1.5\ Tri Clamp Ferrules, SS304 Long Weld Clamp Ferrule for Sanitary Fittings 2PCS
- Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
- Fit for all other homebrew stuff sanitary fittings..
Top Large Od Seamless Pipe Reviews
Heavy-Duty Malleable Casting Iron Wall Jack for Lifting Wall Beams Decks and More with Capacity of Lifting 1,000 lbs, Red, Pack of 1
- 1.Lifting Wall Easily – Designed to lift up walls, beams, or more into the vertical position or the desired position..
- 2.Work Alone – Allows a single person to safely raise a fully sheathed wall by the wall jack, lifting a wall with no help.
- NOTE: Do not stand under the wall when working.
- For large walls, two wall jacks are recommended in use..
- 3.Casting Iron – Made of heavy-duty and durable malleable casting iron which is weather-resistant and reusable.
- 4.1 " OD Pipe and 2" x 4" Pole – OD 1" pipe can be used as a lever that wall will be lifted up along the 2"x 4" (actual size is 1.5" x 3.5") pole. NOTE: Please use a clear straight-grained 2" x 4" pole that is free of all knots or defects.
- 5.Package Included - 1 pack of Wall Jack (1” pipe and 2"x4" pole are not included).
- Backs its products with 90 days warranty.
- Please feel free to contact us with any questions you may have..
flowmavin 1.5 inches Tri Clamp Tee 3 Way Sanitary Fitting Stainless Steel 304 Mirror Polished, 38mm Pipe OD.
- Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
- Fit for all other homebrew stuff sanitary fittings..
TRIL GEAR 8pcs Universal 610mm 2.5' Aluminum Turbo Intercooler Piping Kit with Elbow Hose & Bolt Clamps
- [Replacement for]- Replacement for Universal.
- Package Includes: 2Pcs OD:2.5" Straight Aluminum Pipes + 2Pcs OD:2.5" 45 Degree Aluminum Pipes + 2Pcs OD:2.5" 90 Degree Aluminum Pipes + 2Pcs OD:2.5" 180 Degree Aluminum U Pipes + 2Pcs Blue ID:2.5" 90 Degree Silicone Hose + 6PCS ID:2.5" Straight hose (avaiable Color:Blue Black Red) + 16Pcs 2.5" Stainless Steel T-Clamps.
- Specifications: Thickness: 1.8mm；Material: T6061 Aluminum；Aluminum Pipe Length: 23.62" / 60cm.
- [Function]-Transport clean, dry, sufficient and stable air to meet the needs of the engine, and avoid the abnormal wear and tear of the engine caused by impurities and large particles of dust entering the combustion chamber of the engine..
- [Note]-Before you place your order, please check the compatibility table in the upper left corner and page description carefully to ensure that it is suitable for your car. If you have any questions, pls ask us for help..
EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel
- Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
- Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
- Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
- Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
- EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
BLACKHORSE-RACING 2.5 OD 3 ID Universal Exhaust Pipe to Component Pipe Adapter Reducer Kits Reliable Stainless Steel 2.5 Inch to 3 Inch
- ۞Material: High quality stainless steel.
- ۞Small Diameter: 2.5” OD (Fits inside 2 1/2” ID Component).
- ۞Large Diameter: 3“ ID (Fits over 3” OD Pipe).
- ۞Metal Thickness May Vary: Approx. 1/16”.
SYKRSS 2.0' Stainless Steel Butt Joint Exhaust Seal Band Clamp
- Universal butt joint exhaust clamp fit for 2.0" OD pipe to 2.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
- It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
- Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
- The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
- SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
SYKRSS 2.25'Stainless Steel Butt Joint Exhaust Seal Band Clamp
- Universal butt joint exhaust clamp fit for 2.25" OD pipe to 2.25" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
- It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
- Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
- The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
- SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Rohn 25 Series 40' Basic Tower (25G)
- INCLUDES: (1) ROHN 45AG2 STANDARD 9' 6" TOP SECTION, (5) 45G STANDARD 10' SECTION. 50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete.
- The ROHN 45G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 45G Guides for Specifications and Installation Requirements*.
- 1-1/4" OD, 14 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 16 3/4" equilateral triangle design.
- Each section contains all required nuts and bolts shipped with each section. 45AG2 Features a tapered top and integrated mounting pipe. The mounting pipe is 2.38" OD / 2.07" Mounting PipeOverall length is 9'6" - see images for measurement breakdown. See description below for more information..
- 45G Weight: 70 lbs. 45AG2 Weight: 66 lbs. *This kit is shipped via freight only, see below for more information*.
EVIL ENERGY 2.25' 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs
- Joins 2.25 inch OD Pipe to 2.25 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, muffler and catalytic converters. Width of strap: 2.94inch (74.8mm). Torque: 63 N·m. Package: 2pcs..
- Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
- Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
- Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the sections being clamped have sufficient lengths of straight pipe leading into it. It is removable and reusable, easy to install without welding..
- EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Mild Steel Exhaust Pipe Mandrel Bend, 45 Degree, 2-1/2 Inch O.D.
- Premium heavy-duty steel construction for consistent performance and reliability.
- 2-1/2" OD 16 gauge tubing (0.0625" thick).
- Each pipe is expanded on one end to allow easy slip fit installation over another 2-1/2" OD exhaust pipe.
- This 45 degree mandrel bend is full size throughout the bend to maximize flow and increase horsepower.
- Build your own custom exhaust systems and headers.
Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]
- [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
- [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
- [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
- [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
- [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Westbrass R128-2-62 1/2\ Sure Grip Low Pattern Flange for Copper Pipe (5/8\ OD), 1-Pack, Matte Black
- Sure Grip Low Pattern Flange for Copper pipe.
- For mounting to 1/2 in. Copper pipe (5/8 in. OD).