Top Large Step Drill Bit Set Reviews

FTG USA Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits Secured with Pin to 1/4 Hex Shank 1 Allen Wrench Counter Sinker Drill Bit Set for Woodworking

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock

Rocaris 39 Pack Woodworking Chamfer Drilling Tools, Including Countersink Drill Bits, L-Wrench, Wood Plug Cutter, Step Drill Bit, Center Punch, Drill Stop Bit Collar Set, Twist Drill Bit Tool

  • ...-Wrench, Wood Plug Cutter, Step Drill Bit, Center Punch, Drill Stop Bit Collar Set, Twist Drill Bit Tool. Pecfect gift for fathers, friends, carpenter and DIY lovers..
  • 7Pcs Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(Size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drill depth..
  • 8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfection. Can cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 3 Pcs 1/4" Hex Shank HSS Step Drill Bit Set – Great heat/ corrosion/ rust resistance with titanium coating. Specification: 4-12mm / 4-20mm / 4-32mm. Suitable for drilling holes in Iron Plate, Copper Plate, Aluminum Plate, Wood, PVC sheet, Insulation Boards. Not recommend for hard and brittle materials such as glass, tile floor, wall etc..
Check Stock

NEIKO 10180A Steel Spiral Quick-Change Step Drill Bit for Metal with 4-Flute Spiral Grooved Design, Nitride-Coated High-Speed Steel Multitool with 12 Sizes in 1 Step Bit, Unibit, Hole Drill Bit

  • HIGH-QUALITY DRILL BIT: Our individual NEIKO 10180A step drill bit is made with #4241 high-speed steel and has a titanium nitride coating for extra durability. The 4-flute spiral grooved design makes this a fast and long-lasting metal cutting tool..
  • QUICK-CHANGE DRILL BIT: With a 1/4-inch quick-change hex shank, this step drill bit fits securely in most pistol drills or drill presses. Use this cone-shaped, versatile, and small drill bit for metal projects at work or home..
  • DRILL BIT FOR HARDENED STEEL: This stepper drill bit for metal is perfect to create the exact hole size you need. The fluted spiral drill-bit design automatically deburrs and expands holes for a cleaner drilling process every time without heating up..
  • MULTISIZE DRILL BIT: This metal step drill bit can drill holes in 12 different sizes to meet any job requirements. Our 12-step drill bit for metal drills holes in 1/16-inch increments ranging from 3/16″ to 7/8″ to create the perfect-sized holes..
  • HEAVY-DUTY DRILL BITS: Our drill bits are created to work with any project, large or small. Our multifunction drill bits are designed with you in mind, so you can get your work done with confidence and speed using our quality tools!.
Check Stock

Step Drill Bit Set - Titanium Coated, High Speed Steel Drill Cone Bits for Sheet Metal Hole Drilling Cutting, HSS Multi Size Hole Stepped Up Unibit for DIY Lovers,3pcs

  • 【QUILITY STEP DRILL BITS】 The step drill bits are made of classic high-speed steel with titanium coating for proven capability and durability in drilling holes in plastic, aluminum, wood board, copper, stainless steel and many other types of sheet metal..
  • 【DOUBLE CUTTING BLADES DESIGN】The HSS step drill bit set is designed with double cutting blades, which provides faster, smoother and accurate drilling..
  • 【TRI-FLATTED SHANK】 Each unibit step drill bit optimally fits into power tools such as impact drill chucks securely and eliminates slip for higher efficiency of output..
  • 【WELL PERFORMED 】 The multiple hole drill bit set include 28 size, which can cuts through steel, sheet metal, wood board and other surfaces creating relatively clean holes as you drill. Suitable for home DIY, and general building/ engineering use.t slippage and shedding during the rotation..
  • 【SET INCLUDES】The cone drill bits set includes 3 common sizes for versatility. Bit #1 (6 steps): 3/16.
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

Cobalt Drill Bit Set - 13 Piece M35 Cobalt Drill Bits with Storage Case - Perfect Drill Bits for Metal, Hardened & Stainless Steel, Cast Iron, and More!

  • REPLACES 28 DRILL BITS: This set includes three standard SAE step drill bits that replace 28 individual drill bits.
  • TITANIUM COATED STRENGTH: Made of high speed steel with titanium coating for added durability and bit life.
  • SMOOTH DRILLING ACTION: Two-flute design provides faster, smoother cutting without walking and a tri-flat shank ensure a firm grip.
  • A COMPLETE SAE SET: Comes with one 3/16-inch to 1/2-inch six-step bit, 1/4-inch to 3/4-inch nine-step bit, and 1/8-inch to 1/2-inch 13-step bit.
  • CUTS AND DEBURRS: Cuts through steel, sheet metal and other surfaces with only a small amount of pressure and deburrs as you drill.
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

KSEIBI Step Drill Bit Set 5 Pieces Pack High Speed Steel Black Oxide M2 Multiple Hole 50 Sizes 1/8-1-3/8 inch SAE Standard Drill Attachment (KS-575105)

  • These HSS Double-Fluted Step bit kit provide faster cutting and drilling than single flute bits. The easy-to-read step markings and targets save time when drilling holes..
  • Drills clean, accurate large holes in these materials (up to 1-3/8in. diameter) hard sheet metal, ducts, steel, stainless steel, copper, brass, aluminum, plastic, plexiglass, wood, firewood, veneers, vinyl siding, acrylic, plasterboard, PVC pipe, , fiberglass and cast iron, Ideal for electrical, plumbing and HVAC contractors..
  • M2 high speed steel along with the black coating ensures extreme durability, will stay new and shiny for years to come. Different sized shanks ensure compatibility with 3-Flat Hex Shank - Prevents bit from slipping in the chuck while drilling holes 1/4, 3/8 and 1/2 in. chuck size..
  • Step drill bit can be used on electrical drill, cordless drill, or high impact drill press machine, combo set with durable ABS plastic organizer for easy and safe storage in your tool box..
  • Dual-flute design provides greater speed and control and optimized for cordless drills driver running at high speed.
Check Stock

Makita A-97748 1/8\ Black Oxide Drill Bit, 1/4\ Hex Shank

  • [Specifications and packaging]: 33 Piece hex shank twist drill bit set.Plastic case..
  • [Fitment]: Wood drill bit set for metal/wood/plastic sink. Suitable for home DIY, and general building/engineering use..
  • [Material]: Impact drill bits use classic high speed steel construction with titanium coating for capability and durability..
  • [Advantage]: Hex shank twist drill bit set drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • [Quick Replacement, Safe Installation]: Titanium drill bit fits into all power tools more easily and securely, specially for locking into quick change chuck. We also offer a quick-change adapter to better quick change..
Check Stock

NEIKO 10181A Step Drill Bit Set 3 Piece Spiral Grooved for Faster Drilling Step Bits for Stainless Steel Metal Wood Plastic Unibit Cone Drill Bits with 31 Step Sizes Total

  • PREMIUM STEP BIT: Each unibit is constructed of industrial high-speed steel with a titanium nitride coating for durability and strength to punch and drill clean holes in materials like plastic, aluminum, wood, copper, stainless steel, and other types of sheet metal..
  • STEP DRILL BIT FOR METAL: With a split point tip that accelerates cutting speed while preventing angled walking away from center line of bore, drilling holes in metal is fast, efficient, and clean..
  • SPIRAL DESIGN: The two-flute spiral grooved design deburrs chip, dust and debris for clearance and smooth cutting. With 31 step sizes, each hole made with these step bits will be precise..
  • QUICK-CHANGE: The 1/4-inch hex shank makes for easy, convenient, and quick stepper bit switches and is compatible with impact ready power tools..
  • INCLUDES: Each bit set comes with 3 drill bits of a combined 31 sizes to add to your drilling arsenal: 13 step drill (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2-inch) 6 step drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2-inch) and 12 step drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8-inch)..
Check Stock

28 Pack Woodworking Chamfer Drilling Tools with a Case Rocaris Including 6 Countersink Drill Bits Set 5 Metric Step Drill Bit 7 Counter Sinker Drill Bit Set with L-Wrench 8 Wood Plug Cutter.

  • ...um Coating Step Drill Bits: 3/16-1/2'', 1/8-1/2'', 1/4-3/4'', 3/16-7/8'', 1/4-1-3/8'', suitable for sheet metal, wood board, plastic, aluminum alloy, copper, NOT recommended for high carbon steel, hard metal..
  • 7 Pack Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(Size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drill depth..
  • 8 Pack 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfection. Can cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 6 Pack 1/4" Hex Shank 5 Flute Countersink Drill Bit – Made of high speed steel, they are pectect for sinking 90° hole in Wood and PVC board for ountersunk screw. Diameter- 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4")..
Check Stock

Titanium Step Drill Bit Set Unibit Drill Bits Unibits Set Uni Bit Step Bit Sets Stepped Drill Bits For Sheet Metal Hole Cutter Plastic Plexiglass Acrylic Impact Driver Unabit Up Stepper Cone Hex Shank

  • SET INCLUDES: (3) Titanium Step Drill Bits (Hex Shank), (1) Locking Quick Change Bit Holder Drill Adapter (Hex Drive), (1) Fabric Case.
  • The Step Bits in The Unibit Set All Have Quick Change 1/4” Hex Shanks (COMPATIBLE WITH DRILLS & IMPACT DRIVERS).
  • The Included Hex Drive QUICK CHANGE BIT HOLDER ADAPTER Lets You Easily Change Bits in Your Drill (it Fits The Unibits, Along With ANY Type of Hex Bit!).
  • Great For Drilling MULTIPLE SIZE HOLES in Thin Metal, Sheet Metal, Plastic, Plexiglass, Acrylic, Lexan, Plywood, PVC Pipe, Conduit, Polycarbonate, Fiberglass, And Much More!.
  • Step Drill Bit Sizes: 1/8” | 5/32” | 3/16” | 7/32” | 1/4” | 9/32” | 5/16” | 11/32” | 3/8” | 13/32” | 7/16” | 15/32” | 1/2” | 9/16” | 5/8” | 11/16” | 3/4”.
Check Stock