Top Made In Usa Screws Reviews

Shademobile RU22-6275 Accessory Table, Bronze

  • Provides a table surface for your Shademobile Rolling Umbrella Stand.
  • Set at the ideal seating height, 20-inch from the ground.
  • Easily screws onto the Shademobile Universal Center Post. (Universal Center Post has two side knobs) No tools required.
  • Available in your choice of colors bronze or sand.
  • Provides a table surface for your Shademobile Umbrella Stand. NOTE THIS PRODUCT IS DESIGNED TO WORK ONLY WITH THE SHADEMOBILE ROLLING UMBRELLA BASE W/ UNIVERSAL CENTER POST. (Universal Center Post two side knobs).
  • Table sits at the ideal seating height, 20-inches from the ground.
  • Table easily screws onto the Shademobile Universal Center Post. No tools required..
Check Stock

KICKER (2) 45L7R154 15' 3600w L7R Car Subwoofers+Vented Sub Box Enclosure L7R154

  • Package Includes: (1) Kicker 15″ Car Subwoofer. (1) RockvilIe Dual 15 MDF Solo Baric L7/L5/L3 Vented Subwoofer/Car Sub Box. 10 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 12 Feet of 14 AWG Blue Speaker Wire. 2 Spade Terminals. What’s In The Box: (1) 15″ Subwoofer. (1) Owner’s Manual. (2) Kicker Stickers. Features: KICKER 45L7R154 15″ 1800 Watt L7R Car Subwoofer, Solo-Baric Sub 4-Ohm. RMS Power Handling: 900 Watts.
  • Peak Power Handling: 1800 Watts. Dual Four-Ohm Voice Coil. Wrap Around Gasketing. Patented Ribbed Corners. Injection-Molded SoloKon Woofer. 360-Degree Back Bracing. UniPlate Back Plate And Pole Piece. Bumped Back Plate. Thick Tinsel Leads. Large Ceramic Magnet. Steel Basket With Spoke Design. Nickel Plated Speaker Terminals. Sensitivity: 88.05 dB. Impedance: 4-Ohms. Mounting Depth: 8.38″ inches. Mounting Diameter: 13.75″ inches. Minimum Sealed Box Volume: 1.5 cubic feet.
  • Maximum Sealed Box Volume: 3.0 cubic feet. Minimum Vented Box Volume: 3.0 cubic feet. Maximum Vented Box Volume: 6.0 cubic feet. Features: RockvilIe RDVK15 Dual 15″ Vented Square Subwoofer Enclosure. Made to work perfectly with Kicker Solo Baric L7, L5, L3, Hifonics square woofers, and other sqaure woofers. ....
Check Stock

Scotch Permanent Mounting Tape, 1 Inch x 125 Inches

  • This double-side foam tape can be used on most of walls*…ceramic tile, and wood-surfaces. Great for mounting pictures and décor..
  • Faster, safer, and more versatile than screws and nails, this general purpose mounting tape is designed for attaching items up to two pounds to virtually any smooth wall or surface..
  • This double-side foam tape can be used on most of walls ceramic tile, and wood-surfaces. Great for mounting pictures and décor..
  • Faster, safer, and more versatile than screws and nails..
  • This general purpose mounting tape is designed for attaching items up to two pounds to virtually any smooth wall or surface. Made in USA.
  • This double-side foam tape can be used on most of walls* ceramic tile, and wood-surfaces..
  • Faster, safer, and more versatile than screws and nails. Great for mounting pictures and décor..
  • This general purpose mounting tape is designed for attaching items up to two pounds to virtually any smooth wall or surface..
Check Stock

KICKER 45L7R122 12' 1200 Watt L7R Subwoofer, Solo-Baric+Vented Sub Box Enclosure

  • Package Includes: (1) Kicker 12" Car Subwoofer. (1) RockvilIe Single 12 MDF Vented Square Solo Baric L7/L5/L3 Enclosure Box. 10 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 12 Feet of 14 AWG Blue Speaker Wire. 2 Spade Terminals. What's In The Box: (1) 12" Subwoofer. (1) Owner's Manual. (2) Kicker Stickers. Features: KICKER 45L7R122 12" 1200 Watt L7R Car Subwoofer, Solo-Baric 2-Ohm. RMS Power Handling: 600 Watts.
  • Peak Power Handling: 1200 Watts. Frequency Response: 35 Hz - 21 kHz. Dual Two-Ohm Voice Coil. Wrap Around Gasketing. Patented Ribbed Corners. Injection-Molded SoloKon Woofer. 360-Degree Back Bracing. UniPlate Back Plate And Pole Piece. Bumped Back Plate. Thick Tinsel Leads. Large Ceramic Magnet. Steel Basket With Spoke Design. Nickel Plated Speaker Terminals. Sensitivity: 86.7 dB. Impedance: 2-Ohms. Mounting Depth: 6.88" inches. Mounting Diameter: 11.06" inches.
  • Minimum Sealed Box Volume: 0.88 cubic feet. Maximum Sealed Box Volume: 2.0 cubic feet. Minimum Vented Box Volume: 1.75 cubic feet. Maximum Vented Box Volume: 3.25 cubic feet. Features: RockvilIe RSVK12 Single 12" Vented Square Subwoofer Enclosure. Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of ....
Check Stock

Rogue River Tactical Military Veteran Oath Flag License Plate Frame Novelty Auto Car Tag Vanity Gift

  • I Am A Veteran My Oath Never Expires License Plate Frame USA Patriotic Flag Design Military Veteran Flag.
  • Makes A Great gift Idea Fits the Front or The Rear Plate of Any Car or Truck Army Navy Marines or Air Force.
  • Fits All Standard USA License Plates Easy to Install Just Use the Screws that hold you License Plate One ( no screws included).
  • Aluminum Frame Professional Printed Designed To Last Image is Flat and Not Embossed.
Check Stock

Planet Audio 4 AC10D 10 6000W Power Car Audio Subwoofers Power Subs Woofers

  • Package Includes: (1) Planet Audio 10" Car Subwoofer. (1) Rockville Single 10” Vented Sub Enclosure Box. 10 Drywall Wood Screws (Wood screws are the....
  • Features of Planet Audio Sub: Planet Planet Audio AC10D 10" 1500 Watt Dual 4-OHM Car Subwoofer. Peak Power: 1500 Watts. RMS Power: 750 Watts. Mounting....
  • Features of RSV10: Rockville RSV10 Single 10" Vented Subwoofer Enclosure. Proudly Made In The USA, Using Only The Finest Quality Materials - For The....
  • These enclosures are built with the quality additives needed to maximize the performance of any sound system..
  • Complete Single Subwoofer Enclosure Installation Kit!. Includes: 10 Drywall Wood Screws (Wood screws are the type of screws.
Check Stock

Questech 1 Toggle 1 Rocker Combination Light Switch Cover Decorative Wall Plate, White

  • EASY INSTALLATION: Comes with mounting screws and a protective backer for installation using a screw driver.
  • CAST STONE: Made of a light weight cast stone composite which combines real stone with polymers and ceramic.
  • INCLUDED: Switch Plate Cover and coordinating mounting screws, DO NOT OVER TIGHTEN SCREWS.
  • MOLD RESISTANT: Coated with Q-Seal a patented antimicrobial, scratch resistant surface that protects against fingerprints, mold and mildew.
Check Stock

Delaney Exterior Shutter Blind Hinges with 2 Material Options and 3 siding Options, Available with or with Out "S" Hooks (Brick (489100) w/ "S" Hooks 1 Pack, Stainless Steel)

  • Easily installs in stucco, brick, siding and more Adds a "button" to your shutter appearance, One piece vinyl construction fastener..
  • Permanent weatherproof installation, Reverse barbs prevent backing out. Strongest Made in USA.
  • Holds in any material - no studs necessary, No rusting Get Extra Fasteners Pegs/Pins/Screws/Pins with every order ! shutter screws vinyl shutter fasteners shutter spikes plastic shutter fasteners shutter lok.
  • Large head won't pull through shutter - even in high winds.
  • Made in USA Shipped From USA Fast FREE Shipping Included Order yours Today!.
Check Stock

Leviton 88103 1-Gang Duplex Device Receptacle Wallplate, Oversized, Thermoset, Device Mount, White

  • Beach Painting image on a solid metal One Gang Outlet / Duplex Wall Plate..
  • MADE IN THE USA - Outlet Cover Wall Plate - Size: 4.5 x 2.75.
  • Design is directly printed on metal switch plate. Made in USA..
  • UV cured, high gloss finish, protects from abrasions and scratches.
  • Made in the USA. Color matched screws are included..
Check Stock

Culligan UB-1 Mounting Bracket with Screws

  • Mounting bracket for Culligan Whole House Sediment Water Filter HF-360 (1653-3325).
  • The Culligan UB-1 single housing bracket is a “U” shaped mounting bracket for 3/4″ inlet/outlet standard whole house housings..
  • The UB-1 mounts standard whole house water filter housings and helps support the weight of the water filter..
  • Screws are included with the UB-1 mounting bracket for securing the water filter housing to the wall. The screws are No.10 1-1/2″ pan head screws..
Check Stock

2 Power Acoustik BAMF-122 12 3500w DVC Car Subwoofers+Sealed Sub Box Enclosure

  • Package Includes: (2) PA BAMF-122 12" 3500 Watt Car Audio Subwoofer DVC 2-Ohm Sub, (1) Rockville RD12 Dual 12” 1.25 cu.ft. 3/4” MDF Sealed....
  • Features of BAMF-122: Overcompensating Motor Structure for Increased Magnetic Strength, 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics, Vented....
  • Stitched and Glued Surround/Cone Joints for Strongest Bonding, Extended Excursion Polyether Foam Surround w/ UV Protection, Dual Poly-Cotton....
  • Features of RD12: Rockville RD12 Dual 12" Sealed Subwoofer Enclosure, Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best....
  • Includes: 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal), 20 Feet of 14 AWG Blue Speaker Wire, 4....
Check Stock

ASR Federal Genuine Leather Unisex Law Enforcement Badge Holder Wallet Case - Shield, Black

  • POLICE BADGE HOLDER WALLET: Designed for carrying police badges and department issued ID credentials for officers while on duty, there is no credit card compartment. Only a clear ID slot and a recessed badge insert with suede protector flap.
  • RECESSED POLICE BADGE DESIGN: Badge case has a minimal and compact low profile design due to the badge cut-out inlay.
  • the badge attachment is a clip back pin style so no screws are required.
  • QUALITY LEATHER: This leather police badge holder boasts strong and sturdy construction, made from 100% genuine, heavy gauge leather for long last lasting durability.
  • SPECIFICATIONS: Wallet size: 3.5” x 4.5" (W x H).
  • Badge attachment is clip-back pin (no screws required).
Check Stock

Atlas 18 in. Aluminum Marker Tray with Installation Hardware Made in The U.S.A.

  • Our Atlas marker tray features the best heavy gauge satin anodized aluminum for a marker shelf that not only looks attractive but also mounts in a way that is extremely durable and can support the weight you need..
  • Hardware kit included: Our Atlas Tray comes with a hardware installation kit consisting of screws, anchors, and a matching gray cap to conceal the mounting screws and provide a streamlined look..
  • Our Atlas tray was made for applications that require wall installation, for magnetic applications please see our magnetic version of this item, our Magtray marker tray..
  • Pre-drilled holes make for an easy installation, please note, pre-drilled holes are purposely slightly smaller than screws supplied to ensure a tight fit. Steel screws will self-thread through the aluminum using hand force, resulting in a very sturdy installation..
  • Proudly made in the USA with quality, durability, and longevity in mind..
Check Stock