Top Ls Manifold Clamps Reviews

A-Team Performance - Intake Manifold 102mm Throttle Body Fabricated Metal Sheet - Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 Silver

  • Intake Manifold 102mm Throttle Body Fabricated TIG Welded Aluminum Metal Sheet.
  • Compatible with Cathedral Style LS1 LS2 LS6 4.8/5.3/5.7/6.0 Heads.
  • Includes: Black Intake Manifold, Black Throttle Body, Black Fuel Rails, and Fuel Crossover Line.
  • This intake is about 2" taller than stock.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Mid Valley - 102mm Intake Manifold & Throttle Body For Cathedral Port Heads LS1/LS2/LS6 LS Based Engines Fits Chevrolet Corvette Chevy SSR Cadillac CTS Pontiac GTO Firebird Saab 9-7X

  • Fits LS Based Engines with Cathedral Port Heads LS1/LS2/LS6 heads 6.0L 5.6L 5.3L 4.8L)Chevrolet Small Block V8 GEN. III/IV(LS-Based)4.8L / 293 CI (LR4).
  • Fits 1997-2004 Chevrolet Corvette , 1998-2002 Pontiac Firebird Formula, Trans AM , 2001-2004 Corvette Z06 , 2004-2005 Cadillac CTS V-series, 2005-2007 Chevrolet Corvette ,2005-2006 Chevrolet SSR ,2006-2009 Chevrolet TrailBlazer SS , 2006-2007 Cadillac CTS V-Series,2005-2006 Pontiac GTO,2008-2009 Saab 9-7X Aero.
  • Package including:Intake Manifold, 102mm Throttle Body, Gaskets, Hardware, Fuel Rails, Fuel Crossover Line. Extra Spacer on throttle body has been included ..
  • Intake Manifold Height: 9.00 inches (approx. 3 inches higher than stock).
  • Fabrication by Tig Welded Aluminum .One year warranty available..
Check Stock

A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated - Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 EFI Black

  • Intake Manifold with 102mm Throttle Body Fabricated 3mm Sheet Metal ..
  • Compatible with cathedral style LS1 LS2 LS6 4.8/5.3/5.7/6.0 heads.
  • The intake will not bend or flex with Boost Or Vacuum..
  • Includes Black Intake Manifold, Black DRIVE BY CABLE Throttle Body, Gaskets, Hardware, Black Fuel Rails, and Fuel Crossover Line.
Check Stock

A-Team Performance - EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short - Compatible with GM Chevrolet LS3 L92 SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Silver

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

A-Team Performance - EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short - Compatible with GM Chevrolet LS3 L92 SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Black

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short Black.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA) Rectangle Port Intake only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

DNA Motoring GKT-A-2-DP-DNT-GPT-KIT Graphite Aluminum Gasket Plus Donut Studs Bolts Kit,Metallic

  • 1-3/4” and 1-7/8” tubing diameters available for increased exhaust flow increasing performance and improved throttle response.
  • CNC Mandrel-bent tubes provide consistent tubing diameters for smooth flow and increases the cylinder scavenging effect.
  • Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • Note: Headers are not equal length, due to the LS cylinder heads being offset approx 1 /2" from the factory Note: Headers do not utilize the factory....
  • Fitment:Ls Turbo Manifold Fits LS1, LS2, LS3, LS4, LS6, LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L V8 engines 1997-2014.
Check Stock

POSENG LS LS1 LS2 LS6 Intake Manifold with 102mm Throttle Body Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Corvette Chevy SSR Cadillac CTS Pontiac GTO Firebird Saab 9-7X

  • 1.APPLICATION: For Cathedral Port LS1/LS2/LS6 Heads (for LS 4 bolt intake with cable drive only, not for drive by wire).For Specific Model Compatibility, please check the model list in the description.
  • 2.COMPATIBLE WITH: 1997-2004 Chevrolet Corvette.
  • 1998-2002 Pontiac Firebird Formula, Trans AM.
  • 3.NOTE: This intake manifold works well with 102mm Throttle Body, it can also work with 92mm throttle body (May be loose)..
  • 4.ROBUST PERFORMANCE: Made of 3MM thickness T6061 Sheet Aluminum, stay stable as always..
  • 5.PACKAGE INCLUDES: Intake manifold without rear map sensor port, 92mm throttle body, throttle position sensor (tps), gaskets, hardware, fuel rails, fuel crossover line.Injector not included..
Check Stock

Turbo Kit T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0 99+

  • Chevy Silverado / GMC Sierra LS Single T4 6466 Turbo Kit.
  • Hi Flow T4 cast passenger and oversized cast driver side manifold.
  • T4 T70 Trim Turbocharger Cast Passenger T4 Manifold Cast Driver High Flow Manifold Stainless Steel Crossover Stainless Steel 3" Downpipe w/ turndown....
Check Stock

LS3 MAP Sensor Compatible for 2010-2013 Chevy Camaro SS Convertible 2008-2013 Corvette C6 6.2L V8 VIN: W 55573248 213-4681

  • LS3 MAP Manifold Absolute Pressure Sensor LS (1 Bar).
  • Replaces Part Number: 55573248, 213-4681, 0261230282, 0261230146, 12591290.
  • Located on the inatke port near the throttle body..
  • Compatible with LS3 Camaro SS 2010-2013, LS3 Corvette 2008-2013.
Check Stock

A-Team Performance - Fabricated Intake Manifold w/Drive By Wire 102mm EFI Throttle Body - Compatible with LS LSX LS1 LS2 LS6 Black

  • 102mm Black Intake Manifold with EFI Drive by Wire 0° Opening Throttle Body Complete with Gaskets, Hardware, Black Fuel Rails, & Fuel Crossover Line.
  • Compatible with Chevrolet Small Block V8 GEN. III/IV (LS-Based) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2).
  • Compatible With Cathedral Port LS LSX LS1 LS2 LS6 heads.
  • Hardware - 3mm (1/8") thick T6061 Sheet Aluminum construction.
  • Durability - The intake will not bend or flex With Boost Or Vacuum.
Check Stock

Motion Raceworks Vacuum Boost Reference Billet Aluminum Distribution Block

  • This billet aluminum vacuum/boost reference billet distribution block is made to simplify and clean up plumbing lines for boost and vacuum purposes on your boosted LS engine..
  • The design allows the block to be mounted universally or off the upper two most holes on LS1 cylinder heads front or rear as well as on a firewall, or anywhere else. This manifold is CNC machined from 6061 aluminum and features 8 separate 1/8 NPT ports and 2 1/4" NPT ports (on each end) giving you many different options for line routing and enough spaces for all of your boost reference signals.
  • This works great for plumbing to your boost reference fuel pressure regulator, manifold pressure wastegates, blow off valve, map sensor, boost controller sensor and many other items. Comes with two stainless button head bolts with the correct length and thread to mount block to cylinder heads..
  • Comes complete with 4 1/8" port plugs and 1 1/4" port plug standard..
Check Stock

Kyostar 92mm Black Throttle Body GM Gen III Ls1 Ls2 Ls3 Ls6 Ls7 Sx Ls 4 CNC Bolt Cable

  • Fit Engine: LS Style 4 bolt Intake Manifold (eg LS2, LS3, LS7, LSX) with cable drive only.
  • Vehicle Tested. Perfect Drop-In Fit. Note:If you have any question about our product,please contact us right away..
Check Stock