Top Lcd Backlight Module Reviews

Character Negative LCD Module 16x2 RGB Backlight for Arduino and MCU projects

  • 16x2 Character LCD module with RGB backlight.
  • HD44780 compatible with FSTN Positive display.
Check Stock

DFRobot DFR0063 LCD Display, 16x2 Character, White on Blue, 5V, 82 mm x 35 mm x 18 mm Size

  • LED LCD Universal TV Backlight Constant Current Backlight Lamp Driver Board Boost Step Up Module 10.8-24V to 15-80V 14-37 Inch.
Check Stock

HiLetgo 1.8\ inch ST7735R SPI 128 * 160 TFT LCD Display Module with PCB

  • A specially designed dot matrix LCD module which is used for displaying letters, numbers and symbols etc..
  • Consists of several 5X7 or 5X11 other dot matrix character bits.The interval exists between each line or each bit to creat a good character spacing and row spacing effect..
  • Based on HD44780 LCD chip and adopts standard 16-pin interface..
  • It has a contrast adjustment knob, backlight selection switch, but also with four directional buttons, a selection button And a reset button..
  • This 1602 LCD expansion board in the true sense of the circuit will be simplified, directly to the board inserted Arduino Duemilanove controller can be..
Check Stock

NIXON Dork Too Men s Watch - All Black

  • Custom digital LCD module with speaker to dictate the time. Functions include time, date, alarm and EL backlight..
  • 34mm custom injection molded stainless steel case with perforated stainless steel speaker cover and pushers, with micro USB charging port..
  • 21mm custom folded stainless steel single link bracelet with butterfly clasp closure..
Check Stock

7inch DSI LCD 800×480 for Raspberry Pi 4B/3B+/3A+/3B/2B /B+/A+ and Compute Module 4/3+/3, 800×480 Capacitive Touch Screen Monitor

  • 7inch DSI LCD,7inch TFT screen. 800x480 hardware resolution.
  • Capacitive touch panel, support 5-point touch.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+ and Compute Module 4/3+/3,but Compute Module 4/3+/3 requires extra adapter board.
  • Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free..
  • DSI interface, refresh rate up to 60Hz. Support backlight adjusts by software..
Check Stock

NEC 48 LCD Commercial Monitor LED Display P484

  • Cooling System: Thermodynamic cooling fans| Dimensions: Without stand| Width: 42.8 in| Depth: 2.2 in| Height: 24.6 in| Weight: 38.8 lbs| LCD Display Technology: S-PVA| Resolution: 1920 x 1080| Display Format: 1080p (Full HD)| Image Aspect Ratio: 16:9| Motion Enhancement Technology: 60 Hz Refresh Rate| LCD Backlight Technology: LED backlight - edge-lit| Image Contrast Ratio: 4000:1| Brightness: 700 cd/mý| Viewing Angle: 178 degrees| Viewing Angle (Vertical): 178 degrees| Response Time: 8 ms.
  • Additional Features: TileMatrix (10 x 10), Open Pluggable Specification slot, Carbon Footprint Meter, AMX Beacon Compatible, 24/7 Scheduler, 10-bit support, DICOM support, PJLink, Raspberry Pi Compute Module Compatible, SpectraView Engine support, Crestron Roomview support| Stand: Optional| Flat Panel Mount Interface: 300 x 300 mm| Supported Memory Cards: microSD| USB Port: Yes| USB Ports Qty: 3| Type: Standard remote| Speaker System: 2 speakers.
  • Output Power / Total: 20 Watt| External Speakers Amplifier Power (Total): 30 Watt| Speakers: 2 x main channel speaker - built-in - 10 Watt| Connectivity: LAN, NFC| LAN Protocol: Fast Ethernet| Connector Type: DVI-D input - bottom Ý HDMI input - bottom Ý HDMI - bottom Ý 2 x DisplayPort input - bottom Ý Display....
Check Stock

AITRIP LCD 2004 LCD Screen Smart Display Screen Controller Module with Cable for RAMPS 1.4 Compatible with Arduino Mega Pololu Shield for Reprap 3D Printer Kit Accessory

  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
  • LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel.
  • 2004 LCD smart controller for 3D printer,Supports for RAMPS 1.4 control board.
  • This panel connect your RAMPS 1.4. 3D design print without a computer, just use the G code design stored on the SD card, SD card intelligent controller power supply. With Smart LCD Controller you can print 3D designs without USB connection to your computer.
  • A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking.
Check Stock

Honeywell Home RTH6360D1002 5-2 Day Programmable Thermostat

  • Large LCD digital display with backlight, easy to read in various lighting conditions, C-wire needed for proper installation(Tips, The product include an Electric Control Module and sensors).
  • Optional 7 day programming and non-programmable, Enjoy the flexible settings via full 7-Days/4-Periods Setting on device, to reduce energy usage, savings on annual heating and cooling costs..
  • EASILY INSTALL YOURSELF: It only takes about 30 minutes, Because our installation guide provides detailed installation steps, compatiblity:3H/2C, 2H/1C Heat pump, Aux Heat, Ventilator, Electric heating, Water heating, Millivolt system, Gas, Compressor..
  • Easily install yourself: Pluggable Module design, make DIY more efficiently. Save money: Homeowners save up to 17% annually on heating or cooling costs..
  • Vacation set-point override to reduce energy use while away from home, easy programmable mode ensures the desired temperature is reached by the programmed time..
Check Stock

DEVMO LCD 12864 Version Graphic Smart Display Controller Module Board with Adapter and Cable Compatible with RAMPS 1.4 Reprap 3D Printer Kit Mendel Prusa Ar-duino

  • A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment,....
  • Small and light appearance, it is easy and convenient to use.
  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
  • LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD....
  • This version is an upgraded version of reprap smart controller.
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V(Blue Display Color)

  • What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
  • Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

HiLetgo 3D Printer Reprap Smart Controller 12864 LCD Display with Smart Controller Board for 3D Printer RAMPS 1.4 Reprap Mendel Prusa for Arduino 128x64 LCD Blue Color

  • This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display..
  • LCD 12864 graphic smart display module with blue backlight, Small and light appearance, it is easy and convenient to use..
  • Using a large screen 12864LCD (3.2'), it can support 8 GB..
  • Print your 3D designs without PC, just with a g-code design stored on the SD card..
  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc..
Check Stock

JM Set of 3 pcs Transparent 3D Floating Frame Display Holder/Box/Frames for Challenge Coins, AA Medallions, Antique, Jewelry,Gift, White, 2.75 x 2.75 x 0.75 Inches

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

NEC EA271U-BK 27.4" 4K UHD Business-Class Widescreen Desktop Monitor,BLACK

  • ... Cooling System: Thermodynamic cooling fans| Dimensions: Without stand| Width: 42.8 in| Depth: 2.2 in| Height: 24.6 in| Weight: 38.8 lbs| LCD Display Technology: S-PVA| Resolution: 1920 x 1080| Display Format: 1080p (Full HD)| Image Aspect Ratio: 16:9| Motion Enhancement Technology: 60 Hz Refresh Rate| LCD Backlight Technology: LED backlight - edge-lit| Image Contrast Ratio: 4000:1| Brightness: 700 cd/mý| Viewing Angle: 178 degrees| Viewing Angle (Vertical): 178 degrees| Response Time: 8 ms.
  • Additional Features: TileMatrix (10 x 10), Open Pluggable Specification slot, Carbon Footprint Meter, AMX Beacon Compatible, 24/7 Scheduler, 10-bit support, DICOM support, PJLink, Raspberry Pi Compute Module Compatible, SpectraView Engine support, Crestron Roomview support| Stand: Optional| Flat Panel Mount Interface: 300 x 300 mm| Supported Memory Cards: microSD| USB Port: Yes| USB Ports Qty: 3| Type: Standard remote| Speaker System: 2 speakers.
  • Output Power / Total: 20 Watt| External Speakers Amplifier Power (Total): 30 Watt| Speakers: 2 x main channel speaker - built-in - 10 Watt| Connectivity: LAN, NFC| LAN Protocol: Fast Ethernet| Connector Type: DVI-D input - bot....
Check Stock