Top Low Profile Screws Reviews

Warne M902/879M Two Piece Bases Weatherby Mark V Matte

Low profile design allows use of iron sights when optics are removed.
Full width and depth recoil slots provide maximum bearing surface for recoil key engagement.
Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque is recommended.

Check Stock

Prime Ave Stainless Steel License Plate Screws Compatible/Replacement for Buick Cadillac Chevrolet GMC (Pack of 8)

Includes (8) brand new stainless steel license plate screws- Lifetime Warranty to Never Rust!.
Premium quality 18-8 stainless steel for maximum performance & durability.
Low profile screws to enhance the look of your vehicle.
Truss head screws to secure your license plate without washers (screws are long enough & can be used with license plate frame).
Screws are self-tapping for perfect fitment for installing front & rear license plate.

Check Stock

3M SJ4575/BLK110 Scotch SJ4575 Dual Lock Low Profile Reclosable Fastener: 1" x 10 ft, Black

3M Scotch SJ4575 Dual Lock Low Profile Reclosable Fasteners can replace conventional fasteners such as screws, clips, rivets, snaps, hook and loop and bolts in many applications where access or repositioning is needed..
Amazingly thin and reclosable, yet strong, 3M Dual Lock Low Profile fasteners are thinner and more flexible than other reclosable fasteners. SJ4575 is backed with 3M 300 LSE Laminating adhesive, giving it an excellent bond to many substrates including polypropylene, polyethylene, metal, finished wood and many others..
Used in POP (point of purchase), trade show exhibition and electronics, Dual Lock low profile reclosable fasteners attach ceiling tiles, carpet, seat cushions, trade show graphics, access panels, wall panels, and small electronic devices. They are also great for attaching E-ZPass tags to car windshields. 3M typically recommends 4 square inches of fastener per pound of static load for their low profile dual lock products..
unlike products where there are a separate hook and a loop side.
so rolls are typically cut in half and then mated or connected so a 10-foot roll would be used as two 5-foot strips. Low profile dual lock has about 700 stems per square inch, but the stems ar....

Check Stock

Monstrum Lockdown Series Picatinny/Weaver Scope Rings | 30 mm Diameter | Black | Medium Profile

Sturdy 30 mm diameter scope rings for use with standard 30 mm scope tubes.
Base is compatible with all Picatinny and Weaver mounting platforms.
Torx locking screw system allows for quick yet powerful tightening while protecting from the screws from stripping.
The rings are available in three heights - low profile (15mm of clearance), medium profile (18mm of clearance), and high profile (22mm of clearance).
All Monstrum Tactical Lockdown Series rings and mounts include a lifetime guarantee.

Check Stock

Jnrtifow Low Profile Picatinny Weaver Top Rail Scope Mount Base for Optics Scope Sight Adapter

Customizable fine level adjustment for perfect zero (up/down, left/right)..
Rear Sight Rail Mount 100mm Picatinny Weaver 20mm Scope Mount Base For Hunting Red Dot Optics..
Ultra light weight and low profile scope mount..
Feature: Fast and easy installation. Mount on standard 20mm weaver base -Constructed of Aluminum..
Specification：Hardcoat anodized 6061 aircraft aluminum. Recommended for use with low profile red dot.Integrated back-up rear sight. 3X M3 countersunk hex screws. 1X M3 round head screw..

Check Stock

UTG Super Slim RMR Mount 2 in 1 Combo Picatinny

Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum with Weight Reducing Lightening Cuts, and Finished in a Matte Black Anodize.
0.87" Height Mount Positions RMR at the Correct Height for an Absolute Co-witness in line with Standard Height AR Iron Sights.
Low Profile 0.40" Height Mount Positions RMR at a Low Enough Height for Most Shotguns and Rifles with Traditional Stocks Not in Line with the Bore.
Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stops for a Secure Zero Hold on Any Picatinny Rail.
Includes RMR Mounting Screws and Installation Tools for a Simple and Friendly Installation.

Check Stock

20pcs M8 x 25mm 304 Stainless Steel Flat Head Torx Bolt Flat Head Cap Bolt Torx Socket Countersunk Screws.

Material：The flat head socket cap screws are make stainless steel 304 which offers a high level of chemical and corrosion resistance..
Package Included: 20 x Flat Head Socket Cap Screws..
Use：With a low-profile, countersunk head, flat socket head cap screws are ideal for applications requiring a strong fastener with a flush mount..

Check Stock

Amazing Drapery Hardware Wand Assembly Kits Repair for Broken Horizontal Blind Tilt Wand 5

Package: A set of Low Profile Brackets For Window Blinds(two brackets as a set,a Left bracket and a right one not include any screws).
The size of Windows Box Brackets is 1-1/2" Tall x2-1/4" Wide for 2" Low Profile blinds only..
White Color Bracket set Can mount to top, side, and back of window casing..
The Brackets made of Strong Steel Hinged Safety,Good for Inside or Outside mounted blinds.
Please kindly check the size on the picture and make sure it can match your device before order..

Check Stock

3M SJ4570/CLR1333 Scotch SJ4570 Dual Lock Low Profile Reclosable Fastener: 1" x 10 ft, Clear

3M Scotch SJ4570 Dual Lock Low Profile Reclosable Fasteners can replace conventional fasteners such as screws, clips, rivets, snaps, hook and loop and bolts in many applications where access or repositioning is needed. Amazingly thin and reclosable, yet strong, 3M Dual Lock Low Profile fasteners are thinner and more flexible than other reclosable fasteners..
SJ4570 is backed with 3M 300 LSE Laminating adhesive, giving it an excellent bond to many substrates including polypropylene, polyethylene, metal, finished wood and many others. Used in POP (point of purchase), trade show exhibition and electronics, Dual Lock low profile reclosable fasteners attach ceiling tiles, carpet, seat cushions, trade show graphics, access panels, wall panels, and small electronic devices..
They are also great for attaching E-ZPass tags to car windshields. 3M typically recommends 4 square inches of fastener per pound of static load for their low profile dual lock products. The 10-foot sizes are cut from longer source rolls (only the 5/8 inch x 10-foot size of SJ4570 which is specifically labeled as *retail-packaged comes in a package suitable for resale)..
unlike products where there are a separate hook and a loop side.

Check Stock

kemimoto UTV Side Mirrors, UTV Mirrors for 1.6

Easy Installation Without Rubber PadsThe anti-slip teeth Clamp design makes utv mirrors be installed without rubber pads, just simply tightened the screws.Sturdy and no vibration..
Break Away FeatureCombines maximum adjustability and a "break away" angle, ideal for outdoor adventure, allow the rzr mirrors to fold in, without causing damage..
3 Adjustment Methodskemimoto utv side mirrors have 3 adjustable places allow you mount the pioneer side mirrors high/low and forward/back for desired visual angel..
Small Convex MirrorThe small convex mirror maximize your view with wide angle in the UTV. Helps you to forecast the next surroundings when passing, changing lanes or parking and to keep you in control of your environment..
Low Profile C ClampsSpecial low profile C clamps design allows you to install the side by side mirrors with windshield. UTV side view mirrors for 1.6"-2" Roll Bar,compatible with Polaris RZR(except 170), Pioneer, Can Am Maverick X3, Kawasaki Teryx,etc..

Check Stock

Wooden Camera Vertical Camera Bracket, L-Shaped with 1/4-20 and 3/8-16 Threaded Holes, Made of Durable CNC Machined Aluminum, for Heavy Camera Setups

Vertical L-Shaped Camera Bracket: Attaches to tripod plates, camera bodies and ARRI dovetails in a vertical position. This bracket can accommodate even the heaviest camera packages.
Horizontal and Vertical Plates: This camera bracket has 1/4-20 and 3/8-16 threaded mounting holes plus pass-through slots for cabling on both the horizontal and vertical plates.
Durable Aluminum: Made of durable, CNC machined aluminum. This ultra-durable material guarantees the super steady and firm position of your device when attached to the bracket.
Mount Heavy-Duty Camera Gear: Use this L-shaped Vertical Camera Bracket to mount your heavy-duty camera gear. For smaller camera setups, consider the Mini Vertical Camera Bracket.
Includes: 2 x 1/4"-20 low-profile screws and 2 x 3/8"-16 low-profile screws. Weight 1960g (4.11 lbs), Dimensions 247.7 x 247.8 x 247.7 mm (9.75 x 6 x 9.75 in).

Check Stock

Kyosho 1/10 Fazer 4 Wheel Drive Mk2 Challenger SRT Hellcat B5 Brushed RTR Blue KYO34415T2 Cars Elec RTR 1/10 On-Road

“Ultra Scale Body” replicates the fine details of the actual body of the car..
Simple low center of gravity upper deckless chassis design features an electronic speed controller and receiver cover as well as a one-piece gearbox....
Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head....
Original low-profile semi-slick pattern tires produce superior performance..
Comes with the new powerful 550 size 14T brushed motor(G14L)..

Check Stock

Xcluder 48" Low-Profile Door Sweep, Dark Bronze – Seals Out Rodents & Pests, Enhanced Weather Sealing, Easy to Install; Door Seal Rodent Guard; Rodent Proof

INDUSTRY-LEADING PROTECTION: Xcluder Low-Profile 48-inch Rodent Proof Door Sweeps provides industry-leading rodent prevention and peace of mind in a small, discreet frame..
GUARANTEED TO STOP MICE AND RATS: The rodent proof industrial rubber door threshold seal, filled with poly fibers and steel wool, creates an impenetrable barrier for mice and rats..
ENHANCED WEATHER SEALING: The Xcluder Low-Profile Door Sweep also doubles as a weather seal when used as an exterior door sweep. It provides draft protection, prevents light penetration, and more..
SPECIFICATIONS: The Low-Profile Door Sweep seals gaps up to 1-inch, has a height of 1 9/16 inches, and is 48 inches long..
EASY INSTALLATION: This pest and rodent door sweep can be cut to size using common tools and features 1/4-inch vertical adjustability, easy install screw-on end caps, and self-drilling 1-inch mounting screws..

Check Stock