Top Luxury Series Muffler Reviews

TOTALFLOW 20019 Straight Through Universal Exhaust Muffler - 409 Stainless Steel - 3 Inch Inner Diameter Inlet / Outlet

  • Aluminium construction --Aluminized steel construction and internal drainage system for maximum durability，Internal partitions with the change of temperature, the deformation is reduced by thermal expansion and cold contraction.
  • Noise reduction performance--Factory-style using aerodynamics sound absorbs unwanted interior resonance to reduce radiated noise，OE-style domed heads Make the noise lower.
  • High-quality-- Internal partition wall and high quality material make it have the characteristics of high temperature resistance,Factory-style Welded structure provide stability and longer service life.
  • Muffler size--3'' muffler| Body Length: 13"| Overall Length: 19"| Body Height: 4" | Body Width: 9.5" |.
  • Universal automotive replacement exhaust muffler-Floshine 40 series 3 inch muffler are suitable for most vehicles, including trucks, off-road vehicles and pickups, and can even be used on generators to reduce noise. They can be installed with Floshine clamps or welded to connect the exhaust pipe to the 3 inch exhaust muffler.
Check Stock

NEW FLOWMASTER SUPER 44 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,2.50" DUAL OUT,BLACK FINISH

  • Brand New Flowmaster Super 44 Series Chambered Muffler, 3.00" Center In, 2.50" Dual Out, Black Finish (Holley Part #9430452).
  • Flowmaster Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing 4" case street muffler we have ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
  • Features: Race proven Delta Flow technology | Recent 2 chamber improvement | Noticeable interior resonance | Deep Aggressive Sound Exhaust Note.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

KAJIMOTOR Slip on Exhaust Motorcycle Muffler Tail Link Exhaust Midpipe System for Suzuki GSXR 600 GSXR 750 2006 2007 with Removable DB Killer Black

  • 【Suitable For】:Motorcycles exhaust pipe fit for Suzuki GSX-R600 GSX-R750 2006 2007..
  • 【Advantage】:Made of stainless steel.Make the muffler exhaust looks luxury and attractive..
  • 【Great Sound】:This exhaust slip on muffler sounds great..
  • 【Easy To Install】: The muffler exhaust relatively simple installation,Without looking at any instructions.No welding is required,The whole process should take you around 10-15 minutes..
Check Stock

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,3.00" CENTER OUT,BLACK FINISH

  • Brand New Flowmaster Super 10 Series Chambered Muffler, 3.00" Center In, 3.00" Center Out, Black Finish (Holley Part #843015).
  • Super 10 Series 409S stainless steel, single chamber mufflers. Intended for customers who desire the loudest & most aggressive sound that they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver maximum performance. Constructed of 16 gauge 409S stainless steel & fully MIG welded for maximum durability..
  • Features: Intended only for off-road or race applications | Delta Flow Technology | 409SS Stainless Steel Construction | Super 10 Sound Level.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

YOSAYUSA Motorcycle Exhaust Slip On Muffler Baffle Silencer for Honda Grom MSX125 Low Mount Exhaust 2013 2014 2015 2016 2017 2018 2019 2020 2021 (with Removable DB Killer)

  • Slip on Muffler Exhaust Compatible with Grom MSX125 2013 2014 2015 2016 2017 2018 2019 2020 2021.
  • This exhaust muffler sounds great, with Removable DB Killer, it's a good upgrade to increase the power performance for the motobike.
  • There are no instructions included in this kit. Professional Installation Is Highly Recommended！.
  • The glossy black surface makes the muffler exhaust looks luxury and attractive..
  • We always stand behind our high quality Products & Services, please do not hesitate to contact us if you have any unsatisfied experience on our product, we will provide friendly, easy-to-reach support for you.
Check Stock

Flowmaster 817706 Outlaw Extreme Kit Base Product

  • single 3" /dual 2.5" Flowmaster 40 Series Muffler.
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged.
  • Multi-depth insulated hangers & muffler clamps.
Check Stock

Flowmaster Original 40 Mandrel-Bent Dual Truck Exhaust Kit with Chrome Tips

  • single 3" /dual 2.5" Flowmaster 40 Series Muffler.
  • Two 2.5" Mandrel-bent tailpipes, cut and swedged.
  • Two 3.5"x18" WELD-ON angle-cut chrome tips.
  • Multi-depth insulated hangers & muffler clamps.
Check Stock

BBR Tuning Racing Series DIO Cylinder Body & High Performance 21mm OKO Carburetor Assembly

  • ...inder body with a high performance reed valve intake system, this race assembly was made for race engines in mind..
  • PORTED CYLINDER: Unlike other cylinders, the BBR Tuning Racing Series DIO Cylinder Body is ported to allow maximum fuel and air mixing within your motor. The exhaust port can fit nearly any performance muffler as well as any stock exhaust muffler you want to run, which the intake port is specifically designed to accept the reed valve assembly included with this kit.
  • BOOSTS POWER: With a 32mm opening, you’ll be able to fit hardcore racing carburetors like the BBR Tuning High Performance 2-Stroke OKO Style Carburetor without a single problem. With the right carburetor, this reed will deliver tons of fuel and air to your motor and give you higher speeds and even more torque..
  • COMPLETE KIT: The BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly is paired with a 21mm OKO Race carburetor is racer’s dream setup- get ready for a bike that’ll scream whenever you hit the gas!.
  • INCLUDES: Modified BBR Tuning Racing Series DIO Cylinder Body BBR Tuning Racing Series 6 Flap Reed Assembly BBR Tuning 21mm OKO High Performance Carburetor Manifold 1x Racing Air Filter 1x Angled throttle cable retainer 1x Slow Jet 1x Main Jet 1x Length of throttl....
Check Stock

Sparks Racing X-6 Stainless Steel Race Core Full Exhaust - Compatible with Honda Trx400ex

  • The Big Gun Evo Racing Series was designed to deliver maximum horsepower and torque gains throughout the RPM range..
  • Made from .049 stainless steel tubing and an aluminum muffler canister, the Evo exhaust system is much lighter than stock units..
  • Our sleek muffler design also allows for maximum clearance to avoid your exhaust from hitting the rear brake caliper..
  • 96-98dbs track and trail legal (with Vortex insert sold separately)..
Check Stock

Flowtech 50225FLT Purple Hornies Glasspack

  • Heavy gauge shell for maximum durability.
  • Expandable bushings for custom applications, Available stainless steel or painted.
  • Continuous Roving Fiberglass for powerful tone and long life, Straight through design for maximum flow and power.
  • Muffler Body Height: 3.5″, Muffler Body Length: 26″, Muffler Body Width: 3.5″ , Muffler Body Material – Aluminized, Muffler Inlet Configuration – Center, Muffler Outlet Configuration:Center,Muffler Outlet Connection Type: Pipe Connection,Muffler Outlet Diameter:2.25″.
  • Muffler Inlet Connection Type: Pipe Connection, Muffler Inlet Diameter: 2.25″, Muffler Inlet Diameter Designation: Inside Diameter , Muffler Overall Length: 31″ , Muffler Shape:Round.
Check Stock

ISTUNT Universal 51mm Slip-on Modified Motorcycle Exhaust Pipe Muffler

  • ✔ Dirt Bike Muffler Universal for Dirt Bike, Street Bike, Scooter, ATV, Quad and Any Other Bike with Pipe Diameter 38-51 MM..
  • ✔ Slip On Exhaust Fits for 400cc and Below Displacement. Removable DB Killer Offers Difference Sound Effect..
  • ✔ Attention: In Daily Use, Try to Avoid Water Entering the Exhaust Pipe and Keep the Exhaust Pipe Clean. Do Not Slam the Accelerator on the Spot for a Long Time and Resist Driving under Heavy Load, Which Will Cause the Color of the Muffler to Turn Blue or Yellow..
  • ✔ Attention: If the Exhaust is Modified, the Oil from the Carburetor Will Be Sprayed on the Exhaust Pipe When Riding a Motorcycle. If It is not Cleaned for a Long Time and Encounters High Temperature, the Exhaust Pipe Will Spout Fire or Even Burn..
  • ✔ The Body is Made of Stainless Steel Covered with Carbon Fiver Color Vinyl that Make the Exhaust Looks Luxury and Attractive. Manufacturer Warranty for 90 Days from Date of Purchase..
Check Stock

AP Exhaust 301200S Glasspack Muffler

  • Heavy gauge shell for maximum durability.
  • Expandable bushings for custom applications, Available stainless steel or painted.
  • Continuous Roving Fiberglass for powerful tone and long life, Straight through design for maximum flow and power.
  • Muffler Body Height: 3.5", Muffler Body Length: 26", Muffler Body Width: 3.5" , Muffler Body Material - Aluminized, Muffler Inlet Configuration -....
  • Muffler Inlet Connection Type: Pipe Connection, Muffler Inlet Diameter: 2.25", Muffler Inlet Diameter Designation: Inside Diameter , Muffler Overall....
Check Stock

Yoshimura 12130A5500 RS-3 FULL SYSTEM fits 2019-2020 Honda Monkey 125, 12130A5500

  • The CRF's new engine and muffler configuration gave Yoshimura the opportunity to create an entirely new system built specifically for the new Honda machines.
  • Introducing the all-new Signature Series RS-9T tapered dual muffler exhaust system for the all new CRF Hondas.
  • Yoshimura has been working tirelessly on development with American Honda HRC's engineers to achieve maximum performance and mass centralization, to optimize rider usability.
  • Working with HRC race engineers and the all-new engine and its unique downdraft fuel injection system, Yoshimura was able to deliver an exhaust that provides more tractable power and improved torque.
  • Image is for reference only, actual product may vary based on the part number and fitment.
Check Stock