Top Lathe Expanding Mandrel Set Reviews

Penn State Industries PKSCKIT Mini Scissors Woodturning Project Kit

  • Brass tube, mini scissors parts, and clip only.
  • A LATHE IS NEEDED TO 'TURN' THE FINISHED HANDLE.
  • Blank, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (1) PKSCKIT Mini Scissors Woodturning Project Kit in Chrome.
  • Easy project to turn on a 7mm pen mandrel or between centers.
  • Minimum blank size needed to turn is 3/4" x 3/4" x 3".
  • Scissors tuck away safely in to your turned barrel.
  • When closed, finished length is approximately 4-9/32".
Check Stock

PSI Woodworking PENPAL Portable 15-Pound Mini Penmaking Lathe

  • 1/5hp 110V variable speed motor (0-4300 rpm).
  • Tailstock uses #1 Morse Taper mount (1MT).
  • Anodized aluminum base with mounting holes and flange to mount lathe on most surfaces.
  • Includes: pen mandrel shaft with collet closer nut for mounting, mandrel saver, (5) 7mm bushings, 7mm drill bit, (2) collet wrenches.
  • Also includes: mini dust collection hood with 2" port, 2" hose clamp, and hood mounting bracket.
Check Stock

Penn State Industries PKGCALL2 Arkansas Magnum Single Reed Duck Call Kit Woodturning Project

  • Pre-formed sounding board/reed assembly parts only.
  • A LATHE IS NEEDED TO 'TURN' INTO FINISHED GAME CALL.
  • Blanks, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (1) PKGCALL2 Arkansas Magnum Single Reed Duck Call Woodturning Kit.
  • Designed and tuned by game call professionals.
  • More range and versatility than double reed calls.
  • Minimum blank size needed to turn is 1-1/2" x 1-1/2" x 4".
Check Stock

Penn State Industries PKMSCUP Measuring Cup 4pc Set Woodturning Project Kit (1pack)

  • This is a woodturning project kit. A LATHE IS NEEDED TO 'TURN' INTO A FINISHED MEASURING CUP SET. Blanks, bushings, drill bit, and all other turning accessories are not included..
  • Includes (1) PKMSCUP Measuring Cup 4pc Set Woodturning Project Kit.
  • Each set includes the following measuring cup sizes: 1/4 cup, 1/3 cup, 1/2 cup, 1 cup.
  • Uses bushing set PKABBU. Requires a 7mm drill bit (PK-7MM) and 3/4" x 3/4" x 3-3/8" minimum blank size..
  • Easy to make on a pen mandrel. 'Turn' a must-have kitchen essential. Each set includes four of the most common measuring cup sizes used for cooking and baking.
  • 1/4 cup, 1/3 cup, 1/2 cup, and 1 cup. These cups are plated with durable, food safe stainless-steel inside, and chrome plated on the outside. Easy to hand-wash. The measurements are etched on the side for easy identification..
Check Stock

Penn State Industries PKGCALL23 Arkansas Magnum Double Reed Duck Call Kit Woodturning Project (Smoke)

  • Pre-formed sounding board/reed assembly parts only.
  • A LATHE IS NEEDED TO 'TURN' INTO FINISHED GAME CALL.
  • Blanks, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (1) PKGCALL2 Arkansas Magnum Single Reed Duck Call Woodturning Kit.
  • Designed and tuned by game call professionals.
  • More range and versatility than double reed calls.
  • Minimum blank size needed to turn is 1-1/2" x 1-1/2" x 4".
Check Stock

Nova 6050 1-1/2" Multi Project / Duck Call Jaws Jaw Set

  • Pre-formed sounding board/reed assembly parts only.
  • A LATHE IS NEEDED TO 'TURN' INTO FINISHED GAME CALL.
  • Blanks, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (1) PKGCALL23 Smoke Arkansas Magnum Double Reed Duck Call Woodturning Kit.
  • Designed and tuned by game call professionals.
  • Sound like a flock of mallards ranging from high up to a feeding call.
  • This double reed style takes more air to blow and doesn't have as much range as single reed models (PKGCALL2), however it have a "sweet spot" that sounds more realistic to passing ducks.
  • Minimum blank size needed to turn is 1-1/2" x 1-1/2" x 4".
Check Stock

TEXALAN Woodworking Drill Chuck with 2 Morse Taper Mount 5/8 INCH

  • [Installation]: This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
  • [Packing]: Includes the 5/8 inch Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
  • [Application]: Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
  • [Usage]: Tightens with a Chuck key for excellent grip. Removes easily with knock out bar.
Check Stock

WEN LA164K 5/8-Inch Keyed Drill Chuck with MT2 Arbor Taper.

  • Holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter.
  • Easily open and close the three chuck jaws using the included key.
  • Compatible with any MT2 drill press, lathe, or mill.
  • Installs easily with the simple tap of a rubber mallet.
  • Designed for use with WEN models 3424, 3424T, 3427, 34018, 34027, 34034, 4214, and 4225.
Check Stock

BestEquip Indexable Carbide Lathe Tools 1/2" Metal Lathe Cutting Tools 7 Pcs/Set Indexable lathe tools Super-Hard 40CR Lathe Bits Carbide Lathe Tool for Lathe Black Compact and Portable

  • Indexable &Sharp Inserts: 90°, 93°, 55°&95°carbide lathe inserts allow this lathe threading tool cutting with more flexibility and utility. Sharp,straight and even ccmt inserts can ensure high precision cutting..
  • Super-Hard 40CR Body: 40CR material of these lathe cutting tools has much higher hardness, so stable cutting is achieved due to its superior toughness and crack resistance..
  • Additional Subassemblies: This Lathe tool set comes with 2 installation wrenches in different type:3mm Allen wrench and T15 box spanner. A set of assembly screws and one 95°CCMT09T304 blade are free to provide much convenience to lengthen the service life of these metal lathe cutting tools..
  • Extensive Use: These metal lathe tools can be applied to digital-controlled lathe with various sizes, processin....
Check Stock

PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor 1/2 2MT

  • Includes the 1/2" Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
  • This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
  • The #2MT Arbor accepts 1/4" x 20tpi draw bolt.
  • Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
Check Stock

KCHEX 20pc 3/8' Carbide Tip Tipped Cutter Tool Bit Cutting Set for Metal Lathe Tooling

  • KCHEX’s lathe tools metal cutting are the perfect addition to your DIY and lathing tools collection. Whether you are a professional or recreational at lather, our lathe carbide bits are the perfect option..
  • Every one of our 3/8" metal lathe cutting tools in this 20 pack is made out of top tier stainless steel and carbide and has maximum quality. Our carbide lathe set is extremely durable as well as easy to use..
  • This lathe tool bits set contains 10 C2 and 10 C6 grade bits. Ultra useful for lathing steel and alloys. Simply fit them onto your lathe and create your dream designs. Purchase our carbide cutters for lathes and feel the SKEMIX difference!.
  • The carbide tipped tool bits are a great tool for your shed or tool garage. Gain a huge advantage over purchasing these carbide tips individually. Purchase the set and gain a design advantage..
  • Made out of reliable material, easy to use and clean, and providing perfect results in the garage, our carbide lathe tool tips are the way to go!.
Check Stock

PSI Woodworking Products TM32KL 1/2-Inch Keyless Drill Chuck with #2 Morse Taper Arbor 1/2 2MT Keyless

  • Includes the 1/2" Keyless Drill Chuck and #2 Morse Taper Arbor.
  • This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
  • The #2MT Arbor accepts 1/4" x 20tpi draw bolt.
  • Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
Check Stock

FJL FORCE Lathe Chuck Sets 4 Inch, Wood Lathe Chuck 5 Interchangeable 4-Jaw Wood Turning Lathe Nickel Plated Chuck, 1\x8Tpi Thread & 3/4\x16Tpi Adapter(Chuck Set)

  • 【PRODUCTS INCLUDE】 - FJL FORCE 4IN lathe chuck set includes chuck body,a set of fastening levers,T-hex wrench,1'' x 8TPI pre-thread and 3/4" x 16TPI conversion adapter, a set of 2in dovetail jaws,a set of step jaws, a set of flat jaws,a set of high jaws,a set of round jaws,to meet your creation basic clamping needs,no need to worry about going pairing and finding jaws,bringing much convenience to your operation..
  • 【LONG SERVICE LIFE】 - FJL FORCE 4inch self-centering keyed wood lathe body is made of high-grade K1045 steel,the sturdy wood lathe chuck can withstand high-intensity work without damage,extending the service life of the chuck.The jaws are hardened and hardened surface with black oxide electric coating,stain and wear resistant,not easy to rust,long service life..
  • 【ANTI-JITTER】 - Four-jaw mini lathe chuck has a high-precision self-centering design,the jaw fits perfectly with the chuck,tightening the clamping force beyond your imagination,the keyed fastening mechanism prevents the chuck from loosening during high speed operation,the claw and the disc body is linked with the I-shaped structure more firmly,the gap is small,the precision is high, there will be no jitter,falling problems..
  • 【QUICK INSTALLATION】 - Lathe tools clamping wi....
Check Stock