Top Lead Set Battery Holder Reviews

SDTC Tech 2/4/6/8 x 1.5V AA Battery Holder with Snap Connector Kit Include 3/6/9/12 Volt Battery Case Box and I Type Hard Shell Battery Clip Buckle Lead Wire

  • [DIY POWER SUPPLY] AA Battery Holder Kit suit for DIY 3/6/9/12 volt power supply converter..
  • [EASY TO USE] Battery Case can install 2/4/6/8 x 1.5V AA battery, and comes with 15cm I type hard shell battery snap clip lead wire, can connect other....
  • [MATERIAL] Made of plastic shell, copper conductor with nickel plating and nickel-plated steel spring, to ensure effective good contact, sturdy and....
  • [WIDELY APPLICATION] Battery Case usually applied in electronic circuit experiment, Arduino DIY projects, low-voltage energy supply device, primary....
  • [BATTERY BOX SIZE] 2 AA Battery Holder: 55 * 30 * 15mm, 4 AA Battery Holder: 55 * 30.5 * 29mm, 6 AA Battery Holder: 58 * 47 * 30mm, 8 AA Battery....
Check Stock

18650 Battery Clip 4 Slots 3.7V DIY Battery Storage Box in Series Plastic Batteries Case YOUCHENG for 18650 Battery with Connect Lead 4-Pack

  • 18650 battery holder with for 3.7V 18650 rechargeable batteries, Simple DIY recharge power supply.Great for led projects, toys, also replaces broken....
  • 18650 battery case holder with 22AWG leads, they are tinned wire end, the black and red two wire 150mm design is great for easily soldering and....
  • battery clip is made of PP plastic and has screw holes at the bottom to fix the battery holder in a proper position(Screw not attached).
  • Easy Installation Battery Holder For 4x 18650: Metallic spring with wire lead design for easy install and convenient for electric circuit DIY work..
  • After installing 14.8V in series on the battery, the red and black wires cannot be short-circuited.
Check Stock

DaierTek 4 AA Battery Holder with Switch 6V Battery Case Holder with Cover 4 Slots 1.5V AA Battery Storage Box with Wires Battery Connector -3pcs

  • Type: 4 AA battery holder with switch, 6V (4 x 1.5V) AA case battery storage..
  • Dimension: The size of the battery case holder is 68.7mm x 64.2mm x 22.5mm (LxWxH)..
  • With Wire: This AA battery case is lead design, the length of the tinned end wire is about 150mm (5.9 inch)..
  • Switch Design: There is an ON/OFF switch on the back of the AA case holder, make the use of the AA box easier and more convenient for you..
  • With Cover: This AA battery connector with switch will come with a cover, and this AA holder with cover is screw design, which can effectively prevent the box from accidental opening..
Check Stock

ELIVIA 12 Pack Clear Glass Candlestick Holders Taper Candle Stick Holders Set for Wedding & Home Decor - CH06

  • ♥CANDLESTICK HOLDER SET. MODEL: CH06. Including 12 pieces clear candle holders. Create a romantic atmosphere for you and the warm light from the candle holders makes people feel comfortable and relaxed..
  • ♥GENERAL STANDARD. The inner size of the hole diameter is 0.71” and the top size of the hole diameter is 1.28". Taper candle holder can be used with regular taper candles, chime candles and battery powered taper candles..
  • ♥SUPER SAFE PACKAGING. We specially reinforced the packaging for you, so that the breakage rate is less than 1%, which does not affect every important date..
  • ♥SAFETY AND ENVIRONMENTAL PROTECTION. ELIVIA votive candle holder made of 100% LEAD-FREE and quality glass with minimal wastage at every step of production..
  • ♥FRIENDLY TIPS: Glass has no heat insulation function. When you use traditional candles, do not touch the holders without any protective measures during the candle’s burning. Finished, touch it after cooling..
Check Stock

AUVON 3-in-1 36 Modes TENS Unit Muscle Stimulator for Pain Relief, Rechargeable EMS Machine with 40h Battery Life, TENS Machine with 12 Snap Electrode Pads and 1 Professional EVA TENS Travel Case

  • ...se. The buttons were newly upgraded to simplify intensity & channel operation, providing a user-friendly interactive experience. If you want to add intensity to channel A, simply press the button A+ for quick operation, no need to select a channel before adjusting the intensity. The 300 mAh rechargeable lithium battery offers 40h battery life, and the clear battery indicator will remind you to charge the device when the battery is low..
  • What You Receive. 1 x AUVON Dual Channel TENS Device, 12 x Electrode Pads (4pcs 4.8cm x 7.5 cm Palm-shaped Button Pads, 4pcs 4.5 cm x 9.5 cm Square Button Pads, 4pcs 3 cm x 4.4 cm Oval Button Pads), 2 x Snap-on Lead Wires, 1 x USB Type-C Cable, 1 x EVA TENS Travel Case, 1 x User Manual, 1 x Pad Holder, 12-Month Warranty and Friendly Customer Service..
Check Stock

Ltvystore 55Pcs Prewired LED Diode 5MM 12V White 7.87' LED Lamp Light Bulb Emitting Diodes &5mm LED Clip Holder Panel Mount &9V Battery Holder Clip Snap On Connector Cable Lead

  • Pre Wired Led Diode Lights are Very Bright, Energy saving,Low Power Consumption, Long Service Life: 5MM Round DC 12V Prewired LED Lamp Light Bulb Emitting Diode White, Life time is more than 5,000 hours.
  • Multifunction Pre wired Led 5MM 12V: Prewired led lights white ideal for hobbyists, RC car, boat, custom builds, DIY Car Boat Toys Parties and multiply lighting projects etc..
  • 5MM LED Holder Metal: chrome plated, fixing hex nut, suitable for use with 5mm LED, light emitting diode holder secure to hold LED firmly.
  • Environmental 9V Battery Buckle: Black red cable connection 9v battery clips connector buckle wire connecting head soft skin 9v battery buckle, great replacement for a broken battery connector on your electronic device..
  • What You Get: 30pack White Color LED Diodes Pre Wired 5MM LED Light Lamp Bulb Prewired Emitting Diodes + 15Pack 5MM LED Lamp Holder+ 10Pack 9 Volt I Type Battery Holder Clip Snap On Connector with Black Red Wire Lead.
Check Stock

Pack of 8 Wire Lead Battery Storage Box Case Holder for 18650 Button Top Single Battery

  • Wire lead battery case holder for 18650 single battery.
  • Suite for battery type: 18650 3.7V to 4.2V.
Check Stock

WSD Mechanical Pencil,Drawing Pencils,Sketch Pencils,Magnetic Control Pencil,Pencil Refills Diameter2.0mm, 2B Gold

  • Clutch Graphite Pencil - Press the pencil cap to adjust pencil lead's length,easy to carry and operate.Leadholder Length: 142mm/5.6 inch, Lead size: 90x5.6mm/3.5x0.2 inch..
  • Bulit-in Sharpener - Comes with a sharpener in the cap, you can sharpen the lead refills easily and conveniently to use at office, school or workshop..
  • Perfect Craft - The pencil holder is made from Aluminum,and the inner bearrel is made of Brass. Provide a full protection for pencil lead and durabel for long time use.Hexagon lead holder is easy to grip in any situation,providing a comfortable writing experience..
  • Wide Use - It can be used to basic drawing for kids, beginners, exquisite sketches of character and landscape for art students, painters, sketch writers, can also suitable for woodworking or artists quickly sketch out ideas,inspiration in a relatively short period of time..
  • Mechanical Pencil Set - One Mechanical Clutch with built-in sharpener,one 4MM lead.Perfect gift for artists,professionals,teachers and students..
Check Stock

uni Lead Holder Pencil, Holder, 2.0mm, No Sign (MH500NM)

  • This set contains one Pentel Multi 8 lead holder, eight packs of lead refills (Diazo non copy, PPC non copy, red, blue, brown, orange, yellow, and green), and a sharpener..
Check Stock

Jex Electronics One/Single/1X C DIY Battery Holder Case Box Base 1.5V PCB Mount with Bare Wire Ends

  • Single C battery Slot Holder Case with wire leads for soldering / connecting.
  • Total Voltage with 1X 1.5V C battery: 1.5V.
  • Curved over edges to hold battery securely in place..
  • Dimension: Approx. 58mm x 28mm x 22mm.(L*W*H).
Check Stock

ShineNow ST Soldering Tips for Weller WLC100 SP40 SP40N WP25 WP30 WP35 6pcs Combo with a Tip Holder

  • COMPATIBILITY Replacement Soldering tips for WELLER WLC100 WP25 WP30 WP35 SPG40 SP40 Tools.
  • APPLICATIONS This tip set consist of 2 chisel tips,2 round tips,1 bevel tips and 1 knife tip It is for general soldering applications,Spot,line and....
  • TIP HOLDER This tip set come with a solid tip holder that keep all your tips stored neatly.
  • TOP QUALITY These tips are tinned with lead free solder and capable of lead free soldering work that needs higher temperature,also it is Rohs....
  • WARRANTY We offer a 6 month warranty,if found any problem we assure you a full refund,just send us a message.
Check Stock

LAMPVPATH (Pack of 4) AA Battery Holder Bundle: Single AA Battery Holder, 2 AA Battery Holder, 3 AA Battery Holder with Wire, 4 AA Battery Holder with Leads Wires

  • Package includes 4Pcs and 4 types battery holder case boxes: (1) 1 aa battery holder,(2) 2 aa battery holde,(3) 3 aa battery holder,(4)4x 1.5V 6 volt battery holder.
  • Dimensions of AA battery holder(L*W*H): (1)single aa battery holder with leads: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm (2)2 aa battery holder with leads: 2.303" x 1.276" x 0.575"/5.85cm x 3.24cm x 1.46cm (3)3 aa battery holder with wires: 2.287" x 1.906" x 0.567"/5.81cm x 4.84cm x 1.44cm (4)4aa battery holder with wires: 2.248" x 2.457" x 0.622"/5.71cm x 6.23cm x 1.58cm.
  • Extra 2 Types of AA Battery Holder by DIY: Join one 2 X 1.5V aa battery holder with one 4 X 1.5V aa battery holder can get a 9V aa battery holder.
  • Join one 1 X 1.5V aa battery holder with one 4 X 1.5V aa battery holder can get a 7.5V aa battery holder. so, 9Volt aa battery holder and 5 aa battery holder are got by simple DIY..
  • AA Battery Holder Wire Leads: all aa battery case holder with leads, they are tinned wire end.
  • Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • Weight of One AA Battery Holder: (1)single aa battery holder: 0.141oz/4g (2) 2 aa battery holder: 0.247oz/7g (3)3 cell aa battery holder: 0.388oz/11g (4) 4 cell aa battery ho....
Check Stock

(Pack of 8)AA and AAA Battery Holders: 1Pc 1 AA Holder, 1Pc 2 AA Battery Holder, 1Pc 3 AA Holder, 1Pc 4 AA Battery Holder, 1Pc 1AAA Holder, 1Pc 2 AAA Battery Holder, 1Pc 3 AAA Holder, 1Pc 4 AAA Holder

  • Package includes 8 Types of AA and AAA Battery Holders: 1 aa battery holder, 2 aa battery holder, 3 aa battery holder, 4 aa battery holder, 1 aaa battery holder, 2 aaa battery holder, 3 aaa battery holder, 4 aaa battery holder.
  • AA Battery Holder Dimensions(L*W*H): 1 aa battery holder: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm.
  • 2 aa battery holder: 2.303" x 1.276" x 0.575"/5.85cm x 3.24cm x 1.46cm.
  • 3 aa battery holder: 2.287" x 1.906" x 0.567"/5.81cm x 4.84cm x 1.44cm.
  • 4 aa battery holder: 2.248" x 2.457" x 0.622"/5.71cm x 6.23cm x 1.58cm.
  • AAA Battery Holder Dimensions(L*W*H): 1 aaa battery holder: 2.047" x 0.519" x 0.476"/5.20cm x 1.32cm x 1.21cm.
  • 2 aaa battery holder: 2.082" x 0.948" x 0.516"/5.29cm x 2.41cm x 1.31cm.
  • 3 aaa battery holder: 2.039" x 1.276" x 0.575"/5.18cm x 3.62cm x 1.30cm.
  • 4 aaa battery holder: 2.091" x 1.976" x 0.484"/5.31cm x 5.02cm x 1.23cm.
  • Battery Holder Leads: all aa and aaa battery case holder with leads, they are tinned wire end.
  • Wires Diameter(count in the PVC isolation around the wire): 0.0393"/1mm.
  • AA and AAA Holder Weight: single aa battery holder: 0.141oz/4g.
Check Stock