Top Land Rover Series Door Seal Kit Reviews

Transmission Filter Service Kit with Upgraded Premium Components and Easier Installation for Land Rover LR3, LR4, Range Rover, and Range Rover Sport

  • Land Rover Transmission manufacturer ZF recommends changing your transmission oil and filter every 50,000 to 75,000 miles for an optimal performance..
  • Save Time and Money: This premium kit offers an alternative installation process that is much easier than the standard transmission service routine. Instead of jacking up the motor, you just simply remove the sumps filter tube all together. The new separate filter is then fitted and then pan is bolted up with gasket provided..
  • Premium Replacement Parts: In addition to the OE transmission filter, this kit comes with a premium steel sump pan versus the genuine plastic pan..
  • This kit is designed specifically for the Land Rover LR3 / Discovery 3 (2005 - 2009), LR4 / Discovery 4 V8 5.0 Liter Engine (2010 - 2013), Range Rover L322 4.4 (2006 - 2009), Range Rover L322 4.2 Supercharged (2006 - 2009), Range Rover L322 (2010 - 2012), Range Rover Sport (2006 - 2013).
Check Stock

Engine Fuel Injector Removal Tool Puller for Land Rover Range Jaguar 5.0L V8

  • Injector Removal Tool Puller for Land Rover 5.0 3.0.
  • Easy Remove Fuel Injector: Usually, Injectors on vehicles are very tough to pull in general , but this tool could easy remove fuel injector, Improve efficiency, save a lot of time, it's possible to remove injectors from a Range Rover without it, is a must tool for remove fuel injector.
  • Application: This fuel injector remover tool compatible with Land Rover/Jaguar 3.0 5.0 petrol engine, fit for Jaguar X150, XK Series, X250(XF) and XJ models (V8 5.0lt petrol engines). fit for Land Rover Discovery 4, new Range Rover, Range Rover Sport (V8 5.0lt petrol engines), replace OEM 310-197.
  • Exceed OEM Design: Our fuel injector remove tool improved on the basis of OEM, our design more easy to use, give auto repair engineers a better experience.
  • Quality Guarante: This fuel injector remover tool made of high qualuty steel, high hardness and strong endurance to ensure that it is still intact after high-strength impact, and we offer lifetime warranty..
  • Tips: Before use, please tighten the nut at the end of the slider to prevent it from slipping off during use.Hold slight downward pressure on the locking clasp as u use the slide hammer to pop the injector free,that will get better results.
Check Stock

VMS RACING 94-97 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1994-1997 1.8L BP-ZE Engines ONLY OEM SIZE (uses same belts)

  • APPLICATION ENGINE -- 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN. Replace OEM 303-1437.
  • FOR VEHICLE MODEL -- For Jaguar vehicle applications include: F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 - 2018, For Land Rover vehicle applications include: Discovery 4/Discovery, For Range Rover, Range Rover Sport 2009 - 2018..
  • FUNCTION -- Set of tools required for the removal and installation of the front crankshaft pulley(Crankshaft Vibration Damper) for Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines. A must have for removing and installing for land rover jag crank pulley..
  • BENEFITS -- The crankshaft pulleys used on these engines are tightened to 200 Nm + 270 degrees, so are very tight to undo. This kit helps hold the pulleys tight. Also included in the kit are the puller component’s required to remove the pulley without damage..
  • SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • Applicable Engine: 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN, OEM Equivalent 303-1437.
  • Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley t....
Check Stock

LAND ROVER RANGE ROVER L322 REAR BACKUP REVERSE LAMP - RH NEW GENUINE XFD000043

  • GENUINE LAND ROVER REAR BACKUP REVERSE LAMP FOR RIGHT HAND PASSENGER SIDE COMPATIBLE WITH LAND ROVER RANGE ROVER FULL SIZE L322 2003-2012 PART: XFD000043.
  • Description: Reverse Lamp -Comes as complete assembly including bulbs Recommended Quantity: 1 Dimensions: 0.08 m x 0.21 m x 0.075 m Weight: 0.171 kilo Supersedes: XFD000042.
  • Fits: Range Rover Full Size | '03 - '05 Range Rover Full Size | '06 - '09 Range Rover Full Size Supercharged | '06 - '09 Range Rover Full Size | '10 - On Range Rover Full Size Supercharged | '10 - On.
Check Stock

X AUTOHAUX Car Center Console Cup Holder LR021330 for Land Rover LR2 LR3 LR4 Range Rover Sport

  • Fitment: for Land Rover LR3 2005-2009, for Land Rover Range Rover Sport 2006-2013, for Land Rover LR2 2009-2015, for Land Rover LR4 2010-2015, for Land Rover Range Rover 2010-2012.
  • OE Number: LR021330 Please check the OE number to see if our product fits your vehicle..
  • Quality Materials: This front center console holder is made of quality and tough materials which are durable and intends for long service life..
  • Features: Features a round compact cell to hold the cup and makes your vehicle clean and tidy..
  • Placement on Vehicle: The cup holder can be installed in the center console to keep your cup steady in the car..
Check Stock

Set of 2 Front Hood Lift Support Struts Gas Spring Shock for Land Rover Range Rover 2003-2012

  • YHTAUTO Affordable and Prime Lift Support Shock Struts, Directly Fit.
  • Fits Land Rover Range Rover 2003-2012 L322 Series (Not fit for Range Rover Sport/Range Rover Evoque models).
  • Reference Number: 32029656, BKK760010, 6358, E11675701CP.
Check Stock

Land Rover Genuine Parts LR031439 Oil Filter 4.4L V8 LR3 L320 & L322

  • Genuine oil filter straight from Land Rover.
  • Sold by the largest Land Rover Parts company in the United States, Atlantic British.
  • Fits Land Rover LR3 (2005-2009), Range Rover Sport (2006-2009), Range Rover Sport Supercharged (2006-2009), Range Rover (2006-2009), and Range Rover....
Check Stock

TRW Pro TRM1692 Disc Brake Pad Set For Land Rover Range Rover Sport 2014-2021, Rear, And Other Applications

  • Fits right, the first time, with all pads slotted and chamfered according to OE specifications.
  • Copper Free for less impact on the environment.
  • For confirmed fitment of this TRW Pro Disc Brake Pad Set please verify your vehicle with the Check Fit option above.
  • Fits: Land Rover Defender 110: 2020, Land Rover Discovery: 2017 - 2020, Land Rover Range Rover: 2013 - 2021, Land Rover Range Rover Sport: 2014 - 2021.
Check Stock

RASTAR BMW RC Car, 1/14 Scale BMW Z4 Roadster New Version Remote Control Car, Convertible Toy Car – Red / 2.4Ghz

  • OFFICIALLY LICENSED BY LAND ROVER - 1/14 scale radio remote controlled Land Rover Defender.
  • Full FUNCIONTS - Forward, reverse, stop, turn left & right.
  • Speed 5 mph, remote range up to 98 feet, great flexibility for turns.
  • Frequency available in 2.4GHz, which allows multi-users to race several cars together at the same time without interference..
  • DETAILED INTERIOR/EXTERIOR – Doors opened by manual, including front doors and rear door.
  • LED headlamps and taillights will be working as the rc car moves forward and reverses.
  • features with 4-wheel independent suspension system, shock absorption, differential mechanism, silver rims wrapped in grip tires, steering wheel, rearview mirror and etc..
  • BATTERIES POWERED, NOT INCLUDED - Requires 5 AA for the car and 1 x 9V for the remote.
  • this Land Rover Defender rc car needs a smooth surface like concrete, wood or asphalt though, no carpet..
  • READY TO RUN - Factory assembled, easy to play.
  • Choose Rastar Official for remote, accessories, and better after-sale service..
Check Stock

Land Rover Range Rover Classic 1987-1995 / Discovery 1 1994-1999 Wheel NUT with Washer Part# RRD500560 / ANR2763MMM

  • LAND ROVER RANGE ROVER CLASSIC 1987-1995 / DISCOVERY 1 1994-1999 WHEEL NUT WITH WASHER PART# RRD500560 / ANR2763MMM.
  • Alloy wheel nut with part number RRD500560 fits all alloy wheels on the Land Rover Discovery 1 and Range Rover Classic 87 - 95 || Land Rover # RRD500560 - Wheel Nut With Washer || Fits: Discovery I | '94 - '99 Range Rover Classic | '87 - '95 Defender 90 | '94 - '97 Defender 110 | '93.
Check Stock

LEGO Technic Land Rover Defender 42110 Building Kit (2573 Pieces)

  • Fans of LEGO Technic sets and Land Rover vehicles will enjoy an immersive and rewarding building experience with this highly authentic LEGO Technic Land Rover Defender replica, packed with realistic features and functions.
  • This collectible model of the quintessential 2019 Land Rover Defender really captures the vehicle’s level of refinement with its clean, modern lines and sculpted surfaces, making it a great display piece for the home or office.
  • Developed in partnership with Land Rover, this building toy has working steering, 4-speed sequential gearbox, All Wheel Drive with 3 differentials, independent suspension, detailed in-line 6-cylinder engine and a working winch.
  • Cabin features a detailed dashboard, working steering wheel, gear section with 2 levers for engaging high or low gear ratios and a selector for changing gear, plus forward-folding seats for visual access to the gearbox.
  • This 2,573-piece LEGO Technic Land Rover Defender 42110 delivers an immersive building experience and makes an ideal Christmas or birthday gift for all aged 11+. Measures over 8-inch (22cm) high, 16-inch (42cm) long and 7-inch (20cm) wide.
Check Stock

TRW Pro TRH1098 Disc Brake Pad Set For Land Rover LR3 2005-2009, Front, And Other Applications

  • Fits right, the first time, with all pads slotted and chamfered according to OE specifications.
  • Copper Free for less impact on the environment.
  • For confirmed fitment of this TRW Pro Disc Brake Pad Set please verify your vehicle with the Check Fit option above.
  • Fits: Land Rover LR3: 2005 - 2009, Land Rover Range Rover: 2006 - 2009, Land Rover Range Rover Sport: 2006 - 2009.
Check Stock