Top M Lok Slot Covers Reviews

Gotical 3 Slot M-LOK Picatinny Rail Section Three Slots for M-LOK Handguard M-LOK Rail with Set of Screws & Allen Wrench M-LOK Picatinny Accessory Rail (Pack of 4)

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc..
M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges..
All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
INCLUDE - 2 Piece 3 Slot Rail And Screws.

Check Stock

Magpul M-LOK Cantilever Rail/Light Mount, Aluminum

Designed for use with all M-LOK mounting surfaces.
Allows the attachment of various MIL-STD-1913 Picatinny spec rail-mounted accessories such as lights and optics, and directly interfaces with the popular Surefire M300/M600 series Scout Lights or Magpul Light Mount V-Block and Rings.
Picatinny slots extend forward .75"-1.5" past the M-LOK mounting slot to improve ergonomics and optimize accessory positioning in a wide variety of uses.
Keeps lights and accessories low to reduce the firearm's profile.
All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
3 MIL-STD-1913 Slots, max overall length of 3.15 in.
Available in either heavy-duty reinforced polymer or milspec-anodized aluminum.

Check Stock

Monstrum Tactical Aluminum M-LOK Picatinny Rail Pack | Includes Two 2-inch and Two 3-inch Rail Sections | Black

Included in this M-LOK Picatinny Rail Section Pack are two 2.2"/3 slot rail sections and two 3"/5 slot rail sections..
Crafted from lighweight aerospace 6061 grade aluminum..
Rails installs to any M-LOK mounting platform, allowing for fast modular attachment of grips, bipods, sights, or other accessories..
All Monstrum Tactical mounts and accessories comes with a lifetime guarantee..

Check Stock

Streamlight 88059 ProTac Rail Mount 2 625-Lumen Weapon Light with CR123A Batteries and Remote Pressure Switch, Tail Switch, Clips, Black, Box & Magpul M-LOK Polymer Picatinny Accessory Rail, 3 Slots

Machine aircraft aluminum with anodized finish.
Designed for use with all M-LOK compatible hand guards and forends, our 3-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc..
Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges..
All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included..
3 usable slots and a max overall length of 1.6"..

Check Stock

West Lake Keymod Picatinny Rail Sections, 3-Slot 7-Slot 11-Slot, Solid Aluminum Single M-LOK Keymod Dual Compatible Multi-Functional Rails (Black)

【Dual Compatibility】 Set of three Picatinny rail sections to allow for a wide range of tactical accessories on airsoft rifles with M-LOK or Keymod systems..
【Multi-functional】 Versatile design with practical usability in mind. The 3-slot section is equipped with a QD sling swivel port. The 7-slot and 11-slot sections feature a belt buckle interface. All sections allow for HK snap hook attachment at both ends..
【Solid Quality】 Precisely machined with high strength Aluminum alloy, with hard non-rust anodized finish..
【Aggressive Looks】 Skeletonized cut-outs to minimize weight and produce an aggressive accent..
【Easy to Install】 One Allen Key and mounting screws with spares (8 sets for Keymod and 8 sets for M-LOK, 16 sets total) are included..

Check Stock

HooGou 5 Slots Picatinny Weaver Rail Section Aluminum for M-LOK/MLOK Handguards Compatible Systems Mount (1 Pack)

Material: 13 Slots Picatinny / Weaver Rail is made of high quality 6061 aluminum, dark earth and hard anodized coating..
13 slot m-lok Picatinny rail section fully compatible with any m-lok mounting adapter.
EASY TO INSTALL - The Picatinny fabric rail mount is quick and easy to remove or install and the mod nuts come with bolts and Allen wrench for a custom fit..
13-slot Picatinny Rail design allows you to add to any standard Picatinny or Weaver ar accessories such as the MK Handguard rail section accessory ideal for attaching lights, lasers, optics and bipods..

Check Stock

MLOK Arca Rail Tripod Mount Adapter for Rifle Tripod Ballhead Quick Release Plate,Compatiable RRS Dovetail 4 M-LOK Slot Interface

Precision machined from solid blocks of 6061-T6 without excess weight, long time hard anodized treatment for higher durability, screws and T-nuts are....
The semi-permanent plate incorporates a 1.5" dovetail fully compatible with the Arca-Swiss and RRS standard dovetail quick-release clamps and....
Mounts directly to M-LOK compatible systems, recoil and impact mitigation lugs, functional snag-resistant beveled edge..
Removable stop screws to ensure a non-slip mounting point while firing heavier recoil platforms..
4-slot M-LOK interface RRS / ARCA，length, max: 140 mm / 5.51 in..

Check Stock

MLOK FLM 1' Flashlight Mount - 1.03' Internal Diameter MLOK Nuts, Screws, and hex Wrench (Pack of 1) (Pack of 1)

100% CNC machined out of 6061 billet aluminum. 1.03" internal diameter designed to fit any 1" flashlight. Mount can be placed at 1,5,7, and 11 o'clock positions..
Includes M-LOK nuts, screws, and hex wrench. M-LOK is a modular locking accessory mounting system developed by Gotical..
Adjusts in 1/2 slot increments for precise accessory placement. No access to back side of the rail is required..
Accessories can mount with either end facing forward..
Works with both metal and polymer accessories..

Check Stock

Monstrum F50 100 Lumens M-LOK Flashlight with Detachable Remote Pressure Switch

Lightweight tactical flashlight with a built-in M-LOK adaptor base designed for modular attachment to M-LOK equipped firearms.
100 lumens LED bulb powerful enough for indoor and close range outdoor use.
Can be used with or without the included remote pressure switch.
M-LOK adaptor is compatible with the standard M-LOK mounting platform and comes with all necessary mounting hardware.
Attaches directly to your M-LOK mounting system with no extra adaptors or added bulk, providing a seamless and low profile addition to your rifle....

Check Stock

TuFok M lok Picatinny Rail Adapter - Picatinny Rail Mount Rifle Rail Attachment with 3/8 Sling Swivel Socket for Two Point Sling 9-Slot,Black,Aluminum

Design for the use with all compatible standard MLOK handguard system with 3/8" qd sling mount socket..
Precision machined out of premium T6-6061 aircraft aluminum alloy & high strength steel in black matte anodizing finish, offer durable safe....
Allows the attachment of various 1913 Picatinny spec rail-mounted accessories, such as bipod mount, light, red dot, scope, laser and qd s-ling mount....
Easy to install with all hardware necessary (9-slot rail, 2 matched screws, 1 allen wrench)for attachment directly to M-LOK system is included..
Light weight and great fit to the m-lok system, also holds the sling strap attachment securely, without adding too much useless weight and bulk when....

Check Stock

Monstrum M-LOK Accessory Pack | Includes 2-inch 3-inch 5-inch Rail Sections | Flashlight Sling and 45 Degree Offset Mounts

Included in this M-LOK Accessory Pack are: one 2 inch, one 3 inch, and one 5 inch M-LOK to picatinny rail section | one 1 inch diameter flashlight....
Accessories install to any M-LOK mounting platform, allowing for fast modular attachment of grips, bipods, sights, flashlights, slings, or other....
Package includes all necessary screws and locking nuts, plus a hex wrench. No additional tooling is required for installation..
Dedicated M-LOK flashlight and sling mount install seamlessly to M-LOK mounting platform without intermediary rail section.
All Monstrum mounts and accessory products comes with a lifetime guarantee..

Check Stock

Guide Panels Compatible with MLOCK, 12 Pack in Black

Cable clips provide for clean placement of weapon light pressure switch cables on your M-LOK mounting platforms.
Loose and messy cables lock into place at your preferred position in the grooves along the side of the clip.
Cable clips are compatible with the M-LOK mounting platform and with all major flashlight pressure switch manufacturers.
Includes three M-LOK cable clips and all necessary M-LOK mounting hardware.
Available in 6061 grade aluminum or lightweight polymer material.

Check Stock

Magpul Industries RVG M-LOK Panel Black Fits Adapter Rail

The perfect multi-slot Rail：3-Slot 5-Slot 7-Slot 13-Slot Rails Designed for Use with All Compatible Standard Handguards, Four Different Lengths Give You 4 Choice. Rails are Essentials for Hunting Shooting! [Note:Not for Keymod Systems].
Ideal for Attaching Kinds of Picatinny Accessories：can use for a lot of accessies such as flashlights, red green dot sights, scopes, bipods or other tactical accessories..
Easy Installation and Take-down：Install These Screws by Come with Allen Wrench Tool, Simple To Install or Remove. Pacakage included 3 Allen Wrenches,9 M-LOK Screws and Locing Nuts..
Lightweight & Solid-Style：Super Lightweight Rails with Solid Aluminum Structure and Low Profile Design Reduces Bulk, 3-Slot Only 0.39Oz,5-Slot 0.46Oz 7-Slot 0.71Oz, ,13-Slot Weight 1.31Oz, Without Adding Too Much Useless Weight and Bulk When Hunting..
Costumer Service：We make a promise of full 1-year warranty, which means that you can get a full-refund or a new replacement if you found any problems on products we sold. Please inform us of questions and we could work them out as soon as possible. Hope you could feel our sincerity..

Check Stock