Top Low temperature Flow Meter Reviews

Extech AN100 CFM/CMM Mini Thermo-Anemometer

  • Large display of airflow or air velocity.
  • Simultaneous display of air flow or air velocity plus ambient temperature.
  • Easy to set area dimensions (cm2) are stored in the meter's internal memory for the next power on.
  • 3 percent velocity accuracy via low friction 2.83 Inch D (72mm) ball bearing vane wheel on 3.9 Feet (120cm) cable.
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

  • FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
  • TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
  • ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
  • ⑥ max temp of tested liquid: 158°F/70°C.
  • MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
  • NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
  • WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check Stock

DIGITEN Water Flow Control Meter LCD Display Controller+G1/2\ Water Hall Sensor Flow Meter Flowmeter Counter 1-30L/min+G1/2\ Solenoid Valve Normally Closed N/C+DC 12V Power Adapter

  • ★【Large LCD Screen & Monitor Flow Rate】: Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly..
  • ★【Quantitative Control & Alarm Function】: The controller will turn off the solenoid valve automatically when flow reach to the setting value you desire, it's easy to install and control. It can automatically stop water filling into your concrete mixer. When the total amount reaches the setting value, the controller will alarm..
  • ★【Work with All Hall Effect Flow Sensor】: It can work with various different flow sensors through adjust the K value. High quality, come with temperature sensor, it can measure liquid temperature..
  • ★【Wide Applications】: Swimming pool, water dispenser, coffee machine, drip irrigation system, beer brewing, etc. For example, if you want 5 liters of water, you can set up 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller will control the solenoid valve to close it, the water flow automatically stops, and you just get 5 liters of water. Please select a suitable flow meter. An oil flow meter is required for liqu....
Check Stock

BTMETER Digital Anemometer Barometer Handheld, for Wind Speed Temperature Wind Chill Tester w/Humidity, Altitude, Barometric Pressure Meter for Climbing Drone HVAC CFM BT-100WM

  • ... Point, Barometric Pressure and Altitude. With data log, Tripod hole for mounting, it’s ideal for outdoor activities:Long Range shooting, Hunting, Sailing, Kite flying, Drone Driving, CFM air flow test..
  • ➤【HIGH PRECISION】Digital wind meter for measure wind speed range 0.67 ~ 67.1 mph( +/- 5% accuracy).
  • Wind temperature range -10~45℃,14℉-113℉(+/-2 ℃/℉).
  • Wind meter measurement altitude from 0-19685 Ft. Resolution: 0.2 mph, 0.2℉,0.1% RH. So you can be rest assured to get fast and accurate reading..
  • ➤【EASY TO USE】Measures different readings such as Max, Min, Average, Current Wind Speed, display in 5 units: mph, ft/min, km/h, m/s or knots. Temperature (Celsius/Fahrenheit), Elevation(M, Ft), Atmospheric pressure(inHg, hpa mbar). And LCD backlit screen makes it easy to read in day or at night..
  • ➤【LOG THE BAROMETER DATA】This handheld wind speed meter can also log 16 groups of barometric pressure data for record, compare and analyse the relationship between temperature, humidity, and height. It’s compact pocket sized Pro anemometer for weather station, long distance shooting, HVAC testing.
  • ➤【SAVE YOUR BATTERY】Auto shutdown after 10 mins without operation, low battery indicator to remind you change the battery. 1 year warran....
Check Stock

Testo 550i Kit I App Operated Digital Manifold and 2 x 115i Pipe Clamp Thermometer for air Conditioning, Refrigeration Systems and Heat Pumps – with Bluetooth

  • Dependable: The testo 550i with its rugged housing (IP54) block was specifically created for harsh environments, offering the reliability needed by HVACR technicians.
  • User-friendly: With its compact design, 2-way valve block and automated probe connection, the HVAC meter provides convenient handling in difficult to access environments.
  • Smart App: Take advantage of clearly visualized documentation from a smartphone or tablet. Remotely operate service and maintenance tasks and send results directly from the job site.
  • Efficient: The app-controlled air conditioning meter accurately determines high and low pressure as well as evaporation and condensation temperature.
  • Includes 115i: With a grip of up to 1.5”, the wireless pipe clamp thermometer provides quick and convenient temperature and flow and return temperature measurements of pipes.
Check Stock

Wendry Computer Water Cooling Thermometer, Water Flow Meter, Computer Temperature Detector Kit, PC Computer 3 Way Flow Meter Digital Thermometer Suitable for Water Cooling System Kit

  • A kit for PC water cooling system, consists of a digital thermometer, a water flow meter, connectors and clamps..
  • 3 way water flow meter helps you to monitor the speed and working states of the water flow..
  • A precise digital thermometer monitors temperature of the PC water cool system in real-time..
  • 4 pin power supply interface, easy to install..
  • High-quality and durable, work well in -50℃~110℃ temperature..
Check Stock

ASICS Men s Court FF Novak Tennis Shoes 15 White/Kale

  • Efficient: The testo smart probe set offers precise measurements and calculations for heating and cooling systems, making it ideal for all HVAC/R....
  • Testo 605i: The thermohygrometer is equipped with a bendable probe head and thus achieves remote temperature measurements in rooms, ducts, crawl....
  • Testo 115i: With a grip of up to 1.5”, the wireless thermometer provides quick and reliable temperature and flow and return temperature measurements....
  • Testo 549i: The pressure meter enables accurate readings for high and low pressure. The 45-degree connector simplifies servicing and troubleshooting....
  • Smart App: The free testo Smart Probes App is a powerful tool that allows you to remotely read and log measurements and create custom reports which....
Check Stock

HITNRUN Phase One

  • Efficient: The testo smart probe set offers precise measurements and calculations for heating and cooling systems, making it ideal for all HVAC/R contractors and technicians.
  • Complete Set: Includes two testo 115i pipe-clamp thermometers and two testo 549i high pressure gauges, as well as a protective hard-shell case with precise-fit compartments.
  • Testo 115i: With a grip of up to 1.5”, the wireless thermometer provides quick and reliable temperature and flow and return temperature measurements in pipes.
  • Testo 549i: The pressure meter enables accurate readings for high and low pressure. The 45-degree connector simplifies servicing and troubleshooting – without the need for hoses.
  • Smart App: The free testo Smart Probes App is a powerful tool that allows you to remotely read and log measurements and create custom reports which can be saved and shared.
Check Stock

10Pcs Car Temperature Gauge Kit-Coolant Temperature Gauge - Digital Temperature Gauge 2inch 52mm Universal Car Truck LED Water Meter Instrument Tool

  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - 12v car water temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy and durable.ABS has excellent complete physical and mechanical properties and good low temperature impact proof. Dimensional stability. Electrical properties, wear proof, chemical proof, dyeing, finished product processing and mechanical processing are better. - car temperature gauge kit.
  • ❃Easy to read in the dark: The blue light on the dial makes it easy to read in the dark. Its measurement range is 40-120 degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant temp gauge.
  • ❃Principle: The water temperature sensor is a thermistor sensor. Screwed to the engine cooling water channel. The thermistor determines the amount of current flowing through the coil of the water temperature gauge. To guide the meter hands - coolant temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy an....
Check Stock

Protmex PT6508 Temperature Humidity Meter Thermometer Hygrometer with Ambient,Dew Point, Wet Bulb for Indoor and Outdoor, Min/Max Hold, LCD Backlight

  • PT6508 Temperature meter is a new type of digital temperature and humidity meter, which designed to combine the functions of humidity meter, temperature meter, wet bulb temperature and dew point temperature. And Dew point is a measure of how much water vapor actually in the air..
  • Dual Display Humidity and Temperature with Accurate Measuring: Humidity range: 0% - 100%RH. Temperature range: -20℃(-4℉) - 60℃(140℉). Dew point Temperature :-50℃(-58℉) - 60℃(140℉). Wet Bulb Temperature:-20℃(-4℉) - 60℃(140℉)..
  • Digital humidity and temperature meter used for a high range of applications-HVAC,industry,agriculture,meteorology,medical,daily life,building engineer,paranormal investigator,in wine cellar ,machine room and data storeroom.
  • Multiple Function: With data retention, data storage, unit conversion, backlight, low battery indicator, automatic shutdown, maximum and minimum functions..
  • LCD display with backlight with high accuracy sensor, LCD brighter in the darker places. Auto shutdown without operation after 30 minute..
Check Stock

BTMETER BT-846A Pro HVAC Anemometer Measures Wind Speed Wind Flow Wind Temperature CFM Air Flow Velocity Meter with Backlight MAX MIN AVG

  • ➤【Pro Air Flow CFM Anemometer 】Accurately measures wind velocity in 5 units: m/s, km/h, ft/min, knots, mph. wind temp in ℃/℉ , air flow in....
  • ➤【Higher Range Wind Speed Meter 】Higher Wind Speed Range: 0.001~100 mph (Accuracy: +/- 3% +/- 0.2 reading), Resolution: 0.001. Air temperature....
  • ➤【Airflow CFM Meter】BT-846A wind speed gauge measures Wind flow range: CFM 0-999900 ft3/min, Resolution: 0.001-100, Air flow area : 0.001-9999....
  • ➤【Separated Extendable Wind Sensor】Built with user-friendly extendable wind sensor vane, so you can still look at the readings easily while you....
  • ➤【Must Have for Air Balancing】 Designed for HVAC trouble-shooting, air flow balancing. The separated wind speed sensor can be replaced if it’s....
Check Stock

3D Pen Projects for Beginners: 4D An Augmented Reading Experience (Junior Makers 4D)

  • ...skin, light violet, brown, dark blue, purple, red, black, white, yellow, pink) + (4 transparent: violet, red, lemon, transparent) + (4 Fluorescent: Yellow, Red, Blue, Green)..
  • 【Premium Quality Material 】: Made from high-quality upgraded material with consistent round diameter for smooth flow through the nozzle. Temperature setting of 190℃-210℃, quickly formed without breakage or bubbling, and does not block the discharge port. The high layer adherence is easier for you to draw your 3D artistic masterpiece, kids love to have fun with crafting & drawing..
  • 【 Quantity with Quality & Safe for Kids】: Our 3D Pen Refills provide the best value for money on the market, with the option to choose from 5m or 10m lengths. Our 10-meter filament comes in total length of 240 meter (~790 feet). 3D pen filaments Ataraxia Art PLA material is non-toxic, environmentally friendly, and has more vibrant colors, no bubbles, fast molding which makes them an excellent choice as a gift for kids who loves creativity..
  • 【 3D Pens PLA Safe for Teenagers】: Our PLA filament refills are made from organic raw material imported from the US, tested to ensure it is non-toxic and non-irritating, Stronger and harder to break. The melt temperature of PLA is only 60 °C, elimina....
Check Stock