window Alarm, Magneti Door Switch, Contact Sensor, for Home Security and Burglar Alarm Magnetic Reed Switch,Sets of 2

  • 【Package Included】: 2Sets x MC-32 Magnetic Reed Switch.(Mounting screws are includes)..
  • 【Function】: The reed switch is an electrical switch operated by an applied magnetic field. Designed for use with alarm systems. Great for use in family and factory window, door. etc..
  • 【Install Distance】 :Gap between 2 pieces more than 15mm, less than 25mm.White color make home great and beautiful. Anti-fire ABS material..
  • 【Switch Type】: NO means normally open: when the magnet separate, the circuit is conductive( light on ).
  • when the magnet together, the circuit is not conductive ( light off ), NC means normally closed: when the magnet together, the circuit is conductive( light on ).
  • when the magnet separate, the circuit is not conductive ( light off )..
  • 【Reed Switch】:Important : When the magnet is near it makes connectivity, when the magnet is removed connectivity is broken.Wired magnetic door/windows contact can be added to wireless/wired Alarm Systems.(some wireless system has wired zones),Here with our 90-day money back risk-free purchase guarantee..
Check Stock

Nascom - NC1010TW/ST - Stick On Terminal Switch/Magnet Set, Breakoff End Mount Flanges, Snap On Cover (10 Pack)

  • Recessed 3/8" Mini Stubby Press Fit Switch/Magnet Set, Wire Leads - 10 pack.
Check Stock

BNTECHGO 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0122\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 4 ounces(527 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0122"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315\ Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 26 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0157' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 26AWG magnet wire is 4 ounces(323 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 26 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0157"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock