Top Large Cnc Flame Cutter Reviews

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....

Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

Check Stock

Fiber Cutter, Fiber Cleaver Aluminum Alloy Tungsten Steel ABS Unbreakable Portable High Accuracy for Net Installation

Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..

Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.

Check Stock

LAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

... engraving and caving, pls note our machine comes only 500w spindle , laser module is not included..
✅ Large Engraving Area & Upgraded Offline Control : LAKIX CNC Router Machine has large effective engraving working area 430mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quieter and more steady and is ideal for intricate patterns..
✅Easy assembly : Main parts are pre-assembled, easy assembly process that takes 15-20 min. Wires are labeled clearly for fast connection and bundled into drag chain for easy management..

Check Stock

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Black)

High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

Check Stock

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Orange)

High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

Check Stock

CNC End Mill Set, Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm 8pcs

2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
Material: Tungsten steel Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry..
Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable..
Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
Package Included：8 x 4 Flutes End Mill Cutter.

Check Stock

Cigar Torch Lighter, Triple Flame Refillable Butane Jet Lighter, Cigar Punch, Cigar Draw Enhancer, Cigar Holder, All-in-one Lighters, Cigar Cutter, Cigar Accessories, Gifts for Men- Gas Not Included

【ALL-in one BUTANE TORCH LIGHTER】Boonfire cigar torch lighter is equipped with a cigar punch,cigar draw enhancer, cigar holder.It can be disassembled and used separately. With a cigar cutter and flame adjustment tool. The lighter unit is packaged in an exquisite gift box, which is a great choice for friends & family, Wedding, Father's Day, Birthday, Anniversary, Thanksgiving, Christmas, New Year, etc.
【TRIPLE FLAME TORCH LIGHTER】Boonfire lighters designed with 3 burners. The firepower is strong enough to ignite cigars, candle cans, gas stoves, barbecue grills, camping, fireworks, charcoal, etc (Butane NOT Included).
【STURDY MATERIAL& STYLISH DESIGN】Boonfire lighter set and cigar cutter are made of zinc alloy, cigar puncher,cigar draw enhancer, cigar stand.It can be disassembled and used separately. Perfect pocket fit, very suitable for daily carrying.
【REFILLABLE & ADJUSTABLE】Butane refillable lighter with fuel level window helps check and refill butane in time. The flame is adjustable. The package includes a flame adjust tool to adjust the flame height of the lighter. The operation is simple and convenient. NOTE: Due to mailing regulations, there is NO BUTANE in the lighter. Please fill the gas after receiving the lighters.

Check Stock

MYSWEETY 2 in 1 5500mW CNC 3018Pro-M Engraver Machine, GRBL Control 3 Axis DIY CNC Router with 5.5W Module Kit, Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine with Offline Controller

...ocess. A great tool for entrance CNC. Able to curved text on daily materials easily. Great for those who are interested in CNC, helping you engrave the model efficiently..
Come with 5.5W 5500mW module - Can be carved wood, bamboo, paper, leather, flammable plastic, PCB, PVC, acrylic(Only suitable for spindle milling cutter engraving). Can not work on metal, iron, glass, 201/304 stainless steel, jewelry, aluminum or silver..
Large Working Area- With an effective engraving area of 300 x 180 x 45 mm (11.8 x 7.1 x 1.8), the 3018pro-M can easily accommodate most projects. Control software: GRBL.
Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
New Control Board- Integrated driver chip + fixed heat sink + external fan + sturdy casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty. It come with the spindle motor and 5.5W module on Z axis. If you use the spindle, please remove the module..
Simple Assembly- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.

Check Stock

HTPOW Laser Engraver, Laser CNC Carving Machine , Large Area Printer cutter engraver 16.1'x14.5', Support Win/MAC/OS/Mobile WiFi Connection, Apply to Wood, Bamboo, Acrylic, Leather (20W)

【Innovative Eye Protection Design】HTPOW l wood cutter machine,The wood engraver protective cover perfectly protect your eyes,filter UV light for 97%. You can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles, prevent pets and children from grabbing the laser spot..
【High-Precision & Easy Installation】DIY laser cutter engraver machine adopts Aluminum alloy guide rails and rubber pulleys, smooth running, precise engraving, high-quality laser, precise beam control, engraving accuracy of 0.01mm.
engraving area of 16.14×14.57''.The entire engraving machine adopts a modular design, replace and update cnc laser cutter engraver machine parts. And the assembly can generally be completed within 10-20 minutes..
【Upgraded Auto Focus Function:】 wood laser cutter engraver machine no need to adjust the focus before engraving.
the new metal laser focal spot is 50% smaller than other wood engraving machine , new wood carving combines precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser..
【Wide compatibility & Precise scale lines axis】There are precise scale lines on the X-axis and Y-axis to facilitate....

Check Stock

ZCEN Mini Pipe Tubing Cutter for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass

The main body of the pipe cutter is made of lightweight and durable aluminum castings, and the blades are made of CNC machining with most durable alloy steel..
Rotate the knob to clamp the tube, Revolve the tube cutter around the pipe, and tighten the clamp steadily after each turn until it is completely cut..
Designed for tight spaces, the height of 2 inches allows you to use it in cramped spaces on small diameter pipes..
Used for cutting copper, brass, aluminum, thin steel, and PVC pipes with an outer diameter of 1/8 to 1-1/8 inches (3-28 mm). It's even used as a brake wire cutter or exhaust pipe cutter..
If you have any quality issues with your Tube Cutter, please feel free to contact customer service for troubleshooting help, replacement, or refund..

Check Stock

2021 PowerPlasma 102i 100 Amp plasma cutter with CNC Package

Comes With Blow Back iPTM-100 CNC machine plasma torch.
IGBT Infineon Modules / Inverter technology.
100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
Up to 1 1/8″ clean cut with CNC (edge start).
Pierce up to 5/8″-3/4″ with auto THC.

Check Stock