Top Led Status Reviews

Canon TS5320 All In One Wireless Printer, Scanner, Copier with AirPrint, Black, Amazon Dash Replenishment Ready

  • With a 1.44 inch OLED display & LED status bar easily navigate and view your printer status.
  • The OLED display displays deep, accurate color and the LED status bar provides simple printer status information: Even from across the room.
  • The Pixma TS5320 has a compact & stylish design that fits your space and personality.
  • Not only is it small, but it comes in 4 distinct colors.
  • Designed for ease of use and simple replacement, the Pixma TS5320 only needs 2 fine cartridges for great print quality.
  • Enjoy sharp text documents and great looking photos thanks to its hybrid ink system.
  • With Air Print, easily print from your iPhone, iPad, and Mac without additional apps.
  • (4) Air Print allows you to wirelessly print photos and documents without the need to install other software or drivers: For fast, convenient printing anywhere.
Check Stock

Canon Pixma TS6320 Wireless All-In-One Photo Printer with Copier, Scanner and Mobile Printing, Black, Amazon Dash Replenishment

  • With a 1.44” OLED display and LED status bar easily navigate and view your printer status. The OLED display displays deep, accurate color and the LED status bar provides simple printer status information – even from across the room.
  • A five individual ink system allows you to print sharp Black text documents and vivid color photos, and when an ink tank runs out you only need replace that specific ink tank compared to a partially used tri-color cartridge.
  • With an auto expandable output tray, this printer is made for smartphone & tablet printing. Even when the printer is powered down – simply press print and the Pixma TS6320 will power on and output tray automatically extend ready to ‘catch’ your prints..
  • Save 10 percentage on all ink reorders with Dash Replenishment.
  • Upon activation your printer measures ink levels and places smart reorders when you are running low.
Check Stock

REXQualis RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
Check Stock

Honeywell 5808W3 Wireless Photoelectric Smoke/Heat Detector

  • Improved Robust RF Field Strength: The distance between the detector and receiver has been significantly increased without the need for a repeater.
  • Smart Check: A signal is sent to the control panel when the detector requires cleaning. This allows a regular nonemergency service call to clean the detector before it goes into alarm..
  • Approved UL Listings for Residential and Commercial Applications: Both residential and commercial installation requirements are met.
  • Additional LED Status Indicators: Identifying between alarm or trouble conditions is a snap with green and red LED status indicators. A green LED denotes a normal condition while the red LED indicates abnormal conditions..
  • Easy to install Mounting Base: The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports which accommodate drywall anchors for easy surface mounting..
Check Stock

CONNYAM Fast Charging Station Compatible with PS5 Controller, Dual Controller Charger Stand Dock Replacement for Sony Playstation 5 Wireless Controller with LED Indicators

  • 【Specially designed】Designed for Playstation 5, this controller charger is compatible with PS5 Controller..
  • 【Efficient charging】This charger provides a quick and easy way to charge and store your PlayStation 5 Controller. It will take approx 2.5 hours to charge a controller, and two controllers can be fully charged simultaneously in 3 hours. (Charge time will vary depending on power source).
  • 【LED status indicators】No need to guess the battery charge, the LED status indicators let you know when the batteries are fully charged, green light status means the PS5 controller has been charged completed, Red light status means charging is in progress..
  • 【Intelligent protection 】Built-in intelligent charging protocols make sure your controller is never overcharged, damaging the battery life..
  • 【Best customer service】The product is made of ABS hard plastic material and has a long service life. But if you have any dissatisfaction, please contact us in time, we will provide you with quality service..
Check Stock

POTEK Car Jump Starter with 150 PSI Tire Inflator/Air Compressor,1000 Peak/500 Instant Amps with USB Port to Charge iPhone ,IPad, Kindle

  • [HIGH PERFORMANCE] POTEK 1000 Peak/500 Instant Amps Car Jump Starter, an emergency life saver when you are out,perfect for long driving, camping, biking..
  • [AIR STATION TIRE INFLATOR] The 150PSI air compressor takes 6~8 minutes to inflate a regular car tire to 30 PSI. Suitable for bicycle,car, balls and Other Inflatables.
  • [USEFUL FOR CHARGING DEVICES]With the USB port,you can charge your iphone,kindle or pad,what’s more,you can charge any 12V appliance like inverter, vaccum or mini fridge with the 12 volt power outlet sockets..
  • [TWO WAYS FOR CHARGING]Equipped with 12 Volt lead acid Battery,not only can charge with AC adapter at home but also can charge it with DC adapter in your car..
  • [LED INDICATOR] Know your battery status from the indicator,The red charging status LED light will illuminate to indicate the unit is charging. The battery status indicator will illuminate red-yellow-green- green respectively when the unit is fully charged.Charging current will automatically go to floating charge(maintaining status)..
Check Stock

Yuasa YUA1AMPCH 12V 1-Amp Battery Charger 50 State Compliant

  • Easy-to-use — just plug in and attach to battery. 3 color LED displays your charge status at a glance. Automatically switches to maintenance mode....
  • Easy-to-use — just plug in and attach to battery.
  • 3 color LED displays your charge status at a glance.
  • Automatically switches to maintenance mode after battery reaches peak voltage.
  • 3 stage charge cycle designed to prevent overcharging.
Check Stock

GPIO Status LED Terminal Block Breakout Board for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • GPIO status LED and power 5V / 3.3V indication..
  • GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
  • Support for Raspberry Pi A+, 3A+, B+, 2B, 3B, 3B+, 4B.
  • Terminal block pitch 3.5mm, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm..
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi module).
Check Stock

MakerFocus Raspberry Pi 4 GPIO Expansion Board Breakout GPIO Screw Terminal Hat Compatible with Raspberry Pi 4b 3b+ 3b 2b b+ Raspberry Pi Zero and Zero W

  • User manual: Please get the link from the product description below.
  • Easy to Assemble - This is a very beautiful screw terminal expansion version, which is expanded for the pins of the Raspberry Pi. Our raspberry pi hat is convenient for everyone to connect when doing electronic experiments..
  • Observe GPIO Status - The status information of the pin is displayed. When the GPIO pin is operated and effective in the terminal, the LED matrix on the right side of the terminal will display the status of the GPIO pin, and some distinctions are made in the color selection of the LED lights..
  • Fine Terminal Pinout - There is the pin out information of the GPIO pin on the top of the terminal and on the side..
  • Different Color LED Indicators - For example, the 5V power light is red, while the 3.3V power light is pink, the light of the special function pin is dark blue, and the indicator light of the ordinary GPIO pin is light blue.
Check Stock

Souyos Red Hunting Flashlight,350 Yard Zoomable Predator Varmint Coyote Hog Hunting Light,Red Led Light Flashlight with Scope Mount,Pressure Switch

  • RED LED FLASHLIGHT:Single mode with 350 yard tactical red led flashlight,XML-T6 LED bulb,not red filter flashlight or red lens flashlight,4 hours working time,suitable for hunting predator,varmint,coyote,fox,hog,fishing,night version,night observation,astronomy.
  • ZOOMABLE RED HUNTING FLASHLIGHT:Zoom in&zoom out status can be adjusted based on your needs for large area &long distance,the regular status is floodlight, stretching flashlight can make light became spotlight,adjustable focus help you find prey,aim and observation target clearly and security without disturbing them.
  • REMOTE PRESSURE SWITCH&SCOPE MOUNT:Momentary on pressure switch and On/Off push button switch, Push the pressure switch or press the on/off button switch to transfer on/off status,Standard 20mm Weaver Picatinny Rail Mount, Medium Profile Rifle scope rings to fit 1 inch / 25mm scope body / tube diameter.
  • POWER SOURCE:Operated by 3*AAA batteries(included) or 1*18650 battery(not included),18650 battery operates red light is brighter than 3 AAA batteries.
  • 10.FLASHLIGHT KIT:1*carrying package box,1*red light flashlight,3*AAA batteries,1*remote pressure switch,1*scope mount.1*AAA battery holder,1*18650 battery tube.
Check Stock

Gioteck EX03 Bluetooth Headset for PS3

  • Next Gen Chipset: Using the latest Bluetooth Next Gen Chipset featuring noise cancelling and superior enhanced voice clarity.
  • Pairing/charge LED indication: Visual indication of pairing & charge status through the use of a breathing LED. Also easy view status for power mode on/o.
  • Flexible earhooks & microphone: Comfortable, flexible earhooks & microphone, just adjust your headset for a comfortable fit.
  • Voice & game at your fingertips: The EX-03's game/voice balance control allows you to tailor how much voice you want to hear relative to the game's sound effects..
  • Sound chamber: Large sound chamber for a fuller sound.
Check Stock

Printer s Devil Tri-color Stripe

  • With a 1.44” OLED display & LED status bar easily navigate and view your printer status. The OLED display displays deep, accurate color and the LED....
  • The PIXMA TS5320 has a compact & stylish design that fits your space and personality. Not only is it small, but it comes in 4 distinct colors.
  • Designed for ease of use and simple replacement, the PIXMA TS5320 only needs 2 fine cartridges for great print quality. Enjoy Sharp text documents and....
  • With Air Print, easily print from your iPhone, iPad, and Mac without additional apps.(4) Air Print allows you to wirelessly print photos and documents....
Check Stock

P46 Digital Cute Cartoon Pokemon Power Bank Cute Portable Charger 10000mAh Dual USB Output Battery Pack for All Cellphones

  • It has two USB output ports allowing two mobile devices to charge simultaneously.
  • Supports Apple/iOs and Android mobile devices.
  • With LED indicators displaying the battery percentage and charging status.
Check Stock