Top Low Feedback Capacitance Reviews

GOLDCHAMP Digital Multimeter Capacitance Meter 200pF-20mF Meter Capacitor Handheld Multimeter Tester with Multi Testers Manual Range Measure Tool, Back Light, Data Hold

  • 【Capacitance Meter】This is professional multimeter only for capacitor testing meter, the Capacitance Range: 200pF/2000pF/20nF/200nF/2uF/20uF/200uF (Accuracy: ±0.5% ).
  • 【Easy Operation】With easy ZERO setting, Back light, Data-Hold, this is a widely used multimeter tool for home, school, home electrical repair..
  • 【LCD Display High Accurate】Large LCD screen for easy reading. High accurate 1999 counts and low power consumption, powered by 9V battery ..
  • 【Electrical Necessity 】Foldable Stand on Back, compact size and lightweight, easy to carry anywhere, it is electrical engneering necessity in pack..
  • 【Widely Capacitance Range】It can be used in selecting capacitance, measuring unknown capacitance. Matching capacitance, and measuring the capacitance of cable, switch and PCB electrocircuit..
Check Stock

Rockville RBG18S 18' 2000W Active Powered PA Subwoofer W/Dsp+Limiter Pro/DJ

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
Check Stock

Sound Storm Laboratories LOPRO10 10 Inch Powered Under Seat Car Audio Subwoofer - 1200 Watts Max Built-in Amplifier Low Profile Remote Subwoofer Control for Truck Boxes and Enclosures

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Digital Capacitance Meter, Multimeter Professional Capacitor Tester, 0.1pF-20,000uF Capacitor Tester, 9 Files Battery Powered Capacitor Meter Tester with 6013L LCD Display

  • 【Test Range】It is a novel handheld LCD display capacitance meter, which can be used to measure 9 data ranges in the range of 0.1 pF to 20,000 uF, which are divided into 9 levels..
  • 【LCD Digital Display】Digital capacitance meter 6013L LCD digital display with data retention and backlight function, accurate reading, maximum display: "1999, It is an ideal electrical measurement tool..
  • 【Equipped with Safety Jacket】The overall structure of the digital capacitance meter is compact, with a safety jacket, equipped with two test lines, and the built-in bracket can make the tester stand stably, and it is easy to operate and carry..
  • 【Specification】The sampling rate of the digital capacitance meter is 2-3 times per second, 9V battery power supply, low power consumption, the power supply is 6F22 9V laminated battery (not included), the size is 5.59"x2.91"x1.38"..
  • 【Widely Application】The multimeter professional capacitance tester can be used for digital analysis, capacitor selection, unknown capacitor measurement, matching capacitors, and measuring cable ca....
Check Stock

Capacitor Meter Tester UYIGAO Digital Battery Powered Capacitan Capacitor Meter Tester 6013L LCD Display

  • 【Low Power Consumption】 - Digital capacitance table 6013L, powered by a 9V battery, low power consumption, with the data retention and backlighting function..
  • 【EASE OF USE】 - The instrument structure is compact, with a safety jacket, easy to operate and carry, is the ideal electrical measurement props..
  • 【LCD Display】 - It is a novel handheld LCD display capacitive table that can be used to measure 9 range of data over a wide range from 0.1 pF to 20,000 uF..
  • 【IDEAL FOR COMMERCIAL】 - The table can be used for digital analysis, selection of capacitors, measurement of unknown capacitors, matching capacitors, measuring cable capacitance..
  • 【WIDE RANGE】 - of tests for Voltage, Current, Resistance, Continuity, Capacitance, Frequency.
Check Stock

PA 5.0 Farad digital Power Capacitor

  • 3 Digit Super Bright Blue Digital LED Voltage Display.
  • Audible Warning Tone for Reverse Polarity, Voltage Overload and Low Battery Voltage.8 Farads with digital voltage display.
  • Voltage Measurement Accurate to + / - 0.1 VDC.
  • Automatic Sleep Status When Volume Is Low Or There Is No Voltage Variation Present.
  • Capacitance: 8,000,000, Working Voltage: 16 VDC, Surge Voltage: 24 VDC.
  • Equivalent Series Resistance: 0.015 Ohm @ 100 Hz / 25°C, Capacitance Tolerance: + / - 10%.
  • Dimensions: 9 x 6 x 2, Unit Weight: 5.3 Lbs.
Check Stock

Capacitor Tester Capacitance Meter Handheld Digital Professional Capacitor Tester with LCD Display-0.1pF - 20000uF Powered by a 9V Battery Not Include

  • Capacitor Tester Handheld Digital Professional Capacitor Tester with LCD Display-0.1pF - 20000uF Powered by a 9V battery (Not Include).
  • High Accuracy: Support 200pF, 2000pF, 20nF, 200nF, 2uF, 20uF, 200uF (+/-0.5%+/-20bit), 2000uF (+/-2.0%+/-20bit), 2mF (+/-4.0 %+/-20 digits)..
  • Wide application: can be used for digital analysis, capacitance selection, unknown capacitance measurement, matching capacitance, cable capacitance....
  • with Lcd display: Simple operation, large LCD screen displays numbers, accurate readings, and low power consumption..
  • Simple operation: the instrument has a compact structure and a safety jacket, which is easy to operate and carry.
Check Stock

Amprobe - 3026976 LCR55A Inductance, Capacitance, and Resistance Tester

  • Tests capacitance, resistance, and inductance, and checks transistors and diodes to verify functionality and compatibility of electrical circuits and devices.
  • Zero-adjust pots help eliminate stray capacitance, resistance, and inductance for more accurate readings.
  • Comes with a set of detachable test leads with test probe tips and two alligator clips for a more secure, hands-free connection than probe tips.
  • Diode and transistor test checks for proper functioning of the circuit's diodes and transistors, including microwave diodes.
  • Audible continuity buzzer confirms that a circuit is capable of conducting current.
  • The ultimate component checker measures inductance, capacitance, resistance, transistors, diodes and microwave diodes.
  • Plug-in test slots and test leads with threaded alligator clips.
  • Data hold, Max hold, "Zero adjust" pot for Ohms, Low battery indication, Auto-power off.
Check Stock

Donner 6 Inch Guitar Patch Cable Guitar Effect Pedal Cables Black 6 Pack

  • Solid and durable, good connection cable transmits high fidelity signal to the equipment. 21 AWG high quality audio cable, 6" long for easy fit..
  • Shielding provides noise rejection for quiet operation, ultra low capacitance which lends to a pure signal transparency..
  • Two big core audio plug, In=Out Technology, molded TS 1/4" Plugs are perfect for pedal boards..
  • Standard audio connector, solid outside casting, utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone..
  • Used for audio signal transmission of microphone, amplifier, mixing console and other equipment..
Check Stock

Donner 12 Inch Guitar Patch Cable Guitar Effect Pedal Cables Black 6 Pack

  • Solid and durable, good connection cable transmits high fidelity signal to the equipment..
  • 21 AWG high-quality audio cable, 12" long, and good applicability. Our effect cables provide noise rejection for quiet operation, ultra-low capacitance which makes sure the signal is not disturbed..
  • Two big core audio plug, In=Out Technology, molded TS 1/4" Plugs are perfect for pedalboards..
  • Standard audio connector, solid outside casting, utilize extremely high content OFC conductors for low capacitance and clear tone..
  • Used for audio signal transmission of microphone, amplifier, mixing console, and other equipment..
Check Stock

BOSS Audio Systems Car Audio systems

  • 3 Digit Bright Red Digital LED Voltage Display.
  • Audible Warning Tone for Reverse Polarity, Voltage Overload and Low Battery Voltage.Surge Voltage 24 VDC.
  • Capacitance: 3,500,000, Capacitance Tolerance: + / - 10%, Voltage Measurement Accurate to + / - 0.1 VDC.
  • Working Voltage: 16 VDC, Equivalent Series Resistance: 003c0.00195 mW @ 120 Hz / 25°C.
  • Dimensions: 4 x 4 x 11.4, Unit Weight: 6.4 Lbs.
Check Stock

Proster LCR Meter LCR Multimeter Tester for Capacitance Resistance Inductance Measuring Meter with LCD Over-range Display

  • Proster LCR Meter: inductance, capacitance and resistance measuring meter,it is a Specialdigital instrument which is easy to be operated, the reading....
  • High Accuracy : (Inductance) Measuring accuracy up to ±(2%+5).
  • (Capacitance) Measuring accuracy up to ±(2%+5)Forward voltage drop of diode:Displaty....
  • Rotable LCD Display : Multi angle adjustment for easy reading.There is no need to hold tester while measuring, more convenient operation..
  • New Version Test Leads: Comes with crocodile clip/ Test Loads/ mini Alligator Clip.
  • The black pen is connected to the negative pole and the red test....
Check Stock

Bullz Audio 3300W 20VDC BCAP3.3 Car Digital Power 3.3 Farad Capacitor Cap

  • POWER CAPACITOR: 2 Farad 20-Volt LED Digital Voltage Car Audio Power Capacitor.
  • Capacitance: 2 farad, 2 million microfarad.
  • AUDIBLE WARNING TONE: Audible warning tones for reverse polarity, low battery voltage and voltage overload.
  • CAPACITOR SPECIFICATIONS: Percent capacitance tolerance: 10.
  • Equivalent Series Resistance (ESR): 0.00195 ohms @ 120 Hz @ 25 degrees C.
  • 8-GAUGE INSTALLATION WIRING KIT: Includes 17 foot 8 gauge red power cable, 3 foot 8 gauge black ground cable, and 20 foot speaker wire.
Check Stock