Top Light Switches Remote Reviews

Eogifee UC7083T Ceiling Fan Remote Control Replacement of Hampton Bay with Dim Light,3 Speed Control with Wall Mount Only Remote

IT IS ONLY A TRANSMITTER. This package does not include a receiver or 12V" battery.If the indicator light stays on,which means your battery in low power status..
ADAPTED TO - Replace your original Hampton Bay UC7083T Remote..
FOR TWO LIGHT SYSTEMS - Up light and Down light but NO reverse..
3 SPEED - Fan button controls 3-speeds (high/medium/low). Please note that the receiver does not have the function of reverse. MAKE SURE you are using incandescent bulbs that light dimmer button can control the brightness. If your light is LED bulbs, just can control LED bulbs’ on/off..
CEILING FAN REMOTE CONTROL - Match the dip switches on the receiver which inside the ceiling fan. As long as the fan has the receiver (must have same dip switches too). This remote works with Hampton Bay and Harbor breeze Ceiling Fans. Just remember to set the 4 dip switches inside the battery compartment(They are hidden behind the slot for the battery itself)..

Check Stock

Suraielec 3 Way Wireless Light Switch, No Wiring, No WiFi, 100ft RF Range, Pre-Programmed, Expandable Wireless Wall Switch and Receiver Kit, Remote Control Light Fixture for Lamp, Ceiling Light, Fan

【 Create 3 Way Switches Easily without Wiring 】 Suraielec 3-way wireless light switch and receiver starter kit eliminate the wire from the light to the switch location.
no need to tear down a wall to gain access to the wires.
an easy and economical way to add 3-way light switches to your existing lighting system freely.
no in-wall wiring or WiFi or replacing lighting fixtures needed.
【 Simple Installation, Wall Switch Mounts Anywhere 】 Install the relay receiver simply by wiring it between the power and lamps.
small receiver fits easily in control boxes such as rose/canopy, electrical junction box, switch box, distribution box.
mounts the wall light switch anywhere with the included mounting bracket.
wireless switch can work as a portable remote which is particularly useful for the elderly or anyone with mobility challenges.
【 Use Multiple Sets in a Room without Interference 】 This wireless light switch kits use rolling/dynamic codes.
allow you to install multiple separate kits in the same house to work independently.
this remote control kit has been pre-programmed for immediate use.
rated at 10A/1250W and works with almost all kinds of lamps and bulbs.
【 Programmable and Expandable 】 This 3-way r....

Check Stock

GE CYNC Smart Remote, Dimmer Remote + White Tones Control, Bluetooth Enabled, Battery Powered (1 Pack), Packaging May Vary

Add remote control anywhere and upgrade your smart home: This remote includes a replaceable battery with a 2+ year life, so you can control your Cync or C by GE smart bulbs, switches, and plugs from anywhere in your home.
Magnetic back: You don't need a remote control holder for this smart remote. It comes with a magnetic back for easy storage on any metal surface so it can be within easy reach.
Control your Cync or C by GE devices with the remote control: Install Cync or C by GE smart bulbs, switches, and plugs in other fixtures, set them up in the Cync App, and control all of your devices from the remote via Bluetooth.
Dim and adjust white tones: Pair your remote with Cync or C by GE Tunable White or Full Color smart bulbs to set brightness and adjust whites from cool, refreshing to warm, cozy light from the remote.
Comfort and convenience with remote control: Smart lights, switches, and plugs can be conveniently controlled from your bed or couch with this wire-free remote. Now lighting control happens anywhere you are with the smart remote control.

Check Stock

Hampton Bay Williamson LED Ceiling Fan Light Kit

53T CEILING FAN REMOTE CONTROL KITS:3-Speed Remote Control,This package doesn't include 9V battery ..
MAKE SURE MODEL:Make sure the original remote control model is KUJCE9103FAN-11T , FAN-53T, FAN-HD5 or FAN-35T..
3 SPEED:Fan button controls 3-speeds (high/medium/low). Please note that the receiver does not have the function of reverse. Light dimmer button just controls the brightness of the incandescent lights. If your light is LED bulbs, just can control LED bulbs on/off..
4 DIPS TO SET : Look inside the old remote with the battery cover off. There is a series of "dip" switches(4) as picture shows. Use a pen, slide the switches in the new remote to match the same pattern as the original remote. Replace the battery in the new remote and things should work..
NOTES:If you have multiple ceiling fans in your home, please make sure that the PIN code settings are different between them, otherwise it is likely that the transmitter next door activates the ceiling fan in your bedroom. This will cause the ceiling fan to turn on strangely while you sleep..

Check Stock

Wave Decoration UC7083T Replacement Remote Control fit for Hampton Bay Harbor-Breeze Home Decorators Collection Ceiling Fan Remote with Fan Speed Buttons Hi/Med/Low Off White

UC7083T Wave Decoration Replacement Remote Control fit for Hampton Bay Harbor-Breeze Home Decorators Collection Ceiling Fan Remote with Fan Speed Buttons Hi Med Low Off White.
Compatible brands:Hampton-Bay, Harbor-Breeze, Home Decorators Collection.
3 SPEED - Fan button controls 3-speeds (high/medium/low). Please note that the receiver does not have the function of reverse. MAKE SURE you are using incandescent bulbs that light dimmer button can control the brightness. If your light is LED bulbs, just can control LED bulbs’ on/off..
FOR TWO LIGHT SYSTEMS - Up light and Down light but NO reverse..
Match the dip switches on the receiver which inside the ceiling fan. As long as the fan has the receiver (must have same dip switches too). This remote works with Hampton Bay and Harbor breeze Ceiling Fans. Just remember to set the 4 dip switches inside the battery compartment(They are hidden behind the slot for the battery itself)..

Check Stock

Power by Switchmate, Dual Outlet Timer/Automation, DIY, USB Charger, Nightlight, No Tools, No Wiring, Snap on, Alexa, Google Assistant, iOS, Android, Smart Home, App

Add voice control of lighting and appliances in seconds, Work with existing Rocker Switches.
POWER INCLUDES DUAL AUTOMATED POWER OUTLETS for Independent control of each outlet. Set timers for each plug or use the app for remote On & Off. Automation has never been this easy.
SWITCHMATE SNAPS OVER ROCKER STYLE LIGHT SWITCHES and ideal for homeowners, apartment dwellers, renters and students. Narrow design allows multiple units to be installed in multi-switch wall plates.
SWITCHMATE ADDS APP CONTROLLED TIMER and remote on/off to existing light switches and includes a built-in manual switch for easy control of lights at the wall panel.
Power Outlet Unit acts as WiFi bridge to your WiFi network. You add as many switches as you wish.

Check Stock

Suraielec Wireless Remote Light Switch, No Wiring, No WiFi, 100ft RF Range, Pre-Programmed, Expandable Wireless Wall Switch and Receiver Kit, Remote Control Light Fixture for Lamp, Ceiling Light, Fan

【 Relocate or Add Wall Switches Anywhere without Wiring 】 Suraielec simple wireless light switch and receiver starter kit eliminate the wire from the light to the switch location.
no need to tear down a wall to gain access to the wires.
an easy and economical way to remote control all your lights and not affect the existing system.
no in-wall wiring or WiFi or replacing lighting fixtures needed.
【 Simple Installation, Wall Switch Mounts Anywhere 】 Install the relay receiver simply by wiring it between the power and lamps.
small receiver fits easily in control boxes such as rose/canopy, electrical junction box, switch box, distribution box.
mounts the wall light switch anywhere with the included mounting bracket.
wireless switch can work as a portable remote which is particularly useful for the elderly or anyone with mobility challenges.
【 Use Multiple Sets in a Room without Interference 】 This wireless light switch kits use rolling/dynamic codes.
allow you to install multiple separate kits in the same house to work independently.
this remote control kit has been pre-programmed for immediate use.
rated at 10A/1250W and works with almost all kinds of lamps and bulbs.

Check Stock

Winflike UC7083T Replacement Remote Control fit for Hampton Bay Harbor-Breeze Ceiling Fan Wireless Remote Control Mount Without Reverse Function Black

Winflike New UC7083T Replacement Remote Control fit for Hampton Bay Harbor-Breeze Ceiling Fan Wireless Remote with Remote Control Mount Without....
Compatible brands:Hampton-Bay, Harbor-Breeze.
3 SPEED - Fan button controls 3-speeds (high/medium/low). Please note that the receiver does not have the function of reverse. MAKE SURE you are using....
FOR TWO LIGHT SYSTEMS - Up light and Down light but NO reverse..
Match the dip switches on the receiver which inside the ceiling fan. As long as the fan has the receiver (must have same dip switches too). This....

Check Stock

Harbor Breeze Lynstead 52-in Bronze LED Indoor Flush mount Ceiling Fan with Light Kit (5-Blade)

【 Easy Install 】 This transmitter compatible with FAN30R, FAN28R, FAN18R and UC7067FMRX receiver, and it has a LEARN key that allows it to match more type of receivers. Look the DIP Codes inside the old remote with the battery cover off, the DIP Switches hidden behind the slot for the battery as picture shows. Slide the switches in the new remote to match the same pattern as the original remote. Replace the battery in the new remote and things should work..
【 Package 】 Includes Remote Control *1, Wall Mount Holder *1, User Manual *1, Screws *2. This FAN-35T1 remote is NOT universal, and it use a 12V battery (NOT INCLUDE) for power supply..

Check Stock

Harbor Breeze Hydra 70 Inch Brushed Nickel Indoor Ceiling Fan with Light and Remote Control (8-Blade)

【 Easy Install 】 This transmitter compatible with FAN30R, FAN28R, FAN18R and UC7067FMRX receiver, and it has a LEARN key that allows it to match more type of receivers. Look the DIP Codes inside the old remote with the battery cover off, the DIP Switches hidden behind the slot for the battery as picture shows. Slide the switches in the new remote to match the same pattern as the original remote. Replace the battery in the new remote and things should work..
【 Package 】 Includes Remote Control *1, Wall Mount Holder *1, User Manual *1, Screws *2. This FAN-35T1 remote is NOT universal, and it use a 12V battery (NOT INCLUDE) for power supply..

Check Stock

39-inch Crystal Ceiling Fan Pull Chain, The Newly Upgraded Bling Ceiling Fan pulls is Suitable for Pendant Suncatcher, Table Lamps, Toilet Lights, Bathrooms, Home Decoration DIY (Various Shapes)

【ONLY TRANSMITTER】 Not a set. Just a handheld remote. No reciever!!! Replacement for the Original Remote of Hampton Bay UC7078T FAN-HD5 KUJCE9013 FAN-53T UC7030T 2AAZPFAN-53T KUJCE9103 FAN-11T K- HD5.
【 NOTE 】***Make sure that the original remote is the same as shown in the picture..
【DIP CODES SET】Check the old remote control and see the series Dip switches. Use a pen to slip the switch of the new remote control, match with the mode of the old one..
Only Replacement of Hampton Bay and Harbor Breeze FAN-53T, FAN-35T, L3HFAN35T, L3HFAN35T1, FAN-HD5, FAN-11T, KUJCE9103..
【ONLY REMOTE】ONLY REMOTE 2PCS ,No reciever. No reciever!!!.
*****Make sure your original remote the same as the picture shows.***DIMMER Light Buton..

Check Stock

Universal Ceiling Fan Remote Control Kit, Replacement of Harbor Breeze, Hunter, Hampton Bay, with Receiver, 3-Speed, Light Dimmer, for Model FAN-53T 2AAZPFAN-53T FAN-11T KUJCE9103 UC7030T

IT IS ONLY A TRANSMITTER. This package does not include a receiver or 12V "A23" battery. The original remote control model is FAN-35T、 FAN-53T、KUJCE9103、FAN-HD5、FAN-11T、L3HFAN35T1 or L3HFAN35T..
The Corebay remote have 5 buttons, 3-Speed(HI/MED/LOW) and OFF for fan speed control. Light dimmmer button controls the brightness of the light. Auto bulb detection. Suitable for incandescent and dimmable LED bulbs..
It has a LEARN key. Look the DIP Codes inside the old remote with the battery cover off, the DIP Switches hidden behind the slot for the battery as picture shows. Slide the switches in the new remote to match the same pattern as the original remote. Replace the battery in the new remote and things should work..
If you need a compatible standard receiver to match more receivers, please use a Corebay receiver..
The package Includes Remote Control *1, Wall Mount Holder *1, User Manual *1, Screws *2, Paper description*1..

Check Stock

Linear Multicode 3089 Compatible Visor Remote Opener

Order Linear Compatible 300MCD21V Visor remote if:.
Your opener is a Linear 300MHz Multicode with 10 dip switches on motor head.
To Program: match dip switches in remote to switches in your Linear Opener.
Remote includes: Battery, Visor Clip and Instructions.

Check Stock