Top Led Strip Module Reviews

100Ft Extremely Bright LED Modules Window Lights White Storefront Light Outdoor 3-LED 200Pcs 12v Adhesive Waterproof Strip Lights for Letter Signs, 40-45lm Per LED

  • Shell material: PVC plastic. Light source: 5630 5730. LED quantity: 3 x 20Pcs x 10strings. Voltage: DC 12V. Power: 1.44W. Lighting color: white light. Light source life: 50000h. Length: 6.8 cm/2.68 inch. Module Width: 1.4 cm/0.55 inch.Wire Length: 7.8 cm/3.07 inches (excluding terminal). Total Length: 3003 cm (100 feet)..
  • WHY CHOOSE BEAMNOVA LAMP BEADS - Lower power consumption, longer service life, higher brightness and produces less heat radiation. Also, they have strong controllability, easy to achieve color and brightness changes, and rapid to respond. Each LED Module has 3 LED beads..
  • USED INDOOR OR OUTDOOR - With fully enclosed PVC shells, BEAMNOVA IP68 waterproof LED light strips can work in -20~60℃. Widely installed as home decor, indoor window lights, or for outside commercial letter signs. Suitable for 12V DC input voltage..
  • EXTREMELY BRIGHT & USER-FRIENDLY - 3pcs 5730 LEDs with lens per module, 40-45LM Per led. With self-adhesive tape on each LED strip back. Just peel and stick..
  • DIY AVAILABLE - You can cut the LED strips to the actual length you need for lightbox, storefront light, LOGO sign, letter light, or holiday vibe decor..
Check Stock

GPIO Status LED Terminal Block Breakout Board for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • GPIO status LED and power 5V / 3.3V indication..
  • GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
  • Support for Raspberry Pi A+, 3A+, B+, 2B, 3B, 3B+, 4B.
  • Terminal block pitch 3.5mm, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm..
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi module).
Check Stock

Yolu RGB LED Knight Rider Scanner Light Strip 22'' 48-SMD Multicolored LED Flash Strobe Grille Light Car Truck Interior Exterior Lighting

  • 1 set of remote control RGB LED knight rider flashing light strip kit with 7 kinds of color and 130 distinct flash patterns, for car interior and exterior decoration..
  • 7 colors for option, Red (R), Green (G), Blue (B), Yellow (G+R), Magenta (R+B), Cyan (B+G), White (R+G+B)..
  • 130 Distinct flashing patterns.Flashing color and speed adjustable.
  • This LED scanner light bar can be commonly used on vehicles under hood, front grille, tailgate, trunk, cargo area, under spoiler, etc...
  • Package includes: 1x 48-SMD RGB type LED strip, 1x control module and 1x wireless remote control.
Check Stock

Electronics-Salon Screw Terminal Block Breakout Module, for Arduino MEGA-2560 R3.

  • Terminal Block Breakout Module - for Arduino MEGA-2560 R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header..
  • FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Mega module.
Check Stock

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock

PLUSPOE LED Light Strip 50W Dimmable Driver(4.15A),Magnetic,110V AC to 12V DC Transformer,Low Voltage Power Supply,Compatible with Lutron and Leviton dimmer, for Kitchens, Cabinets, Bedrooms and More

  • Quiet, Smooth, Full range flicker-free dimming for 12 volt LED Lighting such as LED strips, modules, light bars, puck and other LED accent lights.
  • Converts 110V AC to 12V DC while remaining compatible with standard TRIAC wall dimmers (including Lutron, Leviton, and most other standard household wall dimmers). Compatible with forward and reverse phase dimmers..
  • Easy to install, mount, and wire. Included AC and DC cords can be removed for use in hard wire installations..
  • Comes with 4.5 foot AC cord and 3.5 foot DC cord (both are detachable). DC cord has 5.5x2.1mm DC connector for use with most LED strip lights..
  • Compatible with 12v LED Strip light, LED puck light, module light or many other 12v LED lights.
Check Stock

DC 12V LED Power Supply Driver Transformer - Lustaled 15W Waterproof IP67 120VAC to 12V DC Converter Constant Voltage LED Switching Power Supply for LED Strip Lights, G4 MR11 MR16 LED Display (2-Pack)

  • [DC 12V LED Power Supply]: Mini size 15W LED driver transformer, Input: AC100-265V, Output: DC 12V.
  • [Wide Application]: Our 15W LED power supply driver is suitable for most of devices with DC12V such as CCTV, Illuminated Module Signboard, Cabinet Lights, LED Strip Lights, LED Display, LED Module, Indoor/Outdoor Deck Lights, Indoor Stair Step Lights, LED Light Bulbs like G4, MR11, MR16 LED bulbs..
  • [Good Heat Dissipation]: LED 12V transformer is made of aluminum, easy for heat dissipation and ensure stability. 100% Waterproof IP67 protect for outdoor use.
  • [Safer Design]: This DC 12V LED driver is flicker-free output, thermal overload, over current, over voltage and short circuit protection built in.
  • [Note]: Please confirm whether the input voltage (AC100-265V) can work in your place before purchase the 12V switching converter, please make sure the power is lower than or equal to the rated power supply, otherwise it may burn..
Check Stock

30 Channel DMX decoder 512 RGB LED Strip Controller DMX dimmer DC9V-24V 2A/CH

  • 2A each channel max 60A , Maximum power load: 720W (12V) 1440W (24V).
  • RGB 30 Channel,8 group, use for LED strip,LED module,LED light.
  • 100% SATISFACTION SERVICE - No matter what reason cause dissatisfaction, we’ll send replacement or reimburse you back!.
Check Stock

NSKANQI RGB LED Knight Rider Scanner Light Strip 22'' 48-SMD Multicolored LED Flash Strobe Grille Light Car Truck Interior Exterior Lighting (Knight Rider Scanner Light Strip)

  • 1.1 set of remote control RGB LED knight rider flashing light strip kit with 7 kinds of color and 130 distinct flash patterns, for car interior and exterior decoration..
  • 2.7 colors for option, Red (R), Green (G), Blue (B), Yellow (G+R), Magenta (R+B), Cyan (B+G), White (R+G+B)..
  • 3.130 Distinct flashing patterns.Flashing color and speed adjustable.
  • 4.This LED scanner light bar can be commonly used on vehicles under hood, front grille, tailgate, trunk, cargo area, under spoiler, etc...
  • 5.Package includes: 1x 48-SMD RGB type LED strip, 1x control module and 1x wireless remote control.
Check Stock

Set 7-Color 48-SMD Scanning LED 22" Knight Rider Strip Light Turn Signal Car Truck Interior Lighting Decoration Compatible with Chevrolet Ford Toyota GMC Dodge Jeep Honda Nissan Lexus

  • Manufacturer Warranty is Valid for Purchasing from Astra Depot ONLY.
  • 1 piece 22 inches long super bright 48 RGB type SMD LED strip.
  • Package includes: Package Includes: 1 piece 22 inches Long Super Bright 48 SMD RGB type LED Strip.
  • 1 Piece Wireless Remote Control (60 ft Range). *Note: color of the remote control is randomly printed.
Check Stock

iJDMTOY (1) 12V Wired Control Module w/ Solid, Strobe and Flash Features Compatible With Car, Boat, Household LED Strip or LED Bulb

  • Solid light up function (LIGHT), (4) Strobe flashing patterns (MODE), Flashing speed control (SPEED/BRIGHT).
  • Simply tap the LED (+/-) side to LED strip or any LED lights and then tap the 12V (+/-) side to 12V power.
  • Module Box Size: 1.75" (L) x 0.50" (W) x 0.15" (H).
Check Stock

LEDUPDATES Inline Touch Switch, Dimmer, on/Off Switch, Touch Control Dim Switch for LED Light Strip Module Showcase Light add on to 12v 24v Power Supply

  • compatible with LED Strip light, LED module light, LED under cabinet light and puck light.
  • Support 12v or 24v LED Light. support up to 72w max.
  • Touch and hold to dim, tap to turn on/off.
  • female 5.5mmx 2.1mm input and 5.5mm x 2.1mm output plug.
Check Stock

SYLVANIA Smart ZigBee Flex Expansion Lightstrips RGBW Full Color and Tunable White Works with SmartThings Wink and Amazon Echo Plus Hub Needed for Alexa / Google Assistant - 1 Pack

  • Flex Strip Expansion: Expansion strips will work with both ZigBee and Bluetooth indoor full color flexible lightstrip starter kits. Control module and....
  • Expandable Up to 20 Feet: Contains 2 2-foot indoor flexible lightstrips with adhesive backing for easy installation. Expand your strip of led lights....
  • Individual Light Atmosphere RGBW LED: Choose from over 16 million available colors and adjustable white color temperature ranging from soft white to....
  • The OSRAM lightify gateway is not required when using a different compatible ZigBee hub. ZigBee smart lights will not pair directly to voice control....
  • Please be advised of our new name and packaging design. The product packaging you receive may vary and you may receive a product labeled as either....
Check Stock