Top Led Driver Module Reviews

Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control

BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory..
When you use it for Raspberry Pi, there is no driver needed but you need to install software.
The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place..
Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click “Ask a question” to em-ail us.

Check Stock

LED Driver 100 Watts 24V DC Low Voltage Transformer， Waterproof IP67 LED Power Supply, Adapter with 3-Prong Plug 3.3 Feet Cable for Any 24V DC led Lights, Computer Project, Outdoor Light

LOW VOLTAGE TRANSFORMER: LED Driver Power Supply 12V, 36 Watt, Input: AC100-240V, Output: DC 12V, Size: 4.92*1.38*0.91 inches, IP20 Waterproof..
GOOD HEAT DISSPATION: The Constant Voltage LED Driver is made of heat-resistant material and it also has overheating protection device inside. Easy for heat dissipation and ensure stability..
SAFER DESIGN: 120V to 12V Transformer is flicker-free output, thermal overload, over current, over voltage and short circuit protection built in. No noise isolation protection safety..
WIDE APPLICATION: 36W LED Driver can be applied to all kinds of LED devices, such as LED light strips, LED hard light strips, cabinet light, LED display, security camera, LED module, indoor LED deck light, puck light, rigid strip light, G4 bulb, MR11 bulb, MR16 bulb ect..
NOTE: Please confirm the input voltage (AC100-240V) can work in your place before purchase the 12V LED Switching Power Supply, and please make sure the power is not over 36W, otherwise it may burn..

Check Stock

AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino

4 LED lights (LED indicator to know the importance of doing in the actual project, with this indicator can work directly with the program status indicators for easy debugging..
AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino.
Four digital (using 74HC595 driver provincial IO learning SPI), you can do digital display test (can display temperature, voltage, counter value, etc.)..
Expansion board directly connected with LD3320 non-specific voice recognition module, you can achieve voice control..
Expansion board directly with the SG90, MG945 MG995 and other steering gear connected to achieve the robot and other complex actions..
Expansion board directly with the SYN6288 free voice module docking,it can achieve voice broadcast function..

Check Stock

WAC Lighting PL-LED14-27-PN 14in Polished Hemmingway LED Picture Light, Small, Polishied Nickel

Chronophoton Technology preserves artwork while providing vibrant color rendering..
Head rotates 90° up or down and extends out 14 1/2" from mounting surface..
Available in Hardwired or Portable. For portable models, 8 foot cord & plug with 18 inch wire cover in matching finish included..
Smooth and continuous dimming to 10% with an electronic low voltage (ELV) dimmer..
Replaceable LED module, Color Temp: 2700K, CRI: 90, Dimming : 100% - 10%, Rated Life : 70,000 hours..
14.0625IN long x 5.125IN high x 14.5IN extension (maximum).
Includes 9.4W 120V 2700K replaceable LED module.
Hardwired installation, no remote driver required.

Check Stock

WAC Lighting PL-LED14-27-BB 14in Burnished Hemmingway LED Picture Light, Small, Brushed Brass

Chrono photon technology preserves artwork while providing vibrant Color rendering.
Head rotates 90° up or down and extends out 14 1/2 inch from mounting surface.
Available in hardwired or portable. For portable models, 8 foot cord & plug with 18 inch wire cover in matching finish included.
Smooth and continuous dimming to 10% with an electronic low Voltage (elv) dimmer.
Replaceable LED module, Color Temp: 2700K, CRI: 90, dimming: 100% - 10%, rated life: 70, 000 hours.
14.0625IN long x 5.125IN high x 14.5IN extension (maximum).
Includes 9.4W 120V 2700K replaceable LED module.
Hardwired installation, no remote driver required.

Check Stock

2PCS LED COB Chip 50W 110V White Light Engine Integrated Smart IC Driver for floodlight

This LED COB chip Integrated Smart IC Driver the new technology, the chip built-in the led driver in to the lamp module, people do not need additional....
Do not need power supply,connect 110V AC directly,Suiteable for DIY.
Widely used in Traffic lighting, Landscape lighting, advertising lighting, Indoor Lighting, Special lighting,Landscape scene / spot....
Power:50W ,Voltage:AC 80-150V (No need power supply ),Color Temperature:6000-6500K,Lumen:4000LM.
Remark: It must need a heatsink aluminum for cooling, do not light it without heatsink aluminum. Otherwise the chip will Burn.

Check Stock

Getting Started with the micro:bit: Coding and Making with the BBC's Open Development Board (Make)

Specially designed for Microbit board. This kit includes a keyestudio sensor shield fully compatible with micro bit and other commonly used 37 kinds of sensor modules. It's compatible with both microbit v1.5 and v2, microbit board not include!.
Designed to learn electronics programming. Great hands on STEM kit to get started with the micro bit. The product needs to be debugged before use, such as an LED display module. Please use an external power supply and debug the backlight brightness..
The kit gives 37 kinds of common sensors, such as Digital LED Module, Analog Temperature Sensor, Photocell Sensor, Ultrasonic Module etc, allow you make a lot of interesting projects like Traffic Light, Magnetic Check, Temperature Test, Joystick Test, Photo-interrupter Test, Alcohol Detection and so on..
We have detailed tutorial( included introduction, wiring diagram, test code, driver installation, Example Projects...... Step by step to explain how to use on our wiki page..
Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..

Check Stock

DC DC Buck Boost Converter Variable Voltage Regulator CC CV 0.5-30V 4A 5V 6V 12V 24V Power Module Adjustable Voltage Regulated Laboratory Power Supply

output voltage range is DC 0.5-30V, can be arbitrary adjustable.
output current can be 3A for long term use, if enhance heat dissipation, it can reach 4A.
max output power is 35W, if enhance dissipation, it can reach 50W.
LCD displays input/output voltage, output current/output power/output capacity/output time.The module can be set to ON/OFF by default.
Safe Protection: the module is with Anti-reverse connection protection of input end, so that it will not burn out when there is reverse connection.Anti-backflow protection at the output end. No need to add anti-backflow diode when charging. Multiple software protection mechanisms are available, and the protection threshold is adjustable. When the working parameters of the module exceed the protection threshold, the output will be automatically turned off.
Application: the volt conversion board can be used as an ordinary buck/Boost module with over-current protection.
used as a high-power LED constant current driver module.
DIY a solar power controller, Battery Charging.
Output ripple is small and πfilter is available.Thick heat sink .Buck-boost Integrated.

Check Stock

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

Stepper motor with a standard interface..
A, B, C, D four-phase LED indicates the status of the stepper motor work..
Drive Module Board Size(in): 1.37*1.18*0.6.
5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board，With convenient use, direct docking.
Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).

Check Stock

KEYESTUDIO 37 Sensors in 1 Box Starter Kit for BBC Micro bit with Tutorial (Without Microbit Board), Compatible with V1.5, V2 Microbit Sensor Kit Accessories Programming Gift for Kids Adults

Specially designed for Microbit board. This kit includes a keyestudio sensor shield fully compatible with micro bit and other commonly used 37 kinds of sensor modules. It's compatible with both microbit v1.5 and v2, microbit board not include!.
Designed to learn electronics programming. Great hands on STEM kit to get started with the micro bit. The product needs to be debugged before use, such as an LED display module. Please use an external power supply and debug the backlight brightness..
The kit gives 37 kinds of common sensors, such as Digital LED Module, Analog Temperature Sensor, Photocell Sensor, Ultrasonic Module etc, allow you make a lot of interesting projects like Traffic Light, Magnetic Check, Temperature Test, Joystick Test, Photo-interrupter Test, Alcohol Detection and so on..
We have detailed tutorial( included introduction, wiring diagram, test code, driver installation, Example Projects...... Step by step to explain how to use on our wiki page..
Solder is very clean, everything is aligned nicely, all boards are well packed after function, voltage, current testing, protected in a beautiful box. Up to FCC and CE Standard: made from environmentally friendly components and materials..

Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..

Check Stock

DROK® LM2596 DC Buck Volt Regulator 36V to 24V 12V 5V 3.3V 3V Converters Constant Volt&Amp 5-36V to 1.25-32V 5A 75W Step-Down LED Driver Switch Power Supply Digital LED Voltmeter USB Output

Output voltage :1.25-32V continuously adjustable,default output 17V. Output Current : 5A MAX( Please use it within 4.5A).
Having a current limiting protection. Even if output short circuit, it will not burn module.
Use as an ordinary buck module with overcurrent protection capabilities.
Use it as a constant current LED driver module or a battery charger.
If its output is more than 3A/35W, please enhance heat dissipation!.

Check Stock

Lagom 30\ Under Cabinet Lights & 12\ Linking Cord

30" width x 3" depth x 5/8" height. Linkable up to 20 units. ETL listed for damp locations. Power Cord SKU - PC0172BK.
16 watt built-in LED module, comparable to a 96 watt incandescent. 1180 lumens. Adjustable color temperature 2700K, 4000K, or 5000K. 90 CRI..
Dual mount LED under cabinet light, direct wire and plug-in installation. Power cord sold separately. No external driver or transformer needed..
This product is compatible with an in-wall dimmer switch. Dimmers that have been tested with this fixture: Lutron MACL-153M, DVSCELV-200P, SLV-600, DVCL-153P, TGCL-153P..

Check Stock