Top Low Expansion Reviews

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

31/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56020, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56009, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56059, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56068, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

7/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56067, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

3/4\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56063, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

7/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56017, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

Higoo 2PCS 11mm Dovetail to 20mm Picatinny/Weaver Low Pro Snap-in Rail Adaptor

  • Top slot with spring tension retraction/expansion design to snap into Picatinny/Weaver base.
  • Extremely low profile and lightweight,Removable Stop Pin for Extra Secure Installation.
  • Top Slot with Spring Tension Retraction/Expansion Design to Snap into Picatinny/Weaver Base.
  • Type: Picatinny/Weaver Contains Right Angle Wrench*1.
Check Stock

1 3/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56049, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 7/8 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

Drill America 11/16\ HSS Straight Shank Machine Expansion Reamer (Pack of 2)

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

JRLGD 50ml Glass Schlenk Storage Tube Flask with 0-8mm High Vacuum Valve, Outer Diameter×Height 28×140mm

  • -【Specifications】Capacity of 50ml, storage tube outer diameter×height 28×140mm.
  • -【Material】Made of high borosilicate glass, it has the advantages of light weight, low thermal expansion coefficient, strong thermal shock resistance, can withstand 450 ° C high temperature for a long time, clear and transparent, uniform quality, widely used in optics, optoelectronics, photonics and Analysis equipment and other fields..
  • -【Suitable for】Schlenk flask is an indispensable laboratory glassware for reaction to air-sensitive chemical reactions. Compared with non-air-sensitive reactions, the schlenk flask has a 0-4mm high vacuum valve, which is connected to the schlenk line and controls the channel inert gas or vacuum..
  • -【Uniform wall thickness, durable】Low expansion rate, uniform wall thickness, strong and durable. High vacuum valve on top, can be evacuated or filled with gas..
  • -【Various models】We also provide a variety of other types of schlenk flask to meet your different needs..
Check Stock

JRLGD 10ml Glass Schlenk Storage Tube Flask with 0-4mm High Vacuum Valve, Outer Diameter×Height 22×55mm

  • -【Specifications】Capacity of 10ml, storage tube outer diameter×height 22×55mm.
  • -【Material】Made of high borosilicate glass, it has the advantages of light weight, low thermal expansion coefficient, strong thermal shock resistance, can withstand 450 ° C high temperature for a long time, clear and transparent, uniform quality, widely used in optics, optoelectronics, photonics and Analysis equipment and other fields..
  • -【Suitable for】Schlenk flask is an indispensable laboratory glassware for reaction to air-sensitive chemical reactions. Compared with non-air-sensitive reactions, the schlenk flask has a 0-4mm high vacuum valve, which is connected to the schlenk line and controls the channel inert gas or vacuum..
  • -【Uniform wall thickness, durable】Low expansion rate, uniform wall thickness, strong and durable. High vacuum valve on top, can be evacuated or filled with gas..
  • -【Various models】We also provide a variety of other types of schlenk flask to meet your different needs..
Check Stock