Top Lipo Jst Connector Reviews

RuiLing 2pcs 15cm JST-XH 4S LiPo Balance Power Cable Connector 22AWG Extended Charging Wire Male Female Plug for RC Drone FPV Quadcopter Rechargeable Lipo Battery Charger DIY

  • Type: 2 x JST-XH 4S LiPo Battery Balance Charging Extension Wire, ideal for all types of R/C (Cars, Boats, Planes).
  • Connector: With balance charger male and female JST-XH plug, wrks with 4S batteries with a JST-XH balance plug..
  • Material: Made of 22AWG soft SR wire, 15cm length, shrink tube protected female end, fine workmanship, suitable for large current charging, durable to....
  • Convenient & Practical: This Extension Lead is for connecting the Lipo Balance Lead to your charger, making it much easier to connect because the....
  • Wide Use: Apply to Most Lipo Battery Chargers, such as: Dualsky, Align, hexTronik, Flightmax, Zippy, Rhino and many other brands of lipo packs..
Check Stock

2S 1000mAh 7.4V Lipo Battery 2Pcs SCX24 Batteries with PH2.0 & JST Plug 35C Lithium Battery with 2 in 1 USB Charger for WLtoys A949 A959 A969 A979 Most 1/10 1/16 1/18 1/24 RC Cars

  • JST & PH2.0 double plug: This 2s battery is a JST plug and PH2.0 plug 2-in-1 rechargeable battery. Lipo battery with JST plug can be used for WL toys....
  • Convenient charger: 2-in-1 USB Balance Charger with XH-3P Connector can charge 2pcs 2S batteries at once and the USB interface of the charging cable....
  • AB clip special design: AB clips in 2S RC battery's and charger's XH-3pin connector, which can enhance battery durability, protect the battery....
  • 300 cycle life: Compared with other 2s lipo batteries, our battery can increase the service life by 30%, which can reach at least 300 times of....
  • Lightweight but powerful: 7.4v mini lipo battery size is 55mm*30mm*14mm and only weighs 45g. Although this is a small RC lithium battery, it can....
Check Stock

Turnigy Quad 4x6S Lithium Polymer Charger 400W DC Only

  • T-Power - Made with the Brand-new Input Voltage Range: AC 100V - 240V / OUTPUT : 12V 12AMP ( DC 11.0~18.0V 10A compatible ) item come w/ barrel connector and xt60 connector ).
  • Compatible Model: Turnigy Accucel-6 80W 10A Balancer Charger LiPo LiFe NiMh NiCd JST-XH.
  • Hitec HRC44177 , RCD 44177 X1 Touch 55W AC/DC Multi-Chemistry Touch Screen Battery Charger / Replacement for SKYRC D100 employs LiFe LiIon LiHV NiMH NiCd LiPo Battery 2 Ports Dual Balance Charger.
  • Ultra Power UP120AC Duo LiIon LiHV NiMH NiCd LiPo Battery 2 Ports Dual Balance Charger / HOBBYMATE Duo Lipo Charger Dual Charge Port, Fast Lipo Charger, AC/DC Balance Charger 12A 120-240W.
  • T-Power - manufactured with the highest quality materials and include multiple smart features safeguarding against IV - incorrect voltage, SC - short circuit, IO - internal overheating. CE/FCC/RoHS certified.
Check Stock

7.4V Lipo Battery 2S 1000mAh: 35C Battery with PH2.0 & JST Plug A xial SCX24 Lithium Batteries 2 Pack Rechargeable Batteries for WL Toys RC Car Most 1/10 1/16 1/18 1/24 Scale Racing Trucks

  • JST & PH2.0 double plug: This 2s battery is a JST plug and PH2.0 plug 2-in-1 rechargeable battery. Lipo battery with JST plug can be used for WL toys A949 A959 A969 A979 K929, Ex ceed RC cars and other RC vehicles. Lipo battery with PH2.0 plug can be used for A xial SCX24 most 1/10 1/16 1/18 1/24 racing car RC trucks.
  • Wide application: This battery can fit most 2S JST or PH2.0 plug remote control devices. In addition to fit for RC cars, this battery can not only power drones or RC Boats but also be used in the transmitter of them.
  • AB clip special design: AB clips in 2S RC battery's XH-3pin charging connector, which can enhance battery durability, protect the battery charging cable and help you plug and unplug the charging cable quickly and easily.
  • 300 cycle life: Compared with other 2s lipo batteries, our battery can increase the service life by 30%, which can reach at least 300 times of high-efficiency, safe and fast charging and discharging efficiency.
  • Lightweight but powerful: 7.4v mini lipo battery size is 55mm*30mm*14mm and only weighs 45g. Although this is a small RC lithium battery, it can reduce the weight of your drone or RC car and provide huge power support.
Check Stock

Gens ace 11.1V 2200mAh 3S 25C LiPo Battery Pack with Deans Plug for RC Heli Airplane Car Boat Truck

  • Gens ace Professional LiPo Battery, best 3s 11.1v lipo for your rc model.
  • Quickly Recharged, Long Cycle Life (150 times minimum), up to 200Wh/kg energy density.
  • Connector, Deans Plug, Balancer Connector, JST-XHR.
  • Applications: Specially Designed for 800MM Warbirds, EPP 3D plane, small heli, QAV180/210, DJI Phantom Quadcopter, DJI Phantom FC40 Spare, Walkera E22.
  • What you get: Gens ace LiPo Battery Pack with Deans Plug & Local after-sales service (located in Dublin, CA).
Check Stock

6PCS JST Plug Splitter JST Male Female Y Cable JST Y Parallel Adapter Harness JST to JR Adapter for Traxxas TRX-4 RC Car Crawler Truck Cooling Fan ESC Battery Motor

  • Package includes 6PCS Cable. 1PCS Male JST to Female JR (Futaba) Cable, 1PCS Female JST to Male JR Cable,1 Male to 2 Female Y Harness, 1 Male to 3 Female Y Harness, 1 Female to 2 Female Y Harness, 1 Female to 3 Female Y Harness..
  • They are special for Traxxxas car truck crawler and HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car, mini RC helicopter and indoor 3D plane, great for small Lipo and NiMH connection..
  • The Male to Female Y Harness can be used to power 2 cooling fans, Plug the JST male connector on your receiver, then you can connect the 2 cooling fans on the JST Female connector, also can run other parts which are in JST male plug, such as lights, winch..
  • The Female to Female Y Harness are used for TRX-4 ESC, it allows to be powered by TRX-4 ESC and run the lights, winch, cooling fan at the same time..
  • Cable length: 15cm/5.9inch for splitter cable, 10cm/3.9inch for JST to JR cable.
Check Stock

Battery Packs Lithium Ion Polymer Battery 3.7V 1200mAh (1 piece)

  • Premium LiPo Rechargeable Battery - Our lithium polymer battery, known as 'lipo' or 'lipoly' battery, is thin, light, and powerful. It’s rechargeable hundreds of times, making it an excellent choice for those who need a reliable power source..
  • Versatile Polymer Battery - This polymer rechargeable battery is an ideal battery replacement for the Ecologic Mart reading light clip. It is also a high-capacity power source for various devices like MP3s, MP4s, PSPs, and GPS trackers..
  • Light and Compact - Bring an extra lipo rechargeable battery to keep your devices charged up. Since it’s lightweight and portable, you can easily place the 3.7 volt battery in your pouch or handbag..
  • Don't Mistake it for PH2.0 - Note that this polymer battery is NOT PH2.0. If the lithium polymer battery connector you are looking for is 2.0, you need to cut the wires that it currently has and replace them with another battery connector..
  • Accurate Specifications - Our lithium ion battery 3.7v 1200mah is known for its high energy density with the Red(+) and Black(-) labels. The 1200mah lipo battery also has an approximately 4.5 Wh battery capacity. It comes with a Micro JST 1.25mm 2Pin Male Connector with a 1.25 mm distance between two wires..
Check Stock

Tenergy TB6-B Balance Charger and Discharger and Lipo Bag for Charging, 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-Po Battery Packs w/ Tamiya/JST/EC3/HiTec/Deans

  • Bundle includes Tenergy TB6-B hobby battery charger with Tamiya/JST/EC3/HiTec/Deans connector and Tenergy's large lipo zipper bag measuring 8.5x6.5x5.7 inches.
  • Tenergy TB6-B balance charger/discharger is ideal for all hobby battery packs that are NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs..
  • With one multi-charging harness, this AC balance charger is compatible with battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added..
  • Tenergy's large LiPo bag reduces fire hazard when recharging or storing multiple airsoft Lithium-Polymer battery packs..
  • Charging hole with velcro seal design reduces airflow and oxygen helping to smother flames before it can get out of control while recharging a LiPO battery pack.
Check Stock

ShareGoo 4PCS JST Plug Splitter,JST Male Female Y Cable,JST Y Parallel Adapter Splitter Harness for Traxxas TRX-4 1/10 RC Car Crawler ESC Battery Motor Cooling Fan,15CM/5.9"

  • Package includes 4PCS JST Y Cable.These are 1 Male to 2 Female Y Harness,1 Male to 3 Female Y Harness,1 Female to 2 Female Y Harness,1 Female to 3 Female Y Harness.They are special for Traxxxas car,alao can used for HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car..
  • The Male to Female Y Harness(Dual Fan Wiring Harness)can allows use of 2 cooling fans,Plug the JST male connector on your receiver,then you can connect the 2 cooling fans on the JST Female connector,also can run the the other part which are in JST male plug,such as lights,winch..
  • The Female to Female Y Harness are used for TRX-4 ESC,it alows to be powered by TRX-4 ESC and run the the lights,winch, cooling fan at the same time..
  • Also can be used on most mini RC helicopter and indoor 3D plane,great for small Lipo and NiMh connection..
Check Stock

T POWER Ac Adapter Compatible with SKYRC D100, Turnigy Accucel 6 V2 80W 10A Balancer Charger LiPo Life NiMh NiCd JST-XH & Hitec HRC44177 HOBBYMATE Duo Lipo Ultra Power UP120AC Power Supply Charger

  • T-Power - Made with the Brand-new Input Voltage Range: AC 100V - 240V / OUTPUT : 12V 12AMP ( DC 11.0~18.0V 10A compatible ) item come w/ barrel connector and xt60 connector ).
  • Compatible Model: Turnigy Accucel-6 80W 10A Balancer Charger LiPo LiFe NiMh NiCd JST-XH.
  • Hitec HRC44177 , RCD 44177 X1 Touch 55W AC/DC Multi-Chemistry Touch Screen Battery Charger / Replacement for SKYRC D100 employs LiFe LiIon LiHV NiMH NiCd LiPo Battery 2 Ports Dual Balance Charger.
  • Ultra Power UP120AC Duo LiIon LiHV NiMH NiCd LiPo Battery 2 Ports Dual Balance Charger / HOBBYMATE Duo Lipo Charger Dual Charge Port, Fast Lipo Charger, AC/DC Balance Charger 12A 120-240W.
  • T-Power - manufactured with the highest quality materials and include multiple smart features safeguarding against IV - incorrect voltage, SC - short circuit, IO - internal overheating. CE/FCC/RoHS certified.
Check Stock

4pcs 520mAh 1S LiPo Battery 80C HV 3.8v LiHV Battery JST-PH2.0 Connector Upgraded for Inductrix FPV Racing Drone Like EMAX Tinyhawk 2 etc

  • Updated 1S HV 660mAh battery is the great choice of Tiny Whoop Blade inductrix with the connector plug of JST-PH2.0 PowerWhoop connector.
  • C-rate up to 90c burst 180c better than other 80C lipo battery, compact size of 61 * 18 * 7 mm, many charges on these with no sagging.
  • The weight of the 660mAh 1S Lipo battery only 81g, it is 81g lighter than the 450mAh 1s lipo battery, but better performance than it.
  • This was a huge upgrade from the EMAX 450mah 1S batteries, your flight time can upwards of 5 mins on these batteries compared to a previous max of 2 mins.
  • Fit for EMAX Tinyhawk series, like TinyHawk 2, EZ Pilot, TinyHawk S. Also work with other 1S micro FPV racing drone.
Check Stock

TATTU 500mAh 1S Lipo Battery Pack 3.7V 95C with JST-PHR Plug for Emax Tiny Hawk/Happymodel Snapper7

  • 【Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Specification】：Battery Voltage：3.7V, Configuration：1S, Capacity：500mAh, Discharge: 95C, Plug: JST-PHR.
  • 【High-Performance Battery】： A Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack with full capacity. Long Cycle Life Offers high power and a very long time for your Multirotor FPV from size 100 to 180..
  • 【Dimensions】: Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack dimensions: 58*18*8mm/2.28*0.71*0.31inch.
  • 【Application】: Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack is suitable for Tiny Hawk (PH2), EMAX Tinyhawk freestyle (PH2), EMAX Tinyhawk S (PH2), Happymodel Snapper7. Multirotor FPV from size 100 to 180..
  • 【What you get】: A Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack With JST-PHR Plug. Please enter "YOUR ORDER" to contact us directly if you have any problems with our product, we will reply you within 24 hours..
Check Stock

Tenergy Align Balancing Cable 7.4V 2-Cell LIPO car Battery Packs

  • Align balancing cable for Tenergy LIPO car battery packs. 22Awg PVC wire with JST 3-Pin connector..
Check Stock