Top Leg Mounting Hardware Reviews

Acrylic Lucite Crystal Furniture Legs 17\ inch H for Chair by Alpha Furnishings 4PC (17\ Straight & Curve)

PREMIUM QUALITY: Acrylic furniture legs for chair, bench or cabinet. Sold as 4pc set!.
BEAUTIFULLY CRAFTED: 17"H solid tapered acrylic furniture legs, Back chair legs are curved 4pc set.
DIMENSIONS: Front chair legs: 2” to 1-1/4”, 1-1/4”x1-1/4" bottom, crown for mounting 2-3/8"Hx1”x1-7/8”.
EASY INSTALLATION: mounting hardware included, with bolts and washers.
HEAVY DUTY: Weight Capacity of approx. 150 lbs per leg.

Check Stock

LuckIn Window Air Conditioner Support Bracket, Universal for 10,000-24,000 BTU AC Units, Up to 165lbs, Adjustable Extender Leg & Megnetic Spirit Level

【Universal Design】 Adapt to most window units, designed for 10,000-24,000 BTU AC units. Fits for wall thickness from 4” to 15”, and window sill width from 1 1/2” to 12”.
【Heavy Duty Material】 Durable epoxy-coated steel with nice surface treatment provides the bracket a more durable life, withstand outside weather and supports up to 165 lbs.
【Adjustable Leg】 The unique design of the leg extender allows you to freely adjust the length of the support arm ( from 10 3/4” to 15 3/8” ) , which well adapted to the different outside wall, relieved weight stress on window frame.
【Pocket Spirit Level】 An extra spirit level with magnetic bottom to correct mounting position. Sturdy ABS plastic shell, mini design for easy carrying.
【What You Get】 Included an air conditioner bracket, a bubble spirit level, an installation manual and all mounting hardware. If there’s anything we can do for you, please feel free to contact us..

Check Stock

JEACENT AC Window Air Conditioner Support Bracket Heavy Duty, Up to 165 lbs

UNIVERSAL DESIGN – adapts to most window units (check description below for window requirements).
INDOOR INSTALLATION – easy breezy install, without exterior work, just drilling into window sill.
RELIEVES STRESS ON THE WINDOW – Transfers the stress and weight from the window sill and sash to the support and window frame for safety.
FITS WALL THICKNESS from 2″ to 15.2″, exclusive built-in bubble level to correct mounting slope position.
ALL NECESSARY HARDWARE INCLUDED and all weather construction. Note: If you found feet pad of the leg cannot justly face the wall.
please unlock it and turn it over, then fix it in the leg again.US Patent Pending. All Rights Reserved..

Check Stock

LuckIn Window Air Conditioner Support Bracket, Universal for 5,000-12,000 BTU AC Units, Up to 85lbs, Adjustable Extender Leg & Megnetic Spirit Level

【Universal Design】 Adapt to most window units, designed for 5,000 to 12,000 BTU AC units. Fits for wall thickness from 4” to 15”, and window sill width from 1 1/2” to 12”.
【Heavy Duty Material】 Durable epoxy-coated steel with nice surface treatment provides the bracket a more durable life, withstand outside weather and supports up to 85 lbs.
【Adjustable Leg】 The unique design of the leg extender allows you to freely adjust the length of the support arm ( from 8 1/2” to 13 3/4” ) , which well adapted to the different outside wall, relieved weight stress on window frame.
【Pocket Spirit Level】 An extra spirit level with magnetic bottom to correct mounting position. Sturdy ABS plastic shell, mini design for easy carrying.
【What You Get】 Included an air conditioner bracket, a bubble spirit level, an installation manual and all mounting hardware. If there’s anything we can do for you, please feel free to contact us..

Check Stock

Couch Legs 6 inch, Sofa Legs for Furniture Set of 4, Square Wood Furniture Legs Replacement for Furniture Feet,Coffee Table, Dresser, Cabinet, Bed,Mid Century Brown Color

②PROTECT YOUR FLOOR - We have installed a gasket on the bottom of each furniture leg to protect your hardwood floors without scratching and prevent noise, so you can save yourself the trouble of choosing and installing protective gaskets and leg mounting plates.
③EASY TO INSTALL - Each sofa legs 6 inch are attached with 5/16'' hanger bolt. 4 sets wood legs are packed with 4 mounting plates and 12 pcs screws,and Matching enough hardware and instruction are supplied for installation.NOTE: If you found original flanges can not match our legs bolt, please replace new flanges first,then roate and fix new legs into the flanges.
④MID-CENTURY LOOK - The furniture legs 6 inch are painted with walnut color, which is a classic color for most furniture leg style.
⑤PRACTICAL AND WIDE APPLICATIONS - The wooden table legs can update your old furniture's height, raise or reduce the furniture's height according to your need, bring a new look for your sofa and all furniture.

Check Stock

LuckIn Window Air Conditioner Support Bracket, Universal for 5,000-12,000 BTU AC Units, Up to 85lbs, Adjustable Extender Leg & Megnetic Spirit Level, 2-Pack

【Universal Design】 Adapt to most window units, designed for 5,000 to 12,000 BTU AC units. Fits for wall thickness from 4” to 15”, and window sill width from 1 1/2” to 12”.
【Heavy Duty Material】 Durable epoxy-coated steel with nice surface treatment provides the bracket a more durable life, withstand outside weather and supports up to 85 lbs.
【Adjustable Leg】 The unique design of the leg extender allows you to freely adjust the length of the support arm ( from 8 1/2” to 13 3/4” ) , which well adapted to the different outside wall, relieved weight stress on window frame.
【Pocket Spirit Level】 An extra spirit level with magnetic bottom to correct mounting position. Sturdy ABS plastic shell, mini design for easy carrying.
【What You Get】 Included 2 air conditioner brackets, 2 bubble spirit levels, an installation manual and all mounting hardware. If there’s anything we can do for you, please feel free to contact us..

Check Stock

TITAN 12V DC Double Rack Mount Ventilation Cooling Fan for Fridge Vent and Ventilation Grille with Speed Controller 120mm

Standard Universal RV Roof Vent (12 volt POWERED FAN) w/ White Wedge Style Lid Heng's Industries Part # 71112A.
ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your roof) 14 1/2” X 14 1/2.
12 VOLT Powered Fan - MANUAL CRANK HANDLE to open lid - MESH SCREEN.
1" Inner Garnish / Trim Ring Heng's Part #90090 - 1" Vertical Leg (How far up into your ceiling it goes) 1 ¼” Wide Mounting Flange (trim you see inside on the roof).
EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 16 1/2” X 16 1/2” - NO MOUNTING HARDWARE you must provide caulk/putty and screws ****WARNING All Vent Metal Flanges are VERY SHARP use caution when touching WARNING ****.

Check Stock

Orgerphy 8 Inch Solid Wood Furniture Legs 4pcs | Round Tapered Straight Replacement Legs for Furniture| Mid Century Modern Wooden Legs Desk Legs Furniture Legs for DIYers | Screws & Pads ( Walnut)

☆ MATERIAL☆：The 8” wood furniture legs are made of premium quality solid wood, to make sure its sturdier and more durable, Finished with wine-red make it artistic, and it will support up to 500 lbs. The legs are smooth and comfortable to the touch.
☆ PACKAGE INCLUDE☆：4 x round tapered wood table legs, 4 x mounting plate, 4 x pads, 8 x Screws. All hardware is included as you see in the pictures.
☆ EASY TO INSTALL☆：Each wood leg is equipped with a mounting plate, come with 4 big screws and 4 small screws, and 3.14” wide mounting plate for supporting more weight and ensure steadily.
☆ MULTIPURPOSE☆：The wood furniture legs can greatly meet the need of DIYers, it can be used in sofa, cabinets, bench, coffee table, end table, TV stand, night stand, durable and smooth provide a high-quality life to you.
☆ IMPROVEMENT☆: Round cone shape and straight designed provide new style for your furniture, it comes with 8 screws, which you can install when you receive the goods, instead of buying extra screws at you local hardware store..

Check Stock

Orgerphy 8 Inch Solid Wood Furniture Legs 4pcs | Round Tapered Oblique Replacement Legs for Furniture| Mid Century Modern Wooden Legs Desk Legs Furniture Legs for DIYers | Screws & Pads ( Wine- Red)

☆ MATERIAL☆：The 8” wooden furniture legs are made of premium quality solid wood, to make sure its sturdier and more durable, Finished with wine-red make it artistic, and it will support up to 500 lbs. The legs are smooth and comfortable to the touch.
☆ PACKAGE INCLUDE☆：4 x round tapered wood table legs, 4 x mounting plate, 4 x pads, 8 x Screws. All hardware is included as you see in the pictures.
☆ EASY TO INSTALL☆：Each wood leg is equipped with a mounting plate, come with 4 big screws and 4 small screws, and 3.14” wide mounting plate for supporting more weight and ensure steadily.
☆ MULTIPURPOSE☆：The wood furniture legs can greatly meet the need of DIYers, it can be used in sofa, cabinets, bench, coffee table, end table, TV stand, night stand, durable and smooth provide a high-quality life to you.
☆ IMPROVEMENT☆: Round cone shape and oblique designed provide new style for your furniture, it comes with 8 screws, which you can install when you receive the goods, instead of buying extra screws at you local hardware store..

Check Stock

Fulton 141401 XLT Powered Trailer Jack, Rating 2,500 lbs.

Features a patented spring-loaded drop leg pull-pin design that position quickly with 22 inch total travel.
Sharkskin premium finish for optimal corrosion resistance and corrosion resistant stainless steel internal ACME screw.
Manual override using standard tools in case of power loss.
Easy to install - simply bolt to frame and hook up wiring.
Includes mounting hardware for up to 5 inch high trailer tongues.

Check Stock

ButtKicker BK-CMAK Couch/Chair Mounting Accessory Kit

Easy-to-use kit simplifies installation of your ButtKicker LFE.
Allows ButtKicker LFE to be placed simply and securely on whatever furniture you are going to be using.
Attaches directly to the leg of your couch or chair, while sitting on rubber isolators.
Includes five additional rubber isolators, drastically improving the performance of your ButtKicker LFE.
Kit comes with all the necessary mounting hardware, and a handy wrench.

Check Stock

Quluxe Table Legs, 6 Inch Wood Furniture Legs for Coffee Table End Table, Modern DIY Furniture Tapered Feet- Brown (Pack of 4)

✅Size: 48 x 48 x 155 mm/1.88 x 1.88 x 6.1 inches(L x W x H).
✅Material: Made of solid wooden, with beautiful appearance and fine workmanship, strong and durable..
✅DIY Furniture Project: The 6" high tapered wood legs work great on end table, chairs and benches. Raise your short bedside table to the right height..
✅Easy to Install: Each wood leg is attached with mounting screws. Replace the old furniture leg is easy with correct hardware..
✅Application: Widely used in bed, bench, end table, coffee table, wardrobe, night stand, cabinet, dresser, office furniture and etc..

Check Stock

Kuryakyn 7159 Motorcycle Accessory: Multi-Rack Adjustable Trunk Luggage/Storage Rack with Corner Loops, Universal Fit for Tour Trunk Motorcycles, Chrome

Designed to fit virtually any motorcycle tour trunk, flat or curved.
Features adjustable mounting stand-offs and built-in corner loops to keep luggage secure.
Use of any common flag holder allowed with 1/2" tubular design.
Installation to trunk lids with a steep downward rear swoop or spoiler is made possible with a pair of mounting extensions.
Includes (1) chrome multi-rack, (1) mounting leg kit, (1) clamp kit, (1) foot kit, and (1) hardware kit.
Suggested for installation (not included): set of hex wrenches, drill and drill bit set, center punch, masking tape, and a non-permanent marker.
Universal fit for installing on a tour trunk with rigid top (requires 6" x 13" mounting area).
Compatible with Honda Gold Wing models: GL1800 and 1500 (excludes F6B) and Trikes | Harley-Davidson models: Touring and Trike with King, Ultra, Chopped or Razor Tour-Paks | Kawasaki models: Voyager | Victory models: Cross Country, Cross Country Tour, Magnum and Hard-Ball equipped with Tour Trunks (excludes Vision) | Yamaha models: Venture.

Check Stock