Top Mac Mini A117power Supply Reviews

Vaydeer Mac Mini Stand Space Gray ABS Plastic Dock for Mac Mini, 8-in-1 Dock Station Holder with Power Adapter, USB 3.0 Ports/USB Hub for Data Transfer TF/SD Card Reader HDD/SSD Slot Audio Jack

  • 【Better Heat Dissipation】VAYDEER Mac Mini mount not only does it help your mac mini take up less space, but also gives your mac mini more surface exposure. It effectively allows better air ventilation to keep your mac cooler, avoid over heat, thus extend the service life of your computer..
  • 【Extra Storage with Power Boost】Not only can this Mac Mini dock extend the USB ports, but also supports storage extension. You can install an extra 2.5-inch SATA HDD or SATA SSD inside the base of the dock and you can even offer extra power to this dock for the HDD or SDD to work steadily via the free power adapter we send you. All your devices will get enought power to work perfectly..
  • 【Stable & Anti-Scratches】This Mac Mini usb hub fits Mac Mini like a glove. It holds the unit sturdily and securely. The slot inside has soft rubber padding to prevent scratches on your Mac Mini. And the on/off button is fully accessible around the corner on the top left portion of the computer. NOTICE:THE COLOR OF THIS DOCK IS SPACE GRAY, NOT SAME WITH THE COLOR OF THE MAC MINI M1..
Check Stock

REXQualis Nano V3.0, 3pcs Nano Board CH340 / ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 with 3 Cable)

  • √ REXQualis Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system..
  • √ REXQualis Nano is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • √ REXQualis Nano is Using Atmel Atmega328P-AU MCU, Support ISP download and USB download, Power via the Mini-B USB..
  • √ The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Check Stock

WJESOG 1x2 Mini Displayport to Dual HDMI Splitter Adapter,MDP to 2 HDMI Hub Multi Stream Transport Support 4K Resolution Support MST，SST

  • 【Special Instructions】 GPU/graphics card that supports more than 2 external displays is required.
  • Mini DisplayPort 1.2 GPU/graphics card is required.
  • Intel HD Graphics is limited to 3 external monitors.
  • not compatible with Microsoft Surface Dock..
  • 【MST/SST】 This product can split a Mini DP signal into two 2 HDMI signals. It can support mirroring and expansion mode under Windows system, and only support mirror mode under Mac system..
  • 【HD Resolution】 Supports Mini DP 1.2 input and HDMI 1.4/2.0 output, supports [email protected] resolution when only a single HDMI port is used, and only supports [email protected] resolution when two HDMI ports are used at the same time.
  • 【Micros USB power supply】 The package includes a Micro USB power supply cable to ensure that the product can work stably.
  • 【Safe and Simple】Easy to install, no need to install any driver, just plug and play. If you encounter any problems during use, you can contact us through.
Check Stock

Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino

  • ...Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

DORHEA 4Pcs for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Micro USB Microcontroller Board with PIN Headers Pin Unsoldered Compatible with Electronics Development Board Nano 328P Nano 3.0

  • The Nano for motherboard can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality..
  • It is a smallest, complete and breadboard friendly board. It has everything that board has (electrically) with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system..
  • More breadboard space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • This board is using the chips ATmega328P and CH340, not FT232, Support ISP download.
Check Stock

mSATA Adapter, ELUTENG mSATA to USB 3.0 Adapter, USB mSATA SSD Reader, 50mm Mini SATA Converter as Portable Flash Drive External Hard Drive (No Cable Needed)

  • This mSATA to USB 3.0 adapter is suitable for those mSATA SSDs that have been eliminated after upgrade. It can be used as a USB flash drive to expand your external storage space for your Laptops or desktop computers..
  • Note: This adapter card only supports mSATA SSD (3cm*5cm), and does not support SATA Mini PCIE/PATA mini PCIE/RAID MINI PCIE SSD. Only fit for SSDs with current less than 1.5A. If it is a new hard disk, please format it before use, otherwise it may not be recognized by the computer..
  • Adopt ASM1153E chip, Great compatibility, it supports 512GB SSD and all major platforms with great stable signal and powerful power supply..
  • USB3.0 read and write speeds up to 200Mb/s +.
  • Read and write speed with UASP can up to 400Mb/s +. Note: To achieve UASP acceleration, please make sure that your computer supports UASP. Currently, UASP-enabled systems include Win 8 and Mac OS 8&9 (the actual speed depends on your SSD speed.).
  • Directly plugged into the USB port of the PC, no USB cable is needed, the loss is reduced, the signal becomes more stable, and the power supply is more powerful..
Check Stock

Odyson - AC Power Cord Replacement for Apple Mac Mini A1993 (2018), A2348 (M1, 2020)

  • Power cord with a sleek black finish for the Mac mini model A1993 and Mac mini M1 model A2348..
  • This power cord can be used with a variety of other devices, including all model A1347 Mac mini desktop computers..
  • Power cord is 6ft (1.8m) in length with 2-prong plug for US outlets..
Check Stock

The Complete Country Guitar Method Compilation: Three Books in One! - Master Country Guitar Licks, Techniques & Soloing (Learn How to Play Country Guitar)

  • ...Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check Stock

Mini Displayport to Dual HDMI, MDP 1.2 to 2 HDMI Splitter for Extended Displays, Mini DP Docking Staion Dual Monitors, HDMI Hub Support 4K@60Hz, MST, SST, for laptop, PC, Monitor, Projector and More

  • Important Tips: Mini displayport to HDMI 4k 60Hz adapter comes with a Micro USB power supply cable (40.55inches/103cm) to ensure that chip of the product can work. ⚠️*Please note the micro USB cable must be connected with the power and this HDMI hub before use, you can connect this micro USB cable to 5V 1A adapter or to the micro USB port of the device..
  • 2 EXTERNAL DISPLAYS: Our MDP to 2 HDMI Hub support to connecting two displays to your system through a single Mini DisplayPort 1.2 output, work as a splitter in mirror mode, extended mode, or expand mode joining multiple screens together as one. Note: Mac OS/iPad OS/Chrome OS does not support MST technology and you will get 2 mirrored displays instead of 2 independent displays when used with Mac OS!.
  • 4K Dual Screen: Mini dp to dual hdmi adapter enables you to mirror or extend the display of your camera/laptop/etc to your TV, projector or monitor in up to 4K UHD ([email protected]) resolution. you can split-screen to have multitask operation and improve your working by extend mode, you can also use the mirror display mode to show the same content on two screens and give you a better visual experience, make you en....
Check Stock

4 Ports PCIE USB 3.0 Card Super Speed 5Gbps PCI Express (PCIe) Expansion Card for Windows 11/10/8.1/8/7/Vista/XP/Server

  • Adding 4 USB 3.0 ports on your desktop computer by PCI Express(1X) slot.The super fast USB 3.0 ports adopting advanced NEC chipset will provide 5Gbps max data(total) transfer speed for video,audio,photos or files..
  • Doesn’t require additional power,each port owns individual 2A power supply (8A in total) to meet high power-consuming data device’s demand, easy to install 2 port PCIE port..
  • 4X added power module provide 4 ampere current ensure adequate power supply for USB device.2X electric circuit protector and voltage stable capacitance protect data and device safety than ever..
  • NOT support MAC OS, Linux and GPU, applicable for PCI Express X1,X4,X8,X16 slot..
  • This USB card offers plug&play simplicity on Windows 11,10,8.1,8(32/64bit) and Windows Server 2012,2012R2,2016,2019, For Windows 7, XP, Vista and older systems, the card comes with a mini-CD with the necessary drivers..
Check Stock

Mini 6 Pin to 8 Pin PCI Express Video Card Power Adapter Cable for Mac Pro Tower/Power Mac G5 14-inch 35cm Pack of 2 COMeap

  • 『Mini 6P - PCIe 8P』Mini 6 pin male end to plug into the Mac motherboard (NOTE: the end is mini 6 pin, not stanard 6 pin size.), PCIe 8 pin male....
  • 『Compatibility』ONLY compatible with Mac Pro, Power Mac G5 and all Mac Pro Models including: (1,1),(2,1),(3,1),(4,1),(5,1) or....
  • 『Note』This cable was only designed for Mac Pro models as listed in the 2nd Point. Please carefully check your PC type or contact us if you are not....
  • 『Connector』Connector A: 1x mini 6 pin male, Connector B: 1x PCIe 8 pin male.
  • 『Parameter』Gauge: 1007-18AWG(standard tin-coating copper wire), Length: 14-inch(35cm), Rated power: 300W, Quantity: 2pcs, Self-adhesive tape*1pcs.
Check Stock

TeamProfitcom Dual Mini 6 Pin to 8 Pin PCI Express Video Card Power Adapter Braided Sleeved Cable for Mac Pro Tower/Power Mac G5 15-inches

  • Connector 1: standard GPU 8 Pin male . PCIe 8 pin male end to plug into the video graphics card - photo #2.
  • Connector 2 : 2x mini 6 pin male ( not standard 6 pin male) !!! Dual mini 6 pin male end to plug into the Mac motherboard (NOTE: the end is mini 6 pin, not stanard 6 pin size) !!! - photo #3, photo #4.
  • Compatible with Power Mac G5 and all Mac Pro Models including: (1,1) - (5,1) or (2006) - (2012).
  • Connects a PCIe video graphics card with GPU 8 pin port to Mac motherboard with mini 6 pin port.
  • This cable was only designed for Mac Pro models as listed in the 2nd Point !!! Please check your PC type or contact us if you are not sure about it..
Check Stock

VONETS 2.4GHz WiFi Module/Mini Router/WiFi to Ethernet Bridge/Hotspot Signal Repeater/Extender/Amplifier/AP, USB/DC Powered with 2 RJ45 Ports for DIY Industrial Engineering Network Device VM300-H

  • 【WiFi to Ethernet or Ethernet to WiFi convert】Industrial Mini 2.4GHz WiFi Module/Mini WiFi Router/Wireless Ethernet Bridge/Repeater (small size).
  • Can achieve WiFi to Wired or Wired to WiFi function.
  • Support WiFi 802.11b/g/n, WiFi rate:300Mbps.
  • 2 Ethernet ports 10/100Mbps adaptive (USB/DC power supply cable.
  • 【Support wide voltage】DC5V-15V(Typical 5V/1A, ripple less than 100mV), two-stage automatic overvoltage protection (Protection voltage upper limit 15.5V), USB or DC optional powered mode.
  • the suggestion is: this device cannot use the USB or DC directly plugged into the computer for power supply, it needs to be powered by an independent standard 5V/1A power supply..
  • 【Support two kinds of application methods】: Router mode.
  • WiFi Bridge ( IP layer or MAC layer transparent transmission).
  • WiFi Repeater (WiFi signal repeater), can extend WiFi transmission distance.
  • 【WiFi hotspot automatic reconnection】two hotspot matching methods: Full match authentication mode, SSID and password authentication mode, Support SSA signal strength detection reporting function, motion detection function and memory hotspot(Up to 100) automatic matching connection fu....
Check Stock