Top Leather Eyelet Puncher Reviews

Grommet Tool Kit Grommet Eyelet Plier Set, Portable Grommets Handheld Hole Punch Pliers Set with 500 3/8 Inch (10mm) Metal Eyelets Grommet Press Kits for Fabric Tarps Leather

  • 【Magnetic Mold】Magnetic dies to fix the eyelet and washer well. With the correct opening angle, you can press it by only one hand..
  • 【Anti-slip & Anti-friction Handle】The handle made of anti-slip engineering rubber material is anti-friction, anti-slip, and easy holding..
  • 【More Strength Saving】Using the principle of two-point support leverage, it is convenient to use and more strength saving to use. This manual eyelet puncher matches up 3/8"(10mm) inner diameter eyelets..
  • 【Portable & Lightweight】This manual eyelet puncher with a special lightweight design, it is easy to take to any place..
  • 【Widely Used】It can be used for PVC banners, tarpaulin, garments, bag, and case, etc..
Check Stock

Ailejia 20 Pack Curtain Grommets Lnner Diameter Silencer Sliding Grommet Kit Sheers Grommets Reusable Silencer Sliding Easy snap Install Silver 1.73 Inch Inner Diameter Fasteners (Silvery)

  • Magnetic Mold——Magnetic dies to fix the eyelet and washer well. With the correct opening angle, you can press it with only one hand..
  • Premium quality——The grommet kit is made of premium copper, the surface looks brighter. This material also has good resistance to rust. Thickened metal eyelets and washers are harder and more durable..
  • Portable & Labor-Saving——Lightweight & easy to carry. The ergonomic handle is comfortable to hold. Using the principle of two-point support leverage, it is convenient to use and more strength-saving to use. This manual eyelet puncher matches 3/8"(10mm) inner diameter eyelets..
  • Package Included——The grommet kit set includes a handheld hole punch plier, a pre-punch hole cutter, a cushion plate, and 500 sets of grommet eyelets (each set includes 1 eyelet and 1 washer)..
  • Widely Application——It can be used for PVC banners, tents, leather, and fabric..
Check Stock

Leather Hole Punch Tool for Belt - Multi Hole Sizes Puncher for Belts, Watch Bands, Straps, Dog Collars, Saddles, Shoes, Fabric, DIY Home or Craft Projects - with 5/32\ Grommet Eyelet Kit 100 Sets

  • ...ser manual. The ruler can measure your piece accurately and the screwdriver can replace spare plates and twist the screws on the belt..
  • 【Multifunction】The belt hole puncher has 6 different sized holes:2mm,2.5mm,3mm,3.5mm, 4mm and 4.5mm, all the most popular sizes. and is commonly used for punching round holes in leather, plastic, canvas, fabric, saddles, and similar materials.
  • especially useful as a leather hole punch..
  • 【High Quality & Safety】The durable leather punch is made of plated steel that is high hardness and durability. The surface of metal deal with spray lacquer process to avoid oxidation. The brass pad adopts the thickness design to guarantee on safety..
  • 【Ergonomics & Comfortable Design】The professional leather hole punch adopts the double-lever mechanism to greatly save your strength. Ideal for long, repetitive work without causing sore hands or blisters because the handles are cushioned, non-slip and ergonomic..
  • 【100% Satisfaction Guarantee】We always stand behind our products absolutely including the leather hole punch + grommet eyelet kit and we promise we will try our best to provide you with worry-free after-sale service. Any issues with the belt hole punchers, please DO NOT HESITATE to contact us. A 100% satisfaction sol....
Check Stock

DASBET Grommet Handheld Hole Punch Plier | Portable Handheld Grommet Pliers Hand Press Tool with 500pcs Grommets of 3/8 Inch (10mm) Silver Eyelets

  • Using the principle of two-point support leverage, it is convenient to use and more strength saving to use. This manual eyelet puncher matches up 3/8"(10mm) inner diameter eyelets..
  • Anti-slip and Anti-friction: The handle made of anti-slip engineering rubber material is anti-friction, anti-slip, and easy holding..
  • Magnetic Mold: Magnetic dies to fix the eyelet and washer well. With the correct opening angle, you can press it by only one hand..
  • Wide Use: It is suitable for shoes, clothing, shoelaces, DIY crafts projects, canvas, tarps, tents, awnings,and leather crafts and adding ornament to your crafts etc..
  • Package Included: 1x Portable Manual Grommet Machine.
Check Stock

Leather Hole Punch Tool for Belt - Updated Hole Sizes Puncher for Belt, Watch Band, Strap, Dog Collar, Saddle, Shoes, Fabric, DIY Home or Craft Project - with 5/32" Grommet Eyelet Kit 100 Sets

  • 【Multifunction】The belt hole puncher has 6 different sized holes:2mm,2.5mm,3mm,3.5mm, 4mm and 4.5mm, all the most popular sizes. and is commonly used for punching round holes in leather, plastic, canvas, fabric, saddles, and similar materials.
  • especially useful as a leather hole punch..
  • 【High Quality & Safety】The durable leather punch is made of plated steel that is high hardness and durability. The surface of metal deal with spray lacquer process to avoid oxidation. The brass pad adopts the thickness design to guarantee on safety..
  • 【Ergonomics & Comfortable Design】The professional leather hole punch adopts the double-lever mechanism to greatly save your strength. Ideal for long, repetitive work without causing sore hands or blisters because the handles are cushioned, non-slip and ergonomic..
  • 【Grommet kit set】Includes a set of matched mandrel (2 pcs) and 100 sets of grommets eyelets (each set includes 1 eyelet and 1 washer), the grommets eyelets are one size with 3 colors, the eyelets size is that 5/32 inch (4mm) internal hole diameter, 5/16 inch (8mm) outside flange diameter. they are good for add g....
Check Stock

Wilson Clash 100 Tennis Racquet - Quality String 4-1/2

  • 【Magnetic Mold】Magnetic dies to fix the eyelet and washer well. With the correct opening angle, you can press it by only one hand..
  • 【Anti-slip & Anti-friction Handle】The handle made of anti-slip engineering rubber material is anti-friction, anti-slip, and easy holding..
  • 【More Strength Saving】Using the principle of two-point support leverage, it is convenient to use and more strength saving to use. This manual....
  • 【Portable & Lightweight】This manual eyelet puncher with a special lightweight design, it is easy to take to any place..
  • 【Widely Used】It can be used for PVC banners, tarpaulin, garments, bag, and case, etc..
Check Stock

1/4 Inch Grommet Eyelet Plier Set, Eyelet Hole Punch Pliers Kit with 300 Metal Eyelets, Grommet Tool Kit for Leather Clothes Belt

  • Eyelet size: the inner diameter of the metal eyelets is 1/4 inch, the outer diameter is 1/2 inch, and the length of the barrel is 1/4 inch, you can easily use the eyelets kit to repair by yourself.
  • Please confirm the size before purchasing.
  • Easy to operate: the eyelet puncher are designed to hold well with the hand, have elasticity, easy to use, and can reduce hand pressure, very useful and multi-functional.
  • You need to punch holes with a punching tool before you can use the buttonhole and pliers.
  • Pay attention to the direction of the buttonhole and the pliers, the wrong direction will cause damage to the buttonhole.
  • Package includes: this convenient grommet kit including a one-piece punching tool, 100 pieces gold and 200 pieces silver 1/4 inch metal eyelets grommets, 2 different colors and abundant quantities are enough to meet your needs.
  • Convenient and practical: one-piece punch pliers is made of steel, chrome-plated on the surface, plastic-impregnated PVC handle, 6.6-inch metal pliers with mandrel jaws, can be placed directly after the eyelet is pressed, simple and convenient.
  • Warm note: the bottom of the eyelet is of flowering design, and no washer is needed.
  • After pressing with a hole punch, the bottom will bend naturally.
Check Stock

10Pcs Leather Hole Punch Cutter, 1.0mm-4.5mm Leather Punch Tool Round Hollow Hole Punch for Belts, Leather, Rubber Soft Material Working

  • Hole Punch Set Size: 10 pieces leather puncher round hollow leather hole punch, the sizes are: 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm..
  • High Material: Made of drop forged, heat treated steel for long-life sharpness and durability.The surface of the hollow punch cutter tools are coated with oil to prevent rust..
  • Wide Use: Suitable for punching holes in soft materials such as leather, watchbands, rubber, vinyl, handbags, clothing, cardboard, webbing, jackets or poster boards..
  • Easy to Operate: By placing a gasket puncher on the area that needs to be punched, and hitting the back end with a hammer or mallet,the easy-to-use circular hollow puncher has a unique art on the leather of different punchers..
  • Please Note: Please keep it out of the reach of children due to the sharp-pointed gasket cutting tool. The surface should be oiled to prevent rust, please clean up before use..
Check Stock

BIZOEPRO Grommet Tool Kit Grommet Press Pliers Portable Hole Punch Manual Kits Handheld Eyelet Machine W/with 500pcs 3/8 Inch (10mm) Silver Grommets

  • 【Portable & Flexible use】This grommet tool kit characterizes a special lightweight design, it is flexible for all angles of use and suitable for indoor or outdoor set-up, repair, and decorating works, etc..
  • 【Widely Used】It can be used for banners, tarpaulin, garments, bag, cardboard, tents, canvas, awning, curtains and case, etc..
  • 【Magnetic Mold】Magnetic dies to fix the eyelet and washer quickly and well, simple operation advantage so you can work faster..
  • 【Ergonomic handle for durability】The material of the handle is made of special plastic that is anti-friction, anti-skid, and easy-holding..
  • 【Superior quality】Applied with durable high purity metal for a longer life span.This manual eyelet puncher matches up 3/8"(10mm) inner diameter eyelets with 500pcs eyelets included..
Check Stock

【Upgraded Version】Grommet Tool Kit,Handheld 3/8 inch Eyelet Kit Manual Grommet Press Machine with 500 pcs 10 mm Grommets

  • 【Get extra hole punch】HAPDEN grommet pliers doesn't require pre-drilling before use.If you need to hole punch,metal grommet kit comes a hole puncher and a white backer block..
  • 【Upgrade jaw and die】Keeping the magnetic function of eyelet tool, HAPDEN adjust eyelet pliers opening angle to improve the accuracy of the clamp die. Metal eyelets do the job work better..
  • 【Intelligent&Portable】Upgraded version grommet setter tool is made of special lightweight aluminum alloy and weighs only 0.9 pounds(0.41kg).Add elastic device, automatic return after pressing..
  • 【Upgrade one-piece handle】Grommet fastener tool one-piece molding handle prevents peeling, black handle is skid-proof and dirty-proof, providing you with a better use experience..
  • 【Anti-rust grommet】Silver grommet is made of chrome-plated metal, which has the function of anti-rust and perfect match with the grommet magnetic pliers..
Check Stock

Leather Hole Punch,Belt Hole Puncher for Leather, Revolving Punch Plier Kit,Leather Punch Plier for Leather, Belts, Watches, Handbags, Leather Punch Tool for Belts Diameter : 4.5/4 /3.5/3/2.5/2mm.

  • Leather Punch Size】Belt hole puncher for leather machine adopts 6-stage rotation design,punching diameter: 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm.The hole diameter is clearly marked on the wheels for quick and easy selection of the appropriate size.Make your favorite belt fit you again,it's fun!.
  • Multi-function】For serious craft enthusiasts,punching round holes in leather,,belts,fabrics,buttonholes and eyelets, rubber,silicone, cardboard,saddles and similar materials is a very simple task.In addition,the pliers are also suitable for bags, paper, cards, felt, tarpaulins, pet collars, saddles and horse rope etc..
  • Ergonomic design】The professional leather puncher adopts a compound leverage. You don't need too much hand strength, because the double rod reduces the pressure, thereby protecting the fatigue of the wrist. In addition, belt puncher for leather have non-slip and environmentally friendly handles, which are comfortable and very suitable for long-term and repetitive work. And the punch plier will become small to save your space..
  • Perfect burr-free holes】The screw punch is made of high-quality manganese steel, which is hard and durable, and the unit weight: 17oz.Leather punch tool for belts includes a brass pad, small screwdriver, ruler to m....
Check Stock

Hole Punch, BYXAS PLA-100 Heavy Duty Leather Hole Puncher for Belts, Watch Bands, Straps, Dog Collars, Saddles, Shoes, Fabric, DIY Home or Craft Projects

  • Multi-function puncher:The 6-hole rotary puncher has the 6 most common sizes, which can accurately punch round holes of 2, 2.5, 3, 3.5, 4, 4.5mm. The punch plier is commonly used for punching round holes in leather, rubber, saddles, belts, plastic, fabric, canvas, and similar materials. It can not use for punching iron and aluminum plates..
  • Ergonomic design:Hole puncher adopts the double-lever principle, which can greatly save your strength during use. The handle of the punch pliers has a non-slip function and a palm protecting function. The non-slip handle can still work when you are sweating or in contact with water. In addition, it can protect your hands from being worn out due to long working hours..
  • High Quality and Safety: The durable leather hole punch is made of plated steel that is high hardness and durability. The surface of metal deals with the spray lacquer process to avoid oxidation. The brass pad adopts a thickness design to guarantee safety..
  • Convenient Storage:There is a stainless steel buckle at the bottom of the hole puncher. When you are not working, you can buckle it with a stainless steel buckle, so that the punch pliers will be smaller to save storage space and easy to carry..
  • Excellent punching effect:This manual mini hole ....
Check Stock

POUPHY Hole Punch Tool, Eyelet Hole Puncher Kits with 3/16 inch 200 Pcs Gold & Silver Metal Grommets for Leather Fabric Belt Clothes Card Paper Canvas Decorative Repair

  • From amazon family of brands. ROUPHY manufacturers, under amazon’s management, with all our strength provide attractive products in price and quality like amazon basics.
  • Built to Last: Unlike others, ROUPHY hole punch tools are made of heavy duty carbon steel and heat treated technology with over 60HRC hardness, quick and sharp to and would last.
  • Easy to use: Least effort design with spring for easy operation. One-piece metal button holes are self-backing.
  • With 3/16" hole diameter, 5/16" flanges, and 1/8" length under flanges, simple to add or replace holes in seconds.
  • Good for DIY Use: This practical tool can punch eyelets hole in materials like fabric, leather, belts, plastic, acrylic, canvas, suede, paper, card-stock and more to create laced effects on craft projects. Tips: Not applicable to films over 2.0mm, and films below 0.1mm.
  • What you get:Eyelet hole puncher*1, 100Pcs gold metal grommets*1,100Pcs silver metal grommets*1, soft tape measure*1, Grommet inner diameter:0.25 in, outer diameter :0.5 in, drum length: 0.25 in and 12 months warranty.
Check Stock