Top Leaf Spring Equalizers Reviews

LIBRA 3500lb Tandem Trailer Axle Suspension Kit Leaf Springs U-Bolt & Hanger Kit

1,750lbs capacity per each spring, for standard 3,500lbs trailer axle,Eye to Eye length: 25-1/4 inch, Free open: 3 inch, width of leaf: 1-3/4 inch, 4 leaves, 9/16 inch bushing dia, nylon bushings installed.
It will replace SW4B / 72-42 / LIB-401-DE / UNA212 / PR4B / 124903 / 9150014 / 93184 (different SKU# but same spring).
Include 3,500lbs axle U-bolt kit for 2-3/8" dia round trailer axles , Kit include: 4 x 5-1/2" long U bolts, U bolts dia. 1/2".
Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..

(4) 5 Leaf Slipper Spring for 7000 lb Axles.
(4) U-bolt Tie Plates for 1-3/4" or 2" Spring.
(8) 3-1/2" long x 9/16" diameter shackle bolts.
(2) 4-11/16" long x 7/8" diameter equalizer bolts.
This supsension and hanger kit is for a 7k tandem axle setup (14K total capacity).

Belltech's leaf springs are designed to easily lower the rear of your leaf spring equipped Sport Truck or SUV by up to 4 inches depending on application.
By recalculating the arch of the leaf spring and compensating with the appropriate spring rate through the latest manufacturing techniques.
All Belltech Leaf Springs are direct OEM replacements.
Come complete with high quality OEM style bushings.
OEM ride quality with added performance, control and comfort.
This is sold as a single leaf spring, quantity 1.

HEAVY-DUTY TOOL DESIGNED TO SAFELY INSTALL A SET OF ADD-A-LEAFS OR IN-PACK-HELPER SPRINGS.
Suitable for Most Trucks and SUVs with leaf spring suspension..
CONTENTS: (1x) Leaf Spring Unloading/Compressing Tool, Installation Instructions, and Supreme Suspensions Pro Pack.
TECHNICAL NOTES: Cold-Forged from High Strength Carbon Steel for Maximum Strength and Durability.
Self-Centered, U-Shaped Design to Completely Surround the Spring Pack Allowing an Even Unloading and Compression of your Leaf Springs..
EASY TO USE: Position the Leaf Spring Unloading/Compressing Tool over the spring pack, and tighten down the compression bolt to safely unscrew the center pin nut, and remove the leaf pack center pin. After removing the center pin, loosen the compression bolt until the springs decompress, allowing you to safely add the new add-a-leaf in the appropriate location. Reinstall the leaf pack by tightening the compression bolt and reinstalling the center pin..
BENEFITS: Allows for Even Unloading and Compression of your Leaf Springs to install a set of Add-a-Leafs or In-Pack-Helper Springs..

Belltech's leaf springs are designed to easily lower the rear of your leaf spring equipped Sport Truck or SUV by up to 4 inches depending on application.
By recalculating the arch of the leaf spring and compensating with the appropriate spring rate through the latest manufacturing techniques.
All Belltech Leaf Springs are direct OEM replacements.
Come complete with high quality OEM style bushings.
OEM ride quality with added performance, control and comfort.

Belltech's leaf springs are designed to easily lower the rear of your leaf spring equipped Sport Truck or SUV by up to 4 inches depending on application.
By recalculating the arch of the leaf spring and compensating with the appropriate spring rate through the latest manufacturing techniques.
Come complete with high quality OEM style bushings.
OEM ride quality with added performance, control and comfort.

COMPATIBILITY -- Universal fit to work with most aftermarket lift kits.
MAINTAINS SUSPENSION ALIGNMENT -- 2.5-In. wide leaf alignment clamp kit keeps spring pack aligned for proper suspension.
FOR LEAF ADDITIONS -- Use when adding a leaf to a factory spring pack.
ENGINEERED TO LAST -- Made of carbon steel for long service life.
HARDWARE INCLUDED -- Kit includes everything you need for one side - two U-clips and cap (purchase an additional kit if you're doing both sides).

Price For: Each Pin Material: Steel Pin Type: Nonremovable Hardware: Included Item: Spring Hinge Material: Steel Bearing Type: Plain Finish: Bright Zinc Height: 2-3/4" Width: 2-15/16" Range of Motion: 270 Degrees Holes per Leaf: 3 Corners: Rounded Mounting: Full Surface Leaf Thickness: 0.048" Frame Leaf Width: 2-15/16" Frame Leaf Length: 1-1/8".
Color: Silver Door Leaf Width: 2-15/16" Door Leaf Length: 1-1/8" Country of Origin (subject to change): Taiwan.

Price For: Each Hardware: Included Mounting: Full Surface Finish: Matte Material: Polymer/Stainless Steel Color: Black Range of Motion: 180 Degrees Item: Adjustable Spring Hinge Height: 1-9/16" Leaf Thickness: 0.390" Frame Leaf Width: 1-3/8" Frame Leaf Length: 4-3/4" Door Leaf Width: 1-3/8" Door Leaf Length: 4-3/4" Corners: Square.
Load Capacity: 154 lb. Self-Closing/990 lb. Gate Load Holes per Leaf: 2 Width: 3-9/16" Country of Origin (subject to change): Australia.

8 Leaf Spring Bushings - OEM replacement part # 101558.
4 Leaf Spring Bushing Spacers - OEM replacement part # 1012303.
This brand new high quality bushing kit replaces your worn or broken factory bushings. Worn out bushings can often make the golf cart ride rough and not smooth..

Includes 4 Bushings and 2 Metal Sleeves (enough for 1 front spring).
Fits Club Car DS (1981-Up) Gas and Electric golf carts Front Leaf Spring. Will work for Rear leaf spring.
You will need another 2 set of this listing!.

Includes 4 Bushings and 2 Metal Sleeves (enough for 1 front spring).
Fits Club Car DS (1981-Up) Gas and Electric golf carts Front Leaf Spring. Will work for Rear leaf spring. You will need another 2 set of this listing!.
Reference OEM Sleeve Part No#: 102288101.
Nivel Part Numbers: Sleeve 7742, Bushing 9452.