Top Low emittance Adhesive Reviews

Chanzon 10pcs TIP120 TO-220 NPN Darlington Transistor 5A

High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
Monolithic Construction with Built-In Base-Emitter Shunt Resistors.
Collector-emitter saturation voltage - VCE (sat) = 2 V (maximum) at IC = 3 A.
Low collector-emitter saturation voltage.

Check Stock

TNP IR Emitter Extender Extension Cable (10 Feet) - Quad 4 Head 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One

Passes IR communication: Used with an IR Repeater kit to control a device.
Extend remote control ability to any room in the house.
Adhesive backing allows the emitter to be attached to the IR eye of a device.
Quad Heads allow you to control multiple pieces of equipment with only one IR output.
For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.

Check Stock

IR Emitter Extender Remote Control Transmitter 3.5mm to IR Extension Cable Triple Head Infrared Red Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One (3 Head, 10FT)

Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
Passes IR communication: Used with an IR Repeater kit to control a device.
Extend remote control ability to any room in the house.
Two emitters on a single plug,Adhesive backing allows the emitter to be attached to the IR eye of a device.
Dual Heads allow you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.

Check Stock

NTE Electronics MJ10012 Silicon NPN Power Darlington Transistor, 400V, 10 Amp

High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 60 Vdc (Min) TIP120, TIP125.
Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
Monolithic Construction with Built-In Base-Emitter Shunt Resistors.

Check Stock

IR Extender Infrared Remote Control Repeater Emitter Stick-On Mini Receiver Transmitter IR Blaster Extension Cable for TV/DVD/DVR/CD Player/Bluray Player (Single Heads, 10FT Long)

Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal. NOTE: Your device must have 'IR' port so the product could work!.
Passes IR communication: Used with an IR Repeater kit to remote control a device, extending remote control ability to any room in the house. NOTE: Your device must have 'IR' port so the product could work!.
Two emitters on a single plug, adhesive backing allows the emitter to be easily attached to the IR eye of your device..
Multiple heads optional allows you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
The mini stick-on infrared emitter includes a 10 ft cable between the emitter heads and the mini-plug, easily meet your expectation of extending..

Check Stock

TiVo 2 Head IR Emitter / Blaster

Polarity: Anode (Longer Part) | Cathode (Shorter Part).
Package Content: 50pcs x Infrared Emitter Diode.
Low heat, energy saving, low power consumption, long service life..
NOTE: IR Emitter ONLY, IR Reciever is NOT included..

Check Stock

OBVIS IR Infrared Emitter Extender Cable Extension (10 Feet 3Meter) Single HeadEye 3.5mm

IR emitter extension cable with single eye that is compatible with devices in 38khz(IMPORTANT).
Plug into IR OUT port for use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
Comes with adhesive backing sticks directly onto different devices.
Overall length of Infrared Emitter Extender: 10 feet (3 meter).
Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and other devices.

Check Stock

Bridgold 20pcs TIP127 PNP BJT Transistors Darlington Bipolar Power Transistor 5A -100v 3Pins

Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 100 Vdc (Min) TIP122, TIP127.
Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
Monolithic construction with built-in base-emitter shunt resistors.

Check Stock

Bridgold 10pcs TIP102 102 Bipolar BJT Single NPN Darlington Transistor 100 V/8 A,3-Pin TO-220

High DC Current Gain − hFE = 2500 (Typ) @ IC = 4.0 Adc.
Collector−Emitter Sustaining Voltage − @ 30 mAdc VCEO(sus) = 100 Vdc (Min) − TIP102, TIP107.
Monolithic Construction with Built−in Base−Emitter Shunt Resistors.
Low Collector−Emitter Saturation Voltage − VCE(sat) = 2.0 Vdc (Max) @ IC = 3.0 Adc = 2.5 Vdc (Max) @ IC = 8.0 Adc.
We have undergone rigorous testing and stable performance.

Check Stock

Gone in 60 Seconds

➤Works with all 38-56kHz IR remote control and devices with an IR input port..
➤Low current drive, low power consumption, long launch distance, small size installed..
➤Applied to infrared forwarding equipment, audio and video transmission equipment, IR remote wireless transceiver, centralized control equipment, etc..
➤Please note that the infrared emitter head is glued to the side of the infrared receiver tube, do not cover it, otherwise the device will not be used, and it will be insensitive to remote control by remote control ..

Check Stock

Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black

Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).

Check Stock

BOJACK LED Infrared Emitter and IR Receiver Diode, LEDs Infrared Emission and Receiver Tube for Arduino （Pack of 10 Pairs）

Polarity: Anode (Longer Part) | Cathode (Shorter Part).
Package Content: 50pcs x Infrared Emitter Diode.
Low heat, energy saving, low power consumption, long service life..
NOTE: IR Emitter ONLY, IR Reciever is NOT included..

Check Stock

uxcell 40pcs 3mm 940nm Infrared Emitter Diode DC 1.2V LED IR Emitter Light Emitting Diodes Clear Round Head

Polarity: Anode (Longer Part) | Cathode (Shorter Part).
Package Content: 40pcs x Infrared Emitter Diode.
Low heat, energy saving, low power consumption, long service life..
NOTE: IR Emitter ONLY, IR Reciever is NOT included..

Check Stock