Top Low Profile Car Jack 2 Reviews

BILT Hard Aluminum and Steel Floor Jack, Low Profile Hydraulic Racing Floor Jack with Dual Piston Rapid Pump, 1.5 Ton Capacity (3,000 lb) , Blue

  • ...ndustrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant..
  • Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground..
  • Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it..
  • Rapid Pump: The high performance low profile car jack has a exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It also has a universal joint release mechanism for controlled descents of your load from any handle position..
Check Stock

VEVOR Floor Jack, 3 Ton Low Profile Floor Jack, Heavy-Duty Steel Racing Floor Jack with Single Piston Quick Lift Pump, Floor Jack Lifting Range 5.12"-20"

  • ...Needs: Min. Height: 5.12"/130 mm. Max. Height: 20"/508 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a single piston quick hydraulic pump allows you to pump the jack to the desired height easily..
  • Rigid Steel Construction: Boasts heavy-strength steel construction, our low-profile jack is durable and sturdy to use. It is equipped with steel wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll..
  • Secure and Carefree: A rubber saddle and a foam handle bumper provide maximum protection to your vehicle! The 360° rotatable saddle can be detached and replaced. Thanks to the leverage principle, the 45 in/1145 mm long handle makes lifting easier. With the two-piece design, the handle can be disassembled when stored, taking up little storage space..
  • Meet International Certifications: Comply with CE certification (2006/42/EC (EN1494)), UKCA certification (SI 2008 NO.1597(BS EN1494)), and ASME PALD-2014 SAFETY STANDARD. Our jack features a built-in safety load system that prevents use beyond load capacity. The excellent sealing system ensures your security and long-term use..
Check Stock

Tomioka Racing Super Slopes - Low Profile Car Ramps Perfect for Lowered Cars, Raise Your Car Up for Floor Jacks

  • Compact design perfect for storing in your garage, both sit into each other.
  • Raises vehicle 3 inches off the ground to give access to floor jack points.
  • Perfect for lowered vehicles that are not tall enough to get a floor jack under.
  • Low Profile with a low slope incline that works well to save the front lip of your car.
  • Light Weight & Easy to Store giving you an easy tool to tuck away under your tool box.
Check Stock

K Tool International 2 Ton Extra Long Low Profile Service Jack (XD); Durable Steel Construction. Swivel Rear casters, Overload Protection, Low Profile; KTI63105A

  • [LOW PROFILE] - This Service jack maintains a low Profile with lifting range 2-3/4" to 24".
  • [DURABLE] - Heavy-duty steel construction provides stability and endurance. Swivel rear casters provide smooth maneuvering and positioning.
  • [PROTECTION] - Built-in valve protects against jack over-loading.
  • [WARRANTY] - Covered by a 2 year warranty on material and workmanship.
Check Stock

JEGS 80077-2 Replacement Saddle Pad For JEGS Professional Low-Profile 3-Ton Alum

  • For JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack....
  • Sold Individually The JEGS 80077-2 saddle pad is a replacement for the JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack 555-80077. To prevent slippage this pad is made from flexible rubber with a dimpled surface. Situated in the center of the saddle, this piece also provides a padded surface to protective bodywork and....
Check Stock

JEGS 80077-1 Replacement Rear Caster For JEGS 3-Ton Aluminum Jack (555-80077)

  • Fits JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack (555-80077).
  • Sold Individually JEGS 80077-1 rear caster is just one of the replacement parts offered for our 555-80077 professional low-profile 3-ton aluminum floor jack. Easily installed, the castor will help keep your jack mobile and safe..
Check Stock

VEVOR Floor Jack 4 Ton Low Profile Floor Jack Heavy-Duty Steel Racing Floor Jack with Dual Pistons Quick Lift Pump Floor Jack Lifting Range 3.94 -20.98

  • ...Height: 3.94"/100 mm. Max. Height: 20.98"/533 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a dual parallel pump system allows you to lift to the highest in full 7 strokes. Speed up your process..
  • Rigid Steel Construction: Boasts heavy-strength steel construction, our low-profile jack is durable and sturdy to use. It is equipped with steel wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll. And the design of the magnetic tray on the top is convenient for you to place tools..
  • Secure and Carefree: A rubber saddle and a foam handle bumper provide maximum protection to your vehicle! The 360° rotatable saddle can be detached and replaced. Thanks to the leverage principle, the 52 in/1320 mm long handle makes lifting easier. With the two-piece design, the handle can be disassembled when stored, taking up little storage space..
  • Meet International Certifications: Comply with CE certification (2006/42/EC (EN1494)), UKCA certification (SI 2008 NO.1597(BS EN1494)), and ASME PALD-2014 SAFETY STANDARD. Our jack features a built-in safety load system that prevents use beyond load capacity. The excellent sealing system ensures your security and long-term use..
Check Stock

VEVOR Floor Jack, 3 Ton Low Profile Floor Jack, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, Floor Jack Lifting Range 3-6/11"-19-11/16"

  • .../90 mm. Max. Height: 19-11/16"/500 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a dual parallel pump system allows you to lift to the highest in full 7 strokes. Speed up your process..
  • Light But Sturdy: Boasts heavy-duty steel and durable aluminum construction, VEVOR low-profile floor jack is sturdy to use and light to carry. It is equipped with 4 wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll. And the design of the armrests on both sides is convenient for carrying and positioning..
  • Secure and Carefree: A rubber saddle and a foam handle bumper provide maximum protection to your vehicle! The 360° rotatable saddle can be detached and replaced. Thanks to the leverage principle, the 45" long handle makes lifting easier. With the two-piece design, the handle can be disassembled when stored, taking up little storage space..
  • Meet International Certifications: Comply with CE certification (2006/42/EC (EN1494, EN 12100)), UKCA certification (SI 2008 NO.1597(BS EN1494, BS EN 12100)), and ASME PALD-2014 STANDARD. Our jack features a built-in load system that avoids use beyond load capacity. And the excellent sealing system ensures your security and long-term use..
Check Stock

Magisale Low Profile Plastic Car Service Ramps 6 Ton Heavy Duty Truck Vehicle Ramps for Oil Changes& Maintenance- 4 Pack

  • [CAR RAMPS] Compared with most car ramp sets, Magisale low profile plastic car service ramps contain set of 4 pcs, for the easier way to change oil, repair and maintain your vehicles.
  • [8.3° INCLINATION & 2.6” High] 8.3° loading angle makes it easier and safer for low clearance vehicles. Lifting low profile cars for 2.6 inches higher, please confirm the height before purchase.
  • [SPECIAL DESIGN] Features honeycomb channels to prevent moisture build-up, making it easy to clean the car ramps. Curved top and bulged end prevent from driving crossed the end of car service ramps and stop the vehicles sliding down.
  • [HEAVY DUTY PLASTIC] Made of lightweight but high-impact and strengthened PP material. These low profile ramps are designed for durability. It’s safe and sturdy to easily accommodate cars or trucks for maintenance.
  • [MEASUREMENTS] Each car ramp size: 27.2" L x 7.9" W x 3”H.
  • Package size: 27.95" L x 8.26" W x 8.66" H.
Check Stock

3 Ton Aluminum Race Floor Jack Low Profile Rapid Pump Show Car 60 DAY WARRANTY

  • 3 Ton Aluminum Race Floor Jack Low Profile Rapid Pump Show Car 60 DAY WARRANTY#0017/3.
Check Stock

Vestil Portable Scissor Lift Table - 1,000-lb. Capacity, 58in. Raised Height, Model Number PST-1-58

  • Hydraulic jack having a low enough profile to raise forklifts and high enough profile to raise farm equipment, tractors and some earth moving equipment..
  • Two lift points for numerous lifting applications. Two position saddle at scissors end can be quickly rotated to handle either edges or flat surfaces of a load..
  • 2 1/4 inch low lift height at scissors end..
  • 43 inch removable "T" handle for ease of pumping and storage when not in use. The "T" handle makes transporting and maneuvering the jack very simple..
  • Provided faster rising action and eliminates the need to bend down to get the full pump stroke..
Check Stock

Jack Boss 3 ton Hydraulic Aluminum car Floor Jack,6600 lbs Capacity,Low Profile Lightweight Quick Lift Trolley Jack with Dual Piston

  • [Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle.
  • [Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle.
  • [Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle.
  • [Durable Material and Easy Operation]Floor jack constructed of aluminum billet and welded steel frame assures high strength and duablility. Steel casters and swivel front casters for easy maneuverability, sturdy handle for convinient carrying.
  • [Safety and After-sales]Our floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME PASE safety standards.Includes a limited 1 year manufacturer warranty.If you have any questions, please feel free to contact us,we will be the first time to solve for you.
Check Stock

Carwires MJ200C Premium Car Audio Cassette Adapter

  • Cassette to 3. 5mm stereo connection, Ideal for mobile devices.
  • Compatible with mobile devices that have a 3. 5mm audio output.
  • 3-foot audio cable with low profile gold-plated connector.
  • Adjustable design fits front and side load cassette players.
  • Provides a static free connection to play music through your car speakers.
  • Buy with Confidence: Backed by CARWIRES 1-year no-hassle warrantyDescriptionThe MJ200C universal car audio cassette adapter is simple way to transform your old car stereo cassette player. This cassette adapter will output stereo music from any portable device that has a 3.5mm headphone jack. Simply plug the 3.5mm connector into your mobile device and insert the cassette adapter and youll hear crystal clear stereo sound through all your car speakers. It even has an adjustable cable position to match the orientation of your cassette-slot. Time to push aside your old cassettes and start listening to some music from the 21st century!.
Check Stock