Top Longboard Sup Reviews

LoveinDIY Non- Adhesive EVA for Kayak//Surf/Paddle Board, Orange

You can arrange, trim, it according to your need.
Comfortable deck traction pad especially designed for your dog, also can be used as tail pad.
Just take your dog out to Stehpaddelboarding/SUP/longboard/surfboard/kayak/surf, you will not and fun together your best friend.
Made from ultralight diamond grooved EVA foam, the design helps make a good grip.
Adhesive at back, easy installation and anti-.

Check Stock

Santa Barbara Surfing SBS - 9 inch Longboard & SUP Single Fin - 9 Center Fin for Surfboard & Paddleboard Black

FITMENT (PLEASE READ): Fits in all standard 10.5" long US fin boxes, please see our fin dimension image and measure you fin box. Also seem out compatability chart image. If unsur, please contact us for fitment details. If after purchase it doesnt' fit, contact us before returning and can take care of easier than Amazon..
SPECIFICATIONS: Depth 9.25", Base: 5 3/4", Sweep/Rake: 30° / MATERIAL: Glass Filled Nylon.
CLASSIC FIN TEMPLATE: The perfect fit for a longboard or SUP, this classic fin templates is designed for center fins for longboards and paddle boards. Medium build and rake make this design the foundation for further fin template exploration. This time tested classic foil paddles easy and provides good hold in both flat water paddling and for turns and noseriding..
INCREDIBLY VERSATILE: Suitable for Longboard / Surfboard / Stand Up Paddle.
FREE "NO TOOL" FIN SCREW: We include our No Tool fin screw and plate set so you can install this on your board right away without any tools..

Check Stock

Abahub 10'' SUP Single Center Fin, No Tool Fin Screw, Fiberglass Reinforeced 10 inch SUP Replacement Fins for Surfboard, Stand-up Paddle Board, Longboard, Blue

...ed and rusted by seawater, it can be used continuously. This surfboard/SUP center fin with high quality and reasonable price is made to last..
1 Size Fits More: It fits more with 10 inches in depth, base width in 6.5 inches, and total weight with hardware of 10oz. This SUP fin is universally compatible. Suitable for Longboard, Surfboard, Stand-up Paddleboard with a standard 8.5″ or 10.5″ center fin box. Balance of speed, flow and response, suitable for all wave conditions, which it’s a preferred choice for beginners and expert surfers..
Easy to Install: With the “No-tool” screw, it takes just seconds to insert and remove the fins, you can install the fin on your board only in a few minutes..
Abahub Warranty: we’ve been manufacturing fins for over 10 years. We know what we’re doing and we stand by our products. If you’re not happy with our products, we’ll offer you replacement or refund with “No Question Asked” warranty..

Check Stock

Dakine Jack Robinson Pro Surf Traction Pad

...ind to your feet while riding and make paddling more comfortable..
FITS ALL BOARDS - The pad is 14” wide x 17.5” tall x 3mm thick, laid down side by side, for the best board control. Cover the top of virtually any board with our 3-piece corduroy front traction pad. Spread the pieces apart to fit your shortboard, longboard, fish, skimboard, and wake surfboard. You can even use multiple pads to cover your longboard or SUP..
QUALITY GUARANTEED - Our surf front traction pad bonds to your board or any hard non-porous surface using super strong 3M Green premium adhesive. Designed by 2 dedicated surfers in California, USA who stand behind their products. If it doesn't work out on your surf or skim board for any reason, send us a message and we'll take care of you. Let's go surfing!.

Check Stock

Abahub 9 SUP Single Center Fin No Tool Fin Screw Fiberglass Reinforeced 9 inch SUP Replacement Fins for Surfboard Stand-up Paddle Board Longboard Black

...ded and rusted by seawater, it can be used continuously. This surfboard/SUP center fin with high quality and reasonable price is made to last..
1 Size Fits More: It fits more with 9 inches in depth, base width in 5.5 inches, and total weight with hardware of 10oz. This SUP fin is universally compatible. Suitable for Longboard, Surfboard, Stand-up Paddleboard with a standard 8.5" or 10.5" center fin box. Balance of speed, flow and response, suitable for all wave conditions, which it's a preferred choice for beginners and expert surfers..
Easy to Install: With the "No-tool" screw, it takes just seconds to insert and remove the fins, you can install the fin on your board only in a few minutes..
Abahub Warranty: we've been manufacturing fins for over 10 years. We know what we're doing and we stand by our products. If you're not happy with our products, we'll offer you replacement or refund with "No Question Asked" warranty..

Check Stock

Santa Barbara Surfing SBS - No Tool Stainless Steel Fin Screw for Longboard and SUP - 3 Pack

NO TOOL REQUIRED: Hand Tighten Against Rubber O-Ring Means No Tools Ever.
RUST PROOF: 316 Stainless Steel Will Not Rust In Fresh or Salt water..
COMPATIBLE WITH 99% OF BOARDS: Fits All Standard Surfboard Fin Boxes For Longboard, SUP, Single Fin, Paddleboard.
NOT COMPATIBLE WITH: Starboard & Naish Paddleboards owners report these are too short for those boards..
SUPER VALUE: 3 Pack Means You'll Have An Excuse To Buy More Boards.

Check Stock

MBB Moped Surfboard Racks by Moved By Bikes Compatible with Mopeds or Electric Bikes with Tubular Cargo Racks Longboards Shortboards SUP

Quick release bars make for quick and easy removal when not in use, no tools required.
Our Moped Racks allow you to carry your longboard, shortboard, or SUP on your Moped. Also work great on many E-bikes and cargo bikes.
All aluminum and stainless steel construction.
Mounts to common moped, E-bike, and cargo bike tubular cargo racks.
Works great with longboards when bars are spread out, or shortboards when bars are mounted together.

Check Stock

Redneck Convent Paddleboard SUP Wall Mount Rack 2-Pack (Pair) Paddle Board, Longboard, Surfboard, Snowboard, Garage Storage Hanger Hook

...dleboards with an 8-inch or less (20.3cm) deck height.
For any length paddleboard (you can space hooks however far apart to accommodate your boat).
HOLDS OTHER ITEMS: Hanger legs have approximate 8-inch (20.3cm) gap and 23-inch (58.4cm) length to hold a paddleboard (SUP), kayak, snowboard, surfboard, wakeboard, ski, longboard, shortboard, body board, small canoe, or even ladder for indoor or outdoor storage in your garage, shop, storage room, showroom, on the side of your house, on your deck, or near your dock.
Frees up space on the ground with enough room to still park your car in the garage.
EASY INSTALLATION: Comes with installation hardware (4 screws and 4 ribbed plastic screw anchor clips) for a quick and simple mounting experience.
BUILT TO LAST: Constructed from heavy-duty powder-coated steel with foam padding to protect the surface of your paddleboard.
Will hold 2 paddleboards indoors or outdoors and will not cause bows in your board like other hanging models.
CONTENTS: Package includes a pair (2) of hangers and installation hardware (4 screws, 4 ribbed anchors).
Size of each rack is approximately 11.5 inches tall x 23.75 inches wide with 1.5-inch thick steel tube outer diameter (OD) (29.2cm x 60.3cm x 3.8cm).

Check Stock

Magneto 40 Inch Pintail Longboard Skateboard | Dark Stained Hard Maple Core Long Board Deck | Cruiser Skateboards, Carver, Freestyle | Skateboard for Adults Teenagers Men Women | Free Skate Tool

MADE BY SKATERS All of our boards are inspired by our location in Southern California, the birthplace of longboarding. We carefully created the Pintail collection with high quality materials to give you the best possible skating experience..
CLASSIC AND CLEAN DESIGN These longboards are surf inspired and are made for cruising and carving. The long boards are finished with a clear sand grit finish to show off the beauty of the longboard deck while still providing good traction..
SWALLOW SHAPE The Swallow shape has a swallowtail that is typically found on shorter boards. The design should inspire you to carve harder and shred up the road..
QUALITY WHEELS 70mm Shore 78A wheels means your board is designed from the ground up for an ideal cruising experience. This Magneto longboard crusier board rides smooth on a variety of different surfaces because of the soft wheels..
ALL EXPERIENCE LEVELS WELCOME This board is easy to ride whether you’re a beginner, you own several boards already or if you are returning to the sport. It’s the perfect accessory or alternative for many outdoor activities or methods of transportation. Take it to the park, the beach, traveling, camping, the bike path, pump track, you name it. Or maybe you’re tired of your bicycle or ska....

Check Stock

South Bay Board Co. - 9” Longboard or Paddleboard Single Fin Kit - Includes Stainless Steel No-Tool Screw & Square Nut Plate - Proper Longboard/SUP Single Fin, Fits 99% of Single Fin Boxes

BEST HIGH PERFORMANCE 9” SINGLE FINS: SBBC sells the best longboard surfboards & paddle boards, so, we also had to make sure our 9” Single Fin was of the same premium, performance-focused quality. Fits all 10.5” long US Fin boxes.
PERFORMANCE LONGBOARD / SUP SINGLE FIN DIMENSIONS: The 9” Single Fin utilizes a fin Depth of 9.25″, Base is 5 3/4″, Sweep/Rake is 30°. Time tested classic foil paddles easy, provides great hold in flat water paddling, and ideal for turns/noseriding.
EASY & INCREDIBLY RELIABLE TO USE: The SBBC Performance 9” Single Fins are incredibly easy to install. Simply drop in the fin and square plate, line up the no-tool-needed screw, and tighten the fin into the fin box – it’s as easy as that.
CUSTOM DESIGNED WITH DURABLE MATERIALS: The 9” Single surfboard / paddle board fin is made with a heavy duty, Glass Filled Nylon material. This makes the fin very stiff and performance focused, while also being very durable and reliable over time.
PREMIER, HONEST HUMAN CUSTOMER SERVICE: South Bay Board Co. has the fastest shipping of any Surfboard brand with the absolute best, REAL humans who use these fins DAILY. We are always here, happy to help with any of your customer service needs.

Check Stock

SBS 8 Longboard & SUP Single Fin - Free No Tool Fin Screw - 8 inch Center Fin for Surfboard & Paddleboard

PERFECT REPLACEMENT FIN: This fin is a direct replacement for many off the rack SUPs and longboards. Upgrade to our 9" or 10" fins for even greater hold and drive..
SPECIFICATIONS: Glass Filled Nylon makes this hard plastic fin strong..
COMPATIBILITY: Works on any SUP or surfboard with a standard 8.5" or 10.5" fin box. KNOWN INCOMPATIBILITIES: Some Inflatable SUPs such as the Bali Solstice, AquaMarine SPK2, see our compatibility image for more..
INCREDIBLY VERSATILE: Suitable for Longboard / Surfboard / Stand Up Paddle.
FREE "NO TOOL" FIN SCREW: We include our No Tool fin screw and plate set so you can install this on your board right away without any tools..

Check Stock

Abahub Inflatable SUP, Wide 10'6

... for Family: With size of 106x34x6 and weight capacity of 375 lbs., this extra wide ABAHUB inflatable paddleboard provides extreme stability so you can balance better while paddling. The 3-layers sidewall sealing minimizes the chance of air leaking. It is the perfect board for a fun day with the family, touring, or longboard-style surfing on small waves..
Versatility is Priority: This iSUP is also a KAYAK. A comfortable neoprene kayak seat and a 4 pieces carbon shaft dual paddle are equipped. Just attach the seat to the D-rings, covert the SUP paddle to double sided kayak paddle, then you can enjoy your ride differently. If youre a fan of paddle board YOGA, simply secure your paddle to the rail paddle hooks, take off the center carry handle cover and start practicing..
Thoughtful Design for Convenient Use: The 14 D-rings design enables plentiful storage space with both head and tail bungees, side rail paddle hooks, kids grip handles and the kayak seat. The large volume travel bag is designed with all YKK zippers, widened 4 should straps and thick support cushion pads, durable and travel friendly..
Why Shop ABAHUB: This paddle board is built with top level quality material, and also equipped with excellent quality accessories such as tough 1680 D back pa....

Check Stock

SBS 10 Surf & SUP Fin - Free No Tool Fin Screw - 10 inch Center Fin for Longboard Surfboard & Paddleboard

CLASSIC FIN TEMPLATE: This is our largest fin template, designed for center fins for longboards and paddle boards. Medium build and rake make this design the foundation for further fin template exploration. This time tested classic foil paddles easy and provides good hold in both flat water paddling and for turns and noseriding.
SPECIFICATIONS: Depth: 10", Base: 6.5", Rake: 28° / MATERIAL: Glass Filled Nylon.
COMPATIBILITY: Works on any SUP or surfboard with a standard 8.5" or 10.5" fin box. KNOWN INCOMPATIBILITIES: Some Inflatable SUPs such as the Bali Solstice, AquaMarine SPK2, see our compatibility image for more..
INCREDIBLY VERSATILE: Suitable for Longboard / Surfboard / Stand Up Paddle.
FREE "NO TOOL" FIN SCREW: We include our No Tool fin screw and plate set so you can install this on your board right away without any tools..

Check Stock