Top Light Umbrella Mount Reviews

Universal 3-in-1 Tri-Hot Shoe Mount Flash Bracket Holder with 2 Umbrella Hole for Light Stand Camera Tripod Reflective Umbrella Studio Flash Soft Box Speedlite Diffuser

1. The flash bracket is made of metal material, surface antioxidant treatment.
hot shoe mount is made of aluminium alloy, stainless steel spring, very solid.
2. Three hot shoes can be adjusted independently within the rang of 15.5mm to 18.5mm, compatible with standard cold foot flashes of Canon, Nikon, Pentax, Ricoh, Olympus, Panasonic and so on.
3. The flash holder can be removed from the tri-hot shoe mount.
the top of the holder with 1/4" screw hole which can be connected with 1/4"screw and extended to other use.
the flash holder uses gear meshing, can tilt from left to right within 180°.
locked by screw, easy to use together with spanner.
4. The tri-hot shoe mount has a built-in lateral umbrella hole locked by push bar and reed, suitable for umbrella shaft of diameter less than 10mm.
5. The umbrella holder has a vertical umbrella hole, suitable for umbrella shaft of diameter less than 10mm.
with a 18mm hole in the bottom, if used with 1/4" to 3/8" adapter screw, can be used with all kinds of light stands and tripods, including light stands with 15.8mm diameter head, and tripods or monopods with 1/4" or 3/8" screw head..

Check Stock

Anwenk Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Reflector Holder for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Studio Light LED Light, 1Pack

Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
A hole with locking screw in middle specially designed for holding umbrella..
Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system..

Check Stock

SmallRig RA-L65 Lantern Softbox Quick Release-One Step, 26in Light Modifier with Fabric Barn Doors, Softbox Diffuser for SmallRig Video Light 120B, 120D, 220B, 220D and Other Bowens Mount Light-3754

...fier can provide omnidirectional soft light source with 270° beam angle, so that you can fill the light without shadow. Light source control: SmallRig softbox provides four-side fabric barn doors, you can close 1~4 side according to your needs, flexible control light source..
【Soft Light Fabric & Solid Supporting Umbrella Rib】: Fabric – Using high-performance soft light fabric, adding high reflective coating, maximizes the high CRI of the video lamp itself, while bringing a 360°soft light effect. Supporting Umbrella Rib-Adopt 12 high toughness supporting umbrella rib, with high memory rebound characteristics, can withstand thousands of times of repeated disassembly use. Top chuck – Made of stainless steel for durability..
【Bowens Mount Compatiblity】: SmallRig lantern softbox compatible with all bowens mount light, for example: SmallRig video light 120B, 120D, 220B, 220D, and all other bowens mount for flash light, LEDS light, etc..
【Package Contents】: Lantern Softbox x1 (65CM), Fabric Barn Doors X1 (Velcro), Carry Bag X 1, User Manual x1..

Check Stock

CALIDAKA Umbrella Mount Holder Adjustable Umbrella Mount Stand No Need Wrench to Attach/Detach Umbrella Clamp for Wheelchair Walker Rollator Bicycle Pram Stroller Black

【High Quality Removable Umbrella Holder】The umbrella holder for stroller is made of rust free thickened stainless steel and abs plastic, super....
【Adjustable Umbrella Holder Mount Stand】The universal umbrella holder, down telescopic adjustment, along with the length you need, clip umbrella....
【Easy to Install Umbrella Clip Mounting Attachmen】Adjustable Umbrella Mount Holder No Need Any Tooling to Attach Umbrella Clamp, Easy to install....
【Multifunctional Umbrella Mount Holder】Clip umbrella parts of the regulator can be adjusted 360 °direction.Umbrella stroller holder. No mounting....
【Widely Use Umbrella Mount Stand No Need Wrench to Attach】The umbrella holder fits universal umbrellas and can be attached to a variety of handle....

Check Stock

GODOX 32\/ 80cm Umbrella Octagon Portable Softbox Reflector for Studio Photography Speedlite Flash

The light Umbrella Octagon diffusion surface is 32"/ 80cm, with wide range of applications, suitable for portrait or product photography..
Can be used with flashes and some studio flash lights with umbrella hole.Note:the softbox no bowens mount..
High quality flash diffuser, minimize light loss and maximize light spread..
With zipper opening, easy to install the soft box with the stand..
It is a soft box when being spread and like an umbrella when being folded, easy to use..

Check Stock

JINTU Dual Hot Shoe Flash Speedlite Bracket Stand Umbrella Holder Adapter with 1/4' 3/8' Screw Mount for Canon Nikon Yongnuo Godox Flash Speedlite Video Camera Camcorder

- Dual hot shoes adapter, universal for flash with standard hot shoe mount..
- Standard 1/4 inch screw can connect many flash lights directly, which is convenient for photographers to use the flash to make multi-directional fill light when shooting outside..
- Built in umbrella socket, and the angle of the flash can be adjusted 180 degrees, perfect for holding your photo umbrella..
- Universal cold shoe mount compatible with Canon, Nikon etc most DSLR cameras and other flashes with standard shoe mount or video LED light, studio light..
- Aluminium alloy made, sturdy and durable..

Check Stock

2Pack Updated Flash Bracket Flash Stand Light Stand Bracket Mount with Umbrella Holder Mount Swivel for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Speedlite Studio Light LED Light

2Pack of Flash Bracket for Most Flash Speedlite- This flash bracket combines a universal E Type Flash cold shoe bracket (updated), Swivel light stand....
Your Expensive Flash will not Fall - Updated Universal Cold Shoe Bracket on top, the cold shoe will catch the flash shoe base firmly without dropping....
Umbrella Holder Mount- This flash bracket is with a hole with locking screw in middle specially designed for holding umbrella..
Light Stand Bracket Mount- Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20....
Easy Adjustment- This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different....

Check Stock

Neewer 35.4''/90cm Octagonal Softbox with S-Type Bracket Mount, Carrying Case Compatible with Neewer TT560 NW561 NW625 NW635 NW645 NW655 NW-670 750II Speedlites and Q3 AD200Pro Flash Strobe, etc

Great compatibility with NEEWER TT560 750II NW670 Series Speedlite Flash.
Unique speedlite mounting method: the speedlite can be clamped firmly into the mount both horizontally and vertically.
No Pre-assembly or Post Disassembly, Mounts with Light Pressure - No Touch-Fasteners.
Made of Impact Resistant ABS Plastic, Precise Stepless Tilt Control, Large Adjustment Handle, Integrated Umbrella Mount.
The plastic gasket of the inner bracket can be removed, so that larger size light can be installed on the bracket.
Adjustable for Different Shoe Mount Flashes and Barebulb Strobes, Allowing Depth and Spread Control of the Mounted Light Head.
Bowens S-Type mount design facilitates most studio flash accessories, e.g. Flash Snoot, softboxes, reflectors, beauty dishes, umbrella, etc.

Check Stock

Neewer Professional Studio Flash Strobe Light Monolight - 400W GN.60 5600K with Modeling Lamp, Aluminum Alloy Construction for Indoor Studio Location Model Photography and Portrait Photography(S400N)

PERFECT DESIGN FOR PHOTOGRAPHY: Designed for professional photographers who need to take special effect of photo, perfect for Indoor Studio Location Model Photography and Portrait Photography.
DURABLE AND CONVENIENT: With high flash energy 400WS, Guide Number GN60, the light intensity is quite strong enough.
Made of aluminum alloy, durable and convenient to use in studio shooting.
HAS PRECISE OUTPUT DISPLAYED ON LED PANEL: 60 steps from 1.0 to 6.0 in 0.1 increments.
EASY TO MOUNT: Can be handheld or mounted on a light stand, what's more, it comes with an umbrella hole which can mount the soft umbrella.
can work as main light, back light or hair light, and form different kinds of layout lighting.
COMES WITH A LAMP: 150W modeling lamp adjusts in 3 power levels: Prop, Full, Off.
Work as fill light when not using the flash.

Check Stock

Camera Speedlite Mount Stand Flash Stand Bracket Umbrella Mount Holder Shoe Mount Compatible with Nikon Pentax Olympus Nissin Metz and Other Speedlite Flashes E Type-2 Pack

【CAMERA FLASH SPEEDLITE MOUNT】It can be applied to various flash,Compatible with Nikon, Pentax, Olympus, Yongnuo and many more speedlites.(Note:this adapter does not fit Sony and Minolta flash).
【FLEXIBLE POSITIONING】These flash mounts allow 180° vertical and 360° horizontal adjustment to position the umbrella and flash light in different angle.
【1/4" SOCKET AND 3/8" METAL HOTSHOE】1/4" socket and 3/8" metal hotshoe foot on the bottom can be attached on tripod or light stand or any camera accessories with 1/4"-20 or 3/8"-16 thread.
【CAMERA UMBRELLA HOLDER】There is a hole in this item so that you can insert a lighting umbrella and align it with the flash.
【STURDAY AND STABLE】 The camera umbrella bracket is made of aluminum alloy,durable and solid..

Check Stock

ChromLives 8'' Cold Shoe Extension Bar, Flash Straight Bracket, Camera Dual Mount Flash Bracket Compatible with Nikon Canon Sony Olympus DSLR Camera Camcorder DV

This tilt adapter can attach on your light stand, insert your photo umbrella and adjust your angle, insert your umbrella and adjust your mount, so it is at an optimum angle for getting great photographic results every time. It's a necessary gadget for portraits, interior and product photography..
Made of high quality nylon material, strong and durable..
It has teardrop shaped hole design and can lock your photo umbrellas..
Comes with a detachable 1/4 inch to 3/8 inch screw spigot, suitable for most LED lights, flash lights, and light stands..
180 degree adjustment supports any angle of lighting and umbrella.

Check Stock

Neewer [New Version] S101-300W Professional Studio Monolight Strobe Flash Light 300W 5600K with Modeling Lamp, Aluminium Alloy, Bowens Mount for Studio, Shooting, Product and Portrait Photography

...view the shot. An easy-to-read LCD display shows you the current light settings at a glance.
【Versatile Mounting】 Mount the studio strobe on a light stand (not included) or hold it in your hand to light from any angle. Bowens S-type mount works with various lighting tools from softboxes to beauty dishes, and the umbrella mount securely holds a lighting umbrella (not included) in place.

Check Stock

Flexzion Bicycle Umbrella Clamp Holder Mount Stand Handlebar Wheelchair Umbrella Universal Clamp Connector Frame Stroller Umbrella Attachment Quick Mount Dismount Adjustable Durable Length Tube Handle

... light weight, and last a long time. The handlebar holder has high resistance to chemicals and environmental factors such as corrosion, and is non-toxic, 100% safe to use.
Easy to Use and Install - Free your hands while riding your bike or going out. It gives you more focus on riding and increase your security. This umbrella mount stand has a innovative simple design. It allows easy installation and uninstall from handlebars without tools. Mount height is adjustable.
Universal Clamp Design - Adjustable strong clamp mounting system lets you install the umbrella holder onto not just bicycles .The angle of your umbrella can be adjusted by the mounting angle. One thing to add, if your umbrella handle is thinner than 20mm, it's recommended that you wrap the handle with rubber rings or thin self-adhesive rubber pads to increase thickness and firmness.
Multi-Functional - Our Umbrella clamp can be applied to items other than bikes and umbrellas. Easily attaches to the side of a wheelchair, a stroller, a walker, a camping chair, a deck chair or electric scooter by a simple base clamp (But please noted that the handlebar should be in round shape and between 0.6-1.4 in (15-35mm) in diameter).
Easy Carry & Storage - Weighing less than 0.5 lbs, it's portable to anywh....

Check Stock