Top Low Temp Aluminum Welding Rod Reviews

Baluue TIG Welding Tungsten Electrodes Ground Finish Welding Rods Thoriated Electrodes for WP

  • lanthanated tungsten rods Multiple choices for your high-quality welding..
  • lanthanated electrode Pure Tungsten forms a clean, balled tip when heated and provide great arc stability for AC welding with a balanced wave..
  • Welding Tungsten Electrode Rod Good mechanical cutting performance, good electrical conductivity, easy operation and long service life..
  • tig tungsten Smallest electron emission, low steam pressure, low resistance and good electrical conductivity..
  • ground annealed Tungsten electrodes Pure tungsten welding electrodes also provide good arc stability for AC sine wave welding, especially on aluminum and magnesium..
Check Stock

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

  • MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....
Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

Low Temp Aluminum-Zinc Brazing Rod 10/20/50Pcs 500mm x 2mm 3.5g Tube General Purpose Aluminum TIG Welding Rod No Need Solder Powder

  • 【Great Welding Effect】With full & smooth welding effect because of internal powder. With low melting point(647°~658°), great weldability and....
  • 【No Need Solder Powder】You don't have to use other flux powder with aluminum alloy as the welding core and coating as the salt base. Very....
  • 【Widely Use In Life】Suitable for welding or surfacing welding alloy with high strength, good forgeability & good corrosion resistance..
  • 【Very Wide Application】It is mainly used for argon arc welding and filling material for pure aluminum, connection with aluminum bus and guide rod....
  • 【Light Weight & Small Volume】 Size of 500 x 2mm & weight of 3.5g, very easy to bend & carry. Delivery: Ship From US, It Takes About One Week..
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 9 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5500mAh for DIY Battery

  • ...peration more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
  • 【Intelligent and Safe】This upgraded mini spot welder has over-current protection, low and over voltage protection, and over-temperature protection. Intelligent output current. We offer 3 months free return and lifetime warranty for our spot welder..
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 30 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5500mAh for DIY Battery

  • ...peration more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
  • 【Intelligent and Safe】This upgraded mini spot welder has over-current protection, low and over voltage protection, and over-temperature protection. Intelligent output current. We offer 3 months free return and lifetime warranty for our spot welder..
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 30 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5000mAh for DIY Battery

  • ...peration more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
  • 【High Speed Battery】 After being fully charged, thousands of points can be continuously welded on a 0.1-0.15mm nickel sheet. With its own charging management control module, you can use the power bank to charge the spot welder..
  • 【Intelligent and Safe】This upgraded mini spot welder has over-current protection, low and over voltage protection, and over-temperature protection. Intelligent output current. We offer 3 months free return and lifetime warranty for our spot welder..
Check Stock

20Pcs Copper Welding Rod Selffluxing Brazing Round Welding Rod Low Temperature Welding Consumables for Air Conditioner Refrigerators

  • Package Include: The package includes 20pcs welding rods, which is convenient to replace. Such economical and practical welding rod kit is commonly....
  • Good Fluidity & Easily Use: Standard processing with 2mm diameter, the low temperature phosphor copper welding rod is easy to install and remove. Good....
  • Extensive Applications: Our round welding rod is suitable for electromechanical instrument industry. And it is mainly used for refrigerator copper....
  • Stable Working Performance: This round phosphor copper welding rod adopt phosphor copper material, has stable working performance and is widely used....
  • Regulatory Compliance: This welder rod is entitled with high performance according to strict rule. The rod is designed and manufactured according to....
Check Stock

Forney 30810 Welding Rod, 1/8-Inch

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
Check Stock

Forney 30701 E7018 Welding Rod, 3/32-Inch, 1-Pound

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
Check Stock

Welding Skills

  • Weldpro’s flagship 200 amp multi function MIG welder with LCD display. Now with exciting new added features and easy access menus offers amazing....
  • The model 210 LCD is also capable of true lift TIG welding as well as stick welding and aluminum welding with the optional spool gun. The MIG 210LCD....
  • MIG, Stick or Lift TIG welding all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A.
  • Added new features include in MIG Mode, Run-In, Spot Weld, Gas Choice, Synergic or Full Manual controls, on screen polarity swapping for Flux Core vs....
  • Color LCD display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with indication.....
Check Stock

10 MIG Spool gun fits Miller Millermatic 141/190/211 Multimatic 200/215/220 Aluminum welding

  • Weldpro's flagship 200 amp MIG welder that goes beyond MIG and Flux Core welding! AND 3 YEAR WARRANTY!.
  • The model 200 is also capable of true lift TIG welding (without foot pedal) as well as stick welding and aluminum welding with the optional spool gun.....
  • MIG,Stick or TIG weld all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A.
  • MIG welding wire diameter: .023 .030 .035, welding thickness: 19ga- 0.197 in.
  • TIG tungsten needle diameter: 0.063 0.094, welding thickness: 25ga- 1/4....
  • Dual digital display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with....
Check Stock

100 Pieces Flux Core Aluminum Rods Low Temperature Easy Melt Aluminum Welding Rods Welding Sticks

  • NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to....
  • HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
  • PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high....
  • WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and....
  • AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..
Check Stock