Top Low Profile Brake Lights Reviews

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

  • ... connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
  • NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
  • Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
  • Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
  • Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for use on trailers that may be submerged, esp.for a boat trailer. We truly test it under water for 24 hours and it is totally submersible.
Check Stock

QUASCO Smoked Led Motorcycle Brake Tail Light Rear Taillight Compatible with Harley Dyna Touring Softail Sportster

  • ... to increase safety. 3-in-1 design, function as tail light brake light and license brake light. Best Replacement for dull stock taillight.
  • Waterproof: Made of high quality ABS plastic, well-sealed on the edge, and come with thick foam gasket, effectively keep water out of housing, stay illuminated in rainy days. Low profile smoked lens gives your motorcycle a sleek look.
  • Easy Installation: Just splice wire into existing wire harness. 3-wire configuration, red wire for brake light, blue wire for running light / taillight and black wire for negative.
  • Package Including:1 Pcs smoked Led motorcycle tail light brake lights, worry-free 180 days manufacture warranty, and friendly customer service.
Check Stock

Partsam 2Pcs 4.4" Red 24 LED Trailer Clearance Marker Light, IP67 Waterproof Aluminum Housing Surface Mount Stop Brake Turn Tail Lights for Trailer Truck Tractor RV

  • Each marker light built-in 24pcs high power SMD LEDs, Output super bright red light, Outfitting your truck with this LEDs lights will allow other drivers to see you better at night.
  • LED trailer lights design with 3 wire, red wire is high brightness and function as brake/turn signal light, black wire is low brightness and function as tail light, white wire for ground.
  • Made of aluminum housing and high quality poly-carbonate lens, rustproof and durable, resistant to shock and vibration. IP67 Waterproof, don't worry about rainy and snow day.
  • Easy installation, Light weight and low-profile design, comes with gasket and mounting screws for surface mount.
  • LED trailer tail light acts as stop,turn,and tail signal lights when properly mounted.
  • suitable for trucks, trailers, tractors, MPVs, RV buses or other 12V vehicle.
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

MOVOTOR Tail Light Led Integrated Turn Signal Brake Running Light Low Profile Smoked Rear Light Compitable with Harley Sportster 883 1200 Dyna Road King Electra Glide

  • All in One: Newest tail light with running/ brake/ integrated turn signal lights, brighter than stock tail light with smoked lens, making driving more....
  • Application: Directly replace stock taillight, compitable with Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings, 1991-2010....
  • Style: High intensity led chips, Increased rear visibility, Easy to notice by others vehicles on road for safety driving. Lay Down Style,low profile....
  • Wire Diagram: 12V DC, Black Wire - Negative.
  • Package: 1 PCS Smoked LED Tail Light + 1 PCS Gasket + 12 Month Warranty and friendly customer service make your purchase absolutely risk-free. Any....
Check Stock

Pack of 2 Aluminum Housing Red LED Trailer Stop Brake Turn Tail Lights, AT-HAIHAN DOT Compliant Waterproof Surface Mount Lighting for Truck Tractor Jeep RV

  • waterproof LED trailer taillight acts as stop, turn, and tail signal lights when properly mounted.
  • suitable for trucks, trailers, tractors, MPVs, RV and buses.
  • Ultra slim, die-casting aluminum housing with durable red polycarbonate lens over red LEDs, resistant to shock and vibration.
  • built-in 12 PCS SMD LEDs, features premium optics to output super bright red light, high brightness for turn or brake light, low brightness for tail light, making them ideal for front or rear vehicle applications, improve visibility at night, in fog or raining day.
  • Low-profile design, comes with gasket and mounting screws for surface mount, can be stacked vertically or horizontally to improve visibility where required.
  • Support 12V DC input only with 3 wire design, red wire for turn signal or brake light, black wire for tail light, white wire for ground.
  • 24 months manufacture & seller warranty with 60 days money-back or replacement service.
Check Stock

Trailer Light Led, Boat Trailer Light Kit, IP68 Waterproof Led Trailer Lights, Combo Stop Turn Running Brake License Plate Lights for Trailers, Truck, Boat etc

  • Multifunction Trailer Lights: This combination trailer tail lights work as stop, turning, brake, tail, rear reflector, reflector and side marker light..
  • Submersible Rectangular Trailer Lights: With IP68 Waterproof rating, makes it ideal for the trailers submerged, like boat trailer..
  • Fully Compliant with DOT: Construct with super bright LED lights and 100% sealed circuit board to ensure high visibility, even inclement weather, provide safe driving..
  • Wire Tips: Left Side: White Wire: Ground.
  • White+Yellow: High Brightness, used as Brake Light.
  • White+Brown: Low Brightness, used as Running Light/Left License Plate Lamp.
  • White+Green, : High Brightness, used as Brake Light.
  • White+Brown: Low Brightness, used as Running Light..
  • Wide Application: The trailer lights are perfect for boat truck trailer under and over 80 inch width. Can be widely used on truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc..
Check Stock

MUENING 10 Pcs Motorcycle RGB LED Strip Lights, APP&RF Wireless Smart Controller Compatible with Carts Trikes Cruiser Scooter ATVs UTVs

  • 【MULTICOLORS & MULITMODES】 The RGB LED wheel ring lights offer more than 16 million colors to you to DIY different lighting scenarios. Including adjustable light pattern & speed, change lights follow the rhythm of your music or external voice..
  • 【SPECIAL FEATURE】 The wheel ring lights kit can be controlled by Bluetooth APP and remote at the same time. This makes it easier to operate and give you the most personalized experience..
  • 【HIGH PERFORMANCE】 IP68 Water-proof/ Dust-proof/ Rustproof/ Shockproof, effective against rain and snow and heavy fog weather, over 50000 hours above lifespan. The Cree LED chip more brighter, that the low profile LED light kits will boost your night time driving efficiency.They also can withstand high temperatures..
  • 【EASY FOR INSTALLATION】 PLUG & PLAY. The RGB LED Wheel Ring Lights can install directly to the hub assembly. NOTE: The widest part of both brake assemblies must be SMALLER than 13.5 inch..
  • 【PACKAGE INCLUDE & FITMENT】 4 x RGB Wheel Ring Lights, 1 x Remote, 1 x Control Box, 1 x Extension cord, 20 x Mounting Bracket. Install On Your Motorcycle, Truck, Car, 4x4, Atvs, Jeeps, Suvs, Mining Vehicles, Tractors Or Boat And Heavy Equipments..
Check Stock

NTHREEAUTO Smoked LED Rear Tail Light Motorcycle Taillights Brake Driving Compatible with Harley Dyna Road King Electra Glide Street Bob Touring

  • ... High intensity led chips, Increased rear visibility, Easy to notice by others vehicles on road for safety driving. Lifespan: above 30000 hours.
  • Wire for functions: Running--White Wire, Brake--Red Wire and Turn Signal: Yellow wire-- right turning.
  • Package: 1 Piece Low Profile Smoked Led Tail Light +1 piece Gasket, come with the gasket to prevent water infiltration. Warranty:12 months quality warranty make sure you get risk-free tail light.Any product installtion issues, feel free to contact MOVOTOR via amazon message center, Notes: Login your amazon account > choose "Your orders" > find the order ID > click "Contact seller..
Check Stock

NTHREEAUTO 4PCS Sequential LED Motorcycle Turn Signals Front Rear Mini Blinkers Brake Light Indicators Compatible with Honda Shadow Kawasaki Vulcan Yamaha Suzuki Bobber Cruiser Chopper

  • ...wasaki, Yamaha, Suzuki and other motorcycles. You are backed by 3-Month warranty since the order purchase date..
  • 【Brake & Turn Signal Combo Light Kit】Multifunction switchback & sequential mode, stylish, nice and attractive, add features to your motorcycle. Front: Outer flowing amber for signal, white for running lights, center red for brake light.
  • When the brake light is on, the outer white halo ring will on at same time. Rear: center amber for signal, outer red halo ring will turn off while turn signal is on..
  • 【4X Brighter Than Factory Light】NTHREEAUTO mini motorcycle blinkers, built in high power SMD led chips, energy saving is superior to traditional lights, with high brightness, low heat generation, lower power consumption, extended service life, greatly increased your visibility at night, foggy and rainy days or any extremely weather, providing the safety driving..
  • 【5X Longer Lifespan】Motorcycle turn signal lights processed with ultrasonic treatment housing and ABS Plastic bottom shell, impact resistance, heat and low temperature resistance, protect led chips from water or dirt damage without weakening light.
  • Flexible handle protects turn signal light from accidental collision damage..
  • 【Easy Installation】Easy wiring, bolt mounting.
Check Stock

LED Lighted Tailgate Emblem Compatible with Chevy Silverado 2014-18 Chrome

  • Officially licensed, LED-lighted Chevy tailgate lighted emblem for tailgate replaces your factory emblem to add a stylish touch to your vehicle.
  • Light-up insignia activates when running lights are on and brightens when brake pedal is pressed.
  • Low illumination while you’re using tail lights.
  • High illumination when you brake or turn on the hazard lights.
Check Stock

XTASY MOTORSPORTS PLUG AND PLAY INTEGRATED LED TAIL LIGHT BLACK SMOKE YAMAHA R7 YZF-R7 YEAR 2022

  • ...nses Plate Relocation Kit P/N 53702-04). Also fits '09-'13 FLHRC, and '09-later FLHTC, FLHTCU, FLHTK and FLTRU models..
  • 【ALL-IN-ONE Function】It can be used as tail lights, brake lights and license plate lights. Built in 6 Pcs led chips lit up good for license plate light. 39 Pcs LEDs are used for taillights, low profile design, curved high with rear fenders for a streamlined looking, make your motorcycle more distinctive..
  • 【2X Brighter Than Factory Light】Getting tired of dim or old light. It’s time to get the taillights. Built in high power led chips, 2x brighter than factory light, maximize your rear end visibility, greatly improve your driving safety at night or rainy days. Easy to install, no modification needed, just connect black wire from tail light to ground on your stock light, connect red wire to your brake light, and connect yellow wire to your license plate light..
  • 【High Quality Tail Light Kit】Made of high quality ABS plastic material, processed with ultrasonic treatment housing, protect led chips from water or dirt damage without weakening light.
  • water sealed, a foam included in package makes our taillight closely to your motorcycle, avoid water or moisture inside after driving in heavy rainy days or car wash. And led chips low....
Check Stock

TCS 3D Skull Bones Chrome Metal Motorcycle Bike License Plate Frame

  • Fits all standard motorcycle license plates (7" x 4").
  • Nice little enhancement to the visual of your motorcycle..
  • License plate frames with light-up design adds a stylish touch to your vehicle..
  • Frame glows red when running lights are on and brightens when the brake pedal is pressed..
  • Low illumination while you’re using tail lights..
  • High illumination when you brake or turn on the hazard lights..
Check Stock