Top Long Arm Threaded Insert Tool Reviews

WINMAX TOOLS AUTOMOTIVE Wishbone Lever Bar Extractor Tool Bottom Arm Control Wheel Bearing Ball Joint

  • ...ernative to chains and specialty lower control arm tools..
  • SPECIALLY DESIGNED AUTOMOTIVE PRY TOOL - This small pry tool works best with a 7/8" diameter, at least 35" long pry bars. Simple yet effective, there's no tool like this lower control arm prying tool. Slip the hooked part of the tool over the control arm and insert the pry bar on the tool's eyelet. Pry down, applying pressure as you do so. In no time you'll be able to pull the ball-joint from the spindle..
  • HIGH-QUALITY LOWER CONTROL ARM TOOL - This is not your average bent metal. Made of high strength carbon steel, there's no need to worry about this tool bending or breaking on the job..
  • BEST VALUE 2-PACK TOOL - If you're working on a shop with other mechanics, you definitely need more than one of these prying tools. Not only are they the cheapest, but these tools are also the most convenient. Once you use this lower control arm prying tool, there's no looking back to using chains ever again..
  • US-BASED CUSTOMER SUPPORT - Don't hesitate to contact our US-based customer service team for your questions and suggestions regarding our products..
Check Stock

E-Z LOK EZ-329-6 Thread Repair Kit for Metal Carbon Steel Threaded Inserts 3/8-16 and Installation Tools

  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair tool kit..
  • CARBON STEEL INSERTS – Kit includes standard carbon steel threaded inserts that are easy to install with standard tools..
  • FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • KIT INCLUDES – Convenient kit includes threaded inserts for metal, drill, tap, and threaded insert installation drive tool..
Check Stock

E-Z Lok Threaded Inserts For Metal Assortment Kit Carbon Steel Metric Internal Threads M3-0.5 M4-0.7 M5-0.8 M6-1.0 M8-1.25 50 pieces

  • THREADED INSERTS FOR METAL – E-Z LOK Threaded Insert Assortment Kit for metal. Threaded inserts for putting strong, machine threads in metal..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in metals with this thread repair kit..
  • AVAILABLE OPTIONS – Kit is available in carbon steel threaded inserts and stainless steel threaded inserts that are easy to install with standard tools..
  • FOR USE WITH APPLICATIONS – The metal threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

Otis Patriot Series FG-701-40 .40 cal Pistol Kit

  • 100% cotton 3” patches, .40 caliber mop, square patches, long slotted tip and two rods.
  • 8” aircraft grade Memory-Flex cables with large slotted tip for proper Breech-to-Muzzle cleaning.
  • Multi-purpose tool functions as a t-handle, rod handle (attach a rod to the 8-32 threaded insert) and bit driver (insert selected bit into bit holder). Four bits included: 5/32” hex, T20 hex, Phillips #0, Phillips #2.
Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

  • REPAIR DEEP-SEATED PLUGS: The ABN Spark Plug Thread Repair Rethreading Set, 14mm Metric – Rethreading Tool Kit is a comprehensive and time-saving kit that incorporates taper and lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
  • VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
  • Stepped tap ensures correct alignment of cutter in existing spark plug hole.
  • Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
  • EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
  • Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
  • Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
  • EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch ....
Check Stock

Wera 3950 PKL Stainless Long Arm Ballpoint 4.0mm Hex Key

  • Stainless long arm ballpoint Metric Hex Key, 4.0mm hex tip, 5-3/8 inch length.
  • Manufactured from 100% Stainless steel, preventing extraneous rust caused by use of conventional tools contaminating stainless fasteners.
  • Hex-Plus technology prevents rounding of screw recess and transfers up to 20% more torque.
  • Ballpoint on long-arm allows user to insert tool quickly into screw and work at an angle in confined spaces.
Check Stock

Wera - 5022703001 3950 PKL Stainless Long Arm Ballpoint 3.0mm Hex Key

  • Stainless long arm ballpoint Metric Hex Key, 3.0mm hex tip, 4-7/8 inch length.
  • Manufactured from 100% Stainless steel, preventing extraneous rust caused by use of conventional tools contaminating stainless fasteners.
  • Hex-Plus technology prevents rounding of screw recess and transfers up to 20% more torque.
  • Ballpoint on long-arm allows user to insert tool quickly into screw and work at an angle in confined spaces.
Check Stock

Wera - 5022705001 3950 PKL Stainless Long Arm Ballpoint 5.0mm Hex Key

  • Stainless long arm ballpoint Metric Hex Key, 5.0mm hex tip, 6-1/16 inch length.
  • Manufactured from 100% Stainless steel, preventing extraneous rust caused by use of conventional tools contaminating stainless fasteners.
  • Hex-Plus technology prevents rounding of screw recess and transfers up to 20% more torque.
  • Ballpoint on long-arm allows user to insert tool quickly into screw and work at an angle in confined spaces.
Check Stock

POWERTEC QTI1004 Threaded Inserts for Wood Furniture | Zinc Plated | 3/8”-16 Internal Threads | 18mm Length – Pack of 50

  • INCLUDES: (50 pack) 3/8-16 Threaded Inserts (also referred to as Insert Nuts).
  • FUNCTION: Primarily used on hardwoods, they offer a threaded design that when inserted into a pre-drilled hole provides massive holding power, and prevents the wood insert nut from turning or pulling out.
  • VERSATILE: Although perfectly suitable for softer wood and plastic based cabinetry/ furniture projects, these threaded inserts excel with hardwoods such as Cherry, Maple, Mahogany, Oak and Walnut.
  • EASY TO USE: Simply install with a screwdriver or optional drive tool, POWERTEC 71380(not included) after drilling the appropriately sized hole.
  • SPECS: Zinc Plated Carbon Steel, Machine Thread, Internal Threads 3/8”-16, Total Length 0. 709 (18mm).
Check Stock

Wera - 5022706001 3950 PKL Stainless Long Arm Ballpoint 6.0mm Hex Key

  • Stainless long arm ballpoint Metric Hex Key, 6.0mm hex tip, 6-3/4 inch length.
  • Manufactured from 100% Stainless steel, preventing extraneous rust caused by use of conventional tools contaminating stainless fasteners.
  • Hex-Plus technology prevents rounding of screw recess and transfers up to 20% more torque.
  • Ballpoint on long-arm allows user to insert tool quickly into screw and work at an angle in confined spaces.
  • Limited Lifetime Warranty, German Engineered.
Check Stock

POWERTEC QTI1002 Threaded Inserts for Wood Furniture | Zinc Plated | 1/4”-20 Internal Threads | 11.9mm Length – Pack of 50

  • INCLUDES: (50 pack) 1/4-20 Threaded Inserts (also referred to as Insert Nuts).
  • FUNCTION: Primarily used on hardwoods, they offer a threaded design that when inserted into a pre-drilled hole provides massive holding power, and prevents the wood insert nut from turning or pulling out.
  • VERSATILE: Although perfectly suitable for softer wood and plastic based cabinetry/ furniture projects, these threaded inserts excel with hardwoods such as Cherry, Maple, Mahogany, Oak and Walnut.
  • EASY TO USE: Simply install with a screwdriver or optional drive tool, POWERTEC 71383(not included) after drilling the appropriately sized hole.
  • SPECS: Zinc Plated Carbon Steel, Machine Thread, Internal Threads 1/4"-20, Total Length 0. 468”(11. 9mm).
Check Stock

DEWALT Scroll Saw, Variable-Speed, 1.3 Amp (DW788), Yellow, 20-Inch

  • Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts.
  • Exclusive tool free blade clamps allow blade changes in seconds. Depth of Cut (inches): 2 inch.
  • On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm.
  • Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation.
  • Arm lifts so blade can be easily threaded through the material for inside cuts.
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock