Top Light Gauge Converter Foil Reviews

Handi-Foil 8 x 7 x1.3 Small Mini Toaster Oven Broiler Baking Pan pack of 10

  • Important! Be sure you're buying the correct size - this pan is 9" rim to rim, please read the dimensions below. Pack of 25 pans..
  • Top outside diameter (rim to rim): 8-7/8 Top inside diameter: 7-7/8 Bottom diameter: 6-1/4 Depth: 1-1/4 Capacity: 28 fluid oz 70 gauge aluminum foil.
  • You can load this pan up with filling, it will handle a lot. OU Kosher Certified, food grade safe..
  • Quality is very good, made in USA. Makes a nice dinner plate. Ideal for retro camping plates, Western theme parties..
  • Here's a nice pie pan - smooth wall, heavy gauge aluminum foil - thicker and heavier than regular foil pans. Reuseable with just a little care. Also....
Check Stock

Instrument Clinic Clarinet Pad Kit, with Instructions, for Bundy Clarinets

  • Quality, US-Made Double Skin Pads, Transparent.
  • Mini Leak Light, Key Wedges and Screwdriver.
Check Stock

Handi-Foil 9' Smooth-Wall Aluminum Pie Pan Plate Tin -Heavy Duty (Pack of 25)

  • Important! Be sure you’re buying the correct size – this pan is 9″ rim to rim, please read the dimensions below. Pack of 25 pans..
  • Top outside diameter (rim to rim): 8-7/8 Top inside diameter: 7-7/8 Bottom diameter: 6-1/4 Depth: 1-1/4 Capacity: 28 fluid oz 70 gauge aluminum foil.
  • You can load this pan up with filling, it will handle a lot. OU Kosher Certified, food grade safe..
  • Quality is very good, made in USA. Makes a nice dinner plate. Ideal for retro camping plates, Western theme parties..
  • Here’s a nice pie pan – smooth wall, heavy gauge aluminum foil – thicker and heavier than regular foil pans. Reuseable with just a little care. Also 100% Recyclable. Proudly Made in the USA with American sourced materials..
Check Stock

CURT 59236 Weather-Resistant Multi-Function Splice-in Trailer Tail Light Converter Kit, 4-Pin Wiring Harness

  • FULLY SEALED. This trailer light converter features an epoxy-filled, potted enclosure that seals off the electrical components from moisture and vibrations, promoting increased longevity.
  • HIGHLY VERSATILE. This multi-functional taillight converter can be used to convert 2-wire, 3-wire, PWM ST and PWM STT systems to standard 2-wire trailer wiring. It is also compatible with low-voltage operation as low as 7 volts.
  • PROTECTED. This multipurpose tail light converter is equipped with a microcontroller that senses current to rapidly respond to overload. It also offers improved short-circuit and thermal protection.
  • STANDARD OUTPUT. This tail light converter provides a standard 4-way flat socket to connect the taillights, brake lights and turn signals for towing.
  • READY TO INSTALL. This trailer light converter comes ready to install on your vehicle. It includes a wiring kit to establish a connection to the vehicle battery, as well as snap locks for secure connection of the wires. No heavy-duty flashers required.
Check Stock

CARROFIX 2-to-3-Wire Splice-in Trailer Taillight Converter - Custom Fit Tail Light Converter for RV Dinghy Towing

  • This taillight converter converts standard motor-home or camper taillight wiring (2-wire system) to towed vehicles with separate turn and stop lights (3-wire system).
  • This trailer electrical converter is designed to splice directly into the tail light wiring, rather than plug into various sockets, which offers a reliable, long-term connector solution.
  • For import and domestic vehicles requiring a 2-to-3-wire taillight converter to ensure proper towed vehicle light functions when tow vehicle has a different lighting system.
  • All solid state components in converter will not work with low-side switch or multiplex systems, cannot be reversed to convert a 3-wire tow vehicle to a 2-wire towed vehicle.
  • This trailer light converter cannot be installed backwards, meaning the input going to the output side to covert a tow vehicle down.
Check Stock

Blue Ox BX88206 Coiled Cable with Female Receptor

  • The Trailer conversion connection wire functions as a converter tool which fit all 2-wire vehicle electrical system to standard 3-wire trailer RV hitch pick up trucks. 2.1 amps signal circuit, 5.0 amps taillight circuit..
  • Our trailer tailight conventer model converts 2-wire system ( left and right turn/brake) to a 3 wire system (left and right turn, brake seperate) also fit some 4 wire to 5 wire trailer light system that allow to split brake and turn signals on pick up trucks into separate wires..
  • Noted: tailgate light/tail light function is not support in this converter so does not run though this converter. Truck can't tell the difference between blinker and brake light. Once you separate both of two, Since it reads AND signals, your additional blinkers won't flash with the hazard lights, but your brake lights will..
  • Easy install by yourself. Standard color code wire connection. Functions was mark on the converters for help you install simultaneously. The best is use a multimeter to ensure the input and output Voltage..
  • The trailer converter is a great tool for trailer to Splice turn signal / brake light ..
Check Stock

MTX TNP212D2 12' 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, 8 Gauge Amplifier Amp Complete Wiring Installation Kit and Hi/Low Converter

  • ...edium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

CURT 56130 Non-Powered 3-to-2-Wire Splice-in Trailer Tail Light Converter, 4-Pin Wiring Harness

  • RELIABLE POWER. This non-powered 3-to-2-wire taillight converter provides a dependable splice-in trailer wiring harness option, if a CURT custom trailer wiring harness is not available for your vehicle.
  • STANDARD OUTPUT. This tail light converter converts the 3-wire vehicle electrical system to standard 2-wire trailer wiring and provides a standard 4-way flat socket to connect the taillights, brake lights and turn signals for towing.
  • COLOR-CODED WIRES. To make installation faster and easier, this trailer wiring converter splices into your vehicle using color-coded wires (3.0 amps signal circuit, 5.0 amps taillight circuit).
  • READY TO INSTALL. This trailer light converter comes ready to install on your vehicle. It includes snap locks for secure connection of the wires, and it requires no heavy-duty flashers or direct battery connection.
  • WEATHER-RESISTANT. To help protect this trailer light converter from the elements, it comes with a rubber dust cover for the 4-pin wiring connector, shielding it from rain, dirt, dust and more when not in use.
Check Stock

KitchenDance 9-1/2 Rim to Rim Disposable Heavyweight Aluminum Foil Pie Pans #1070 500

  • IMPORTANT! This pan is 9½" rim to rim, please read the dimensions below. If you want to match a pan you have been using you will need to measure the....
  • Top outside diameter (rim to rim): 9½" Top inside diameter: 8¾" Bottom diameter: 6¾"Depth: 1⅜" Holds 36 fluid oz. 90 gauge aluminum foil.
  • Disposable or reusable, you can reuse this pan by hand washing and drying.
  • Made of 90 gauge aluminum foil, this pan can hold the heaviest of pies and can be reused several times over.
  • Also great for western themed BBQ plates and Rustic Weddings..
Check Stock

Schumacher FR01337 Rechargeable AGM Jump Starter for Gas Diesel Vehicles - 1200A with Air Compressor and 12V USB/AC Power Station to Charge Phones Accessories

  • MAX POWER: Delivers 1200 peak amps for strong jump start that works with 4–8 cylinders, including V8, 8.0L gas, and 6.0L diesel engines.
  • AIR COMPRESSOR: Includes a 100 PSI automatic digital air compressor with pressure gauge, nozzles for controlling flow and speed, and a storage area.
  • EASY TO USE: Sure-grip clamps fit both top- and side-mount batteries.
  • on/off rocker switches for light and air compressor.
  • MULTI-FACETED: Features 400 peak watt converter with 4 USB ports and an AC outlet.
  • WORKS AT NIGHT: A built-in LED flex light ensures you’re able to jump start your vehicle in dark conditions.
Check Stock

KitchenDance (9-1/2" Rim to Rim) Disposable Heavyweight Aluminum Foil Pie Pans #1070 (10)

  • IMPORTANT! This pan is 9½" rim to rim, please read the dimensions below. If you want to match a pan you have been using you will need to measure the pan you have been using..
  • Top outside diameter (rim to rim): 9½" Top inside diameter: 8¾" Bottom diameter: 6¾"Depth: 1⅜" Holds 36 fluid oz. 90 gauge aluminum foil.
  • Disposable or reusable, you can reuse this pan by hand washing and drying.
  • Made of 90 gauge aluminum foil, this pan can hold the heaviest of pies and can be reused several times over.
  • Also great for western themed BBQ plates and Rustic Weddings..
Check Stock

Waytiffer 9" Pie Pans (10pack) - Disposable Aluminum Foil Pie Tins,Heavy-duty, Baking Tin Plates, Standard Size

  • Bottom Diameter: 6-9/16" Vertical Depth: 1-1/4".
  • Pack of 10 Sets. Premium quality 9" aluminum foil pie pans with clear dome lids made with heavy 40 gauge aluminum foil . No more messy cleanups, 100% disposable and recyclable. Oven and freezer safe. Bake, serve, and discard/recycle. Sturdy pans, will not easily crush or buckle like cheap imports. Proudly made in the USA with American sourced raw material..
Check Stock

WANLUTECH TVI/CVI/AHD+CVBS to HDMI Converter,Full HD 4K 8MP/5MP/4MP/3MP/1080P/720P BNC to HDMI Converter Adapter for Monitor HDTV DVR

  • ✅【CVI/TVI/AHD+CVBS to HDMI】Our converter works with CVBS, AHD, CVI, TVI cameras( It converts security camera signals to HDMI monitor).HDMI output 1080P 60Fps, connect HDMI output cable, HD-LINK light, display yellow light.Long transmission distance (500-700 meters through coaxial cable).Different resolution, different transmission distance.It converts TVI CVI AHD CVBS BNC video signal to HDMI..
  • ✅【Auto Identify Input】WANLUTECH full hd 4k to hdmi converter is plug-and-play and can automatically identify 720P/1080P/3MP/4MP/5MP/8MP resolution, and has LED indicator to show what resolution the video input has detected..
  • ✅【HDMI Port & Power Port】WANLUTECH full HD 4k to HDMI converter has HDMI output port and DV 5V micro-USB port.The device uses 5V/1A power supply,and power indicator stays on after the converter is powered on..
  • ✅【75Ω/ HI-Z Switch】When the IN port of the converter is connected to the camera, and the OUT is not connected to the DVR, please set the impedance switch to 75Ω. When the IN port of the converter is connected to the camera and the OUT port is connected to the DVR, please set to HI-Z..
  • ✅【Compact Size & Easy to Install】The size of WANLUTECH CVI/TVI/AHD to HDMI converter is 109mm x 94mm x 25mm,the weight of c....
Check Stock