Top Machining Part Steel Reviews

Lathe Center, MT2 Precision Rotary Live Tailstock Center Morse Taper 2 Milling Center for Lathe in Medium Speed and Medium Load Environment

  • Quenching Hardness 60 ~ 62 HRC: Conical part is made from T10 steel, quenching hardness 60 to 62 HRC, the main body part is made from high-quality steel, durable to use..
  • Ultra Precision: High quality bearing design, using high speed bearing for high accuracy. Accuracy is less or equal to .0005..
  • Application: The primary use of a center is to ensure concentric work is produced.
  • this allows the workpiece to be transferred between machining operations without any loss of accuracy.Designed for lathe in medium speed and medium load environment. Maximum RPM is 5,000.
  • High Steel Quality: Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe. ust proof seal preventing cutting dust enter into bearing thus prolong service time..
  • Shipping: This item will ship from USA ,delivery time need about 4-7 days.If there is any questions please feel free to contact with us, our experienced customer service team will response in 24 hours..
Check Stock

BONYTOOL Dovetail Milling Cutter HRC55 Coated Tungsten Steel Carbide Slotting End Mills 75° 60° 45° Chamfering CNC 4 mm -60°

  • Material: Tungsten steel, high hardness and good toughness.
  • Rugged construction, durable with long service life.
  • Milling cutter end mills machining hardness: HRC up to 55 degree.
  • Applicable machine tools: CNC machining center, CNC machine tool, engraving machine, fine engraving machine, high speed machine, etc.
  • Applicable materials: stainless steel, die steel, ductile cast iron alloy steel, mixing steel, titanium alloy, etc..
Check Stock

GAR S-22 22 Speciman Surface Roughness Comparator AS9000 Compliant

  • Pocket size gage with 22 precision surfaces for specifying and controlling surface finishes.
  • There are twenty two replicated machined surface finish specimens with examples of six different machining processes: lapped, ground, blanchard ground, shape-turned, milled and profiled - ranging from 2 to 500 microinches.
  • The S-22 conventional machining microfinish comparator is rectangular in shape (2" x 5 3/8") and is a corrosion resistant electroformed nickel duplicate of actual machined surfaces.
  • Supplied in a leatherette case with engineering data and instructions.
Check Stock

TE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20401 Machinist Clamp Kit, 9/16\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 9/16" machine tool table T-slot to fit 9/16" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20402PL Machinist Promo Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

3PCS BAP300R C10-10-120-1T/C12-12-130-1T/C12-13-130-1T 1Flute Indexable End Milling Holder+ 6PCS APMT1135PDER CNC Inserts+3PCS T8 Wrench (3PCS 300R End Milling Holder)

  • * Package includes ：1PCS 300R C10-10-120-1T +1PCS 300R C12-12-130-1T+1PCS 300R C12-13-130-1T+ 6PCS APMT1135PDER + 3PCS T8 wrench. If you need more APMT1135PDER, please search ASIN：B097RG372M..
  • * High performance replaceable inserts, anti-seismic high-quality alloy steel, can effectively suppress vibration..
  • * It is suitable for rough machining, finish machining, digging machining, groove machining and cutting machining..
  • * The screw offset fastening design makes the inserts and groove closely combined, enhances the rigidity, and the processing effect will be better..
  • * The handle strictly abides by the process of first vacuum quenching and then tapping to avoid the deformation caused by first tapping and then quenching. It is firm and durable and can prolong the service life..
Check Stock

Center Drill Bits Kit 1.5/2/2.5/3/4mm Center Drill Bit 5pcs High Speed Steel Center Drill Bits 60 Degree Center Drill Bit for Hole Processing

  • [Prefabricated Precise Positioning]: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • [Light Cutting and Good Chip Removal]: It has the advantages of light cutting and good chip removal.
  • When machining a center hole with a diameter of 2-10mm, this center drill is usually used.
  • [5 Center Drill Bits]: This 60 degree center drill bit has 5 center drill bits, which can be used to drill holes of different sizes.
  • [Made of High-speed Steel]: This center drill bit is made of high-speed steel, with high hardness and good wear resistance.
  • [Widely Used]: This center countersink drill bit can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock

Panther Marine 55-2600 Auxiliary Motor Steering Kit - Stainless Steel

  • Brand New RockJock Jeep TJ/LJ/XJ/MJ/ZJ Currectlync Steering System (Part #CE-9701).
  • Compatible with: 1997-2006 TJ/LJ Jeep Wranglers, 1984-2001 XJ Cherokee, 1993-1998 ZJ Grand Cherokee, 1985-1992 MJ Comanche.
  • The RockJock Currectlync heavy duty tie rod and drag link system for TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 1/4″ diameter forged alloy drag link, and 1 1/4″ solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8″ thread tie rod ends with boots are included as well as the RockJock heavy duty steering stabilizer bracket..
  • This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components..
  • NOTE: This unit is designed to be used on vehicles with 4″ of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2″ bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment..
Check Stock

Wisamic 11 Pcs 5/16 inch Carbide Tipped Cutter Set for Metal Lathe Turning, Boring, and Chamfering

  • 2 pieces: 4-7/8" long Cranked Boring Bars.
  • Made of drop forged tool steel with tungsten carbide tips..
  • Can be resharpened & reshaped for many times..
  • Suitable for machining mild steel brass copper and plastics..
  • For metal lathe, mini lathe, milling other general machining operations such as turning & boring..
Check Stock

20 PC 1/4 C2 & C6 Carbide-Tipped Tool BIT Set Single Point BRAZED Lathe KIT

  • Set contains 20 pcs 1/4" premium carbide tips- 10 pcs C2 grade (for cast iron, brass, and similar materials) and 10 pcs C6 grade (designed for long tool life in steel, alloys, & harder materials).
  • 2 Pcs C2 & C6 each- Style AR & AL- For general machining applications, turning, facing, boring and chamfering. Cuts to a square shoulder..
  • 2 Pcs each Style BR, 1 pc each Style BL- For general machine applications where a 15-degree lead angle is desired.
Check Stock