Top Large Gantry Cnc Cutter Reviews

High Speed Belt Drive Linear Guide Rail 200mm Motion Slide Actuator Module +Nema23for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 500mm/s.
  • Comes with 1.3N.m NEMA23 motor and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

High Speed 400 MM 16 INCH Stroke Belt Drive Linear Guide Rail Motion Slide Actuator Module for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 1500mm/s.
  • Comes with NEMA 23 motor base(not motor) and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

High Speed 700 MM 28 INCH Stroke Belt Drive Linear Guide Rail Motion Slide Actuator Module for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 1500mm/s.
  • Comes with NEMA 23 motor base(not motor) and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

Electric Linear Rail Guide 200mm Ballscrew 1605 Slide Stage Load 250kg Nema23 Motor Base for DIY CNC Z Axis

  • Stork:200mm/8” 400mm/16” 600mm/24” 800mm/32”.
  • Double HG15 Heavy Duty Linear Rail Guide and SFU1605,Ball screw accuracy: C7(±0.02mm).
  • Equipped with BK12 Special shaft end support and high-intensity motor bracket.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use.
Check Stock

Linear Guide Slide Table 8mm Lead Ball Screw Motion Rail Aluminum Alloy CNC Linear Guide Stage Actuator for 3D Printer Engraving Machine(300mm-Silver)

  • Stork:298mm/11.7”,SFU1605,Ball screw accuracy: C7(±0.02).
  • Equipped with mounting bracket and HD ruler,Laser engraving hand wheel with pointer 360 equal parts.
  • Sliding table bottom plate size (width * height)：89*61mm，double optical axis guide.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide, gantry sliding table.Fast delivery:delivered 4-6 days after shiping.
Check Stock

BRIO World - 33732 Gantry Crane | 4 Piece Gantry Crane Toy for Kids Ages 3 and Up

  • Product includes - The Gantry Crane comes with 4 pieces and includes a sliding cabin, cargo wagon, and load..
  • Perfect for the creative toddler - Start your budding train engineer off on the right track or expand your collection with a Gantry Crane. It’s the....
  • Compatibility - As your child develops, so can their railway play as the Gantry Crane is compatible with all other BRIO railway toys..
  • Develops important skills - Playing with train sets helps children to understand and learn about their environment in a fun way, and the train....
  • Safe for your child - We conduct more than 1,000 safety tests a year to ensure that our products conform to all safety standards, and we take pride in....
Check Stock

MNA 1/4 Inch Shank CNC Spoilboard Surfacing Router Bit,4PCS Router Bit Set,4 Wings,1-37/64-Inch Cutting Diameter,1/4' 5/16' 3/8' 1/2' Milling Depth

  • MNA CNC spoilboard surfacing router bit is ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut..
  • 4 WINGS WOOD CNC ROUTER BIT:1/4-Inch Shank Rabbet Slot Cutter Router Bit Set, Shank Size: 1/4", Cutting Diameter: 1-37/64", Cutting Depth: 1/4"-1/2" , Cutting Height: 1/4", 5/16", 3/8", 1/2".
  • 4 Different cutting height router bits can use as spoilboard surfacing router bits or rabbet slot grooving bits.
  • American industry classification C3 Carbide. Fit for all types of wood material, such as: MDF, hardwood, softwood, and particle board..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock

Fiber Cutter, Fiber Cleaver Aluminum Alloy Tungsten Steel ABS Unbreakable Portable High Accuracy for Net Installation

  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

500W CNC Router Machine, CAMXTOOL 3020 CNC Machine for Metal Acrylic PCB PVC Wood Carving CNC Milling Machine with Large Working Area 11.80x7.90x2.87inch (300x200x73MM)

  • . Please check the video to know how to install and use the software.
  • ♞【Easy Assembly Version CNC 3018 Pro】We have UPDATeD! You don't need to spend a lot of time assembling it! This new version already has the base installed, you just need to install the gantry part.
  • ♞【Latest Version Control Board】After repeated tests, we have upgraded some parts of the control board to make it work more stably. Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing + Add Emergency Stop Switch Port to extend the life of the control board, Self-contained short circuit protection, Not easy to damage.
  • ♞【Offline Controller】Great for beginners. Upgrade from 128MB to 1G Capacity. Main advantages: 1,can operate without connect the computer.
  • 2,Included SD card reader to write into the root directory G-code files or NC file.
  • Support Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle.
  • ♞【Wide Application】Suitable for carve wood, plastic, acrylic, PCB CCL, soft metal like copper and aluminum and other materials....
Check Stock

LAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

  • ... engraving and caving, pls note our machine comes only 500w spindle , laser module is not included..
  • ✅ Large Engraving Area & Upgraded Offline Control : LAKIX CNC Router Machine has large effective engraving working area 430mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
  • ✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quieter and more steady and is ideal for intricate patterns..
  • ✅Easy assembly : Main parts are pre-assembled, easy assembly process that takes 15-20 min. Wires are labeled clearly for fast connection and bundled into drag chain for easy management..
Check Stock