Top Lab Oscilloscopes Handheld Reviews

Proster 100 MHz Oscilloscope Clip Probes with BNC to Mini Grabber Test Lead Kit BNC to Mini-Grabber Clips Oscilloscope Probe

Universal Oscilloscope Probe: 10:1 and 1:1 switchable bandwidth 100MHz, suitable for oscilloscopes from all manufacturers , equipped with the standard BNC connector.
Test lead of a BNC connector to 2 mini-grabber clips: 48 inch mini-grabber clips coded in black and red, keep this handy lead on hand for your next electronics project.
High Sensitivity: Fully shielded welding BNC connector, less signal interference.
pure copper plated gold pin, less contact resistance and good contact performance.
Interchangeable Probe Tip. High Input Impedance (X10 Range). Low power consumption and energy-saving.
Suitable for all digital oscilloscopes and analog oscilloscopes voltage detectors to test circuit.

Check Stock

Digital Oscilloscope Kit,Aideepen Handheld oscilloscopes with DC/AC Power Supply and BNC-Clip Cable Probe

【Easy】This handheld oscilloscopes is a complete finished product, without welding,easy to operate and carry,very suitable for your electronic project..
【Added】We added a 9V battery buckle, you just need to connect the 9V battery use it at outdoor..
【Clearly display】2.4-inch TFT Clearly display the test results, and can freeze/save waveform display content at any time.(including frequency, period, duty ratio etc.).
【Function】5mV/div - 20V/div high Sensitivity,With Auto/Normal/ Single trigger model,added the rotary encoder, makes parameter adjustment quicker and easier.You also can conduct secondary development , for example, it can be changed to Millivoltmeter, data loggers..
【Package】1* Oscilloscope,1* BNC-clip cable,1*User Guide,1*AC Power Adapter,1*9V battery buckle(NOT Included 9V battery).Pls contact us if have any quality issue and need support, will reply within 24hours..

Check Stock

Micsig Oscilloscope Probe CP2100A AC/DC Current Probe 800KHz 10A/100A with Standard BNC Interface

The CP2100A Oscilloscope Probe has automatic and manual zero adjustment modes, it can also perform zeroing and demagnetization automatically or manually. Bandwidths up to 800KHz..
The split design makes the probe small and exquisite , easy to carry and use..
This CP2100A Current Probe can be powered by Oscilloscopes USB port and doesn't require any extra power supply..
It comes with a standard BNC interface, applicable to all BNC interface oscilloscopes. It also can be used with a multimeter after adding the suitable adapter..
Satisfaction Guarantee: We offer a 1-year manufacturer’s warranty and lifetime customer support for this product..

Check Stock

SKYXIU Digital Tablet Oscilloscope,with 2 Channel Handheld Multifunction Oscilloscope,100Mhz Bandwidth,1GSa/s Sampling Rate 7\ TFT LCD Touch Screen(1013D Plus)

...module,can tolerate a continuous voltage of up to 400V.Built-in 6000mAh high-performance lithium battery,can be used continuously for 4 hours after fully charged.(Note：Before use,please read the manual attached to the product. If you have any questions,you can contact us.).
【MULTIFUNCTION OSCILLOSCOPE】This lab oscilloscopes with powerful waveform picture manager supports thumbnail browsing,viewing,detailed viewing,page turning,deletion and waveform zoom in,zoom out,move,etc.Equipped with a USB interface,it can be connected to a computer to share screenshots with the computer, which is convenient for secondary analysis..
【MEASUREMENT RANGE】This tablet oscilloscope has High measurement voltage range,1X can measure 0 ~ 40 V,10X can measure 0 ~ 400Vm,100X can measure 0 ~ 4000V.Up to 12 parameters measurement：VPP，VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty,Duty-Time,Time-,Period..

Check Stock

Brady BMP21-LAB Handheld Label Printer

Includes BMP21 LAB Handheld Label Printer, M21 750 7425 Label Cartridge, and Quick Start Guide.
Handheld label maker capable of creating multi line labels for clear identification of laboratory equipment including slides, tubes, flasks, beakers, bottles and more.
Built in label templates with mathematical symbols makes labeling easy and efficient.
Labeling keyboard contains letters A to Z and numbers 0 to 9, and paired with LCD text display for easier, more efficient labeling.
Prints text in single color and in 6 different text sizes ranging from 6 point to 40 point.

Check Stock

Goupchn 500Mhz Oscilloscope Clip Probe 10x P6500B High Precision with Adjust Tool Accessory Kit

Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
P6500B probe is a 500MHz oscilloscope probe with a switch for 10x attenuation. It is a good oscilloscope accessory and suitable for BNC interface oscilloscopes..
Probe can be used in professional test equipment. It has a 1.3m cable with standard BNC end. It has stable performance and provides several accessories. Adjustment tool can adjust compensation capacitance to match oscilloscopes. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
Package include: 1 x probe, 8 x marker rings, 1 x ground wire, 1 x retractable hook tip, 1 x adjustment tool, 1 x ground spring, 1 x BNC adapter..
Warranty: Hope you can be satisfied with our oscilloscope probes. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us..

Check Stock

Passive Attenuator, 1.053M Input Res HT201 Converter Passive Attenuator 20:1 Passive Oscilloscope Signal Attenuator for Inductive Signal Primary Ignition, Automotive Diagnostics Use

20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.

Check Stock

MTR Designs Spike Ferrofluid Display

Includes 7ml of the highest quality ferrofluid available (lab synthesized by Ferrotec) won't break down in a few weeks like cheaper competitors.
Hand made in the US from the highest quality materials.
Beautiful silver anodized aluminum enclosure.
The ULTIMATE gift for the inquisitive mind!.
Includes super strong N52 handheld magnet for interaction.

Check Stock

RIZE Spinning Ferrofluid Display with Black ferrofluid

Mesmerizing Interactive Magnetic Liquid Desk Display.
Contains 7ml of lab synthesized high quality Ferrofluid.
Place the sculpture on its magnetic base and watch the liquid spike, spin around and rise up the large center screw.
Includes handheld magnet for interaction.

Check Stock

Hoptech Bottle Ferrofluid Magnetic Liquid Display Toy

Mesmerizing interactive magnetic liquid desk display.
Contains 7ml of lab synthesized high quality BLUE ferrofluid.
Place the sculpture on the magnetic base and watch the fluid spike, spin around and rise up to the top.
Includes handheld magnet for interaction and LED light.

Check Stock

SIGLENT SPL2016 16-channel Logic Analyzer Probe for SIGLENT SDS2000X

Logic Probe for SDS2000 series , 16-channel, 500MSa/s.
Adds 16-channel digital input capability to Siglent SDS2000X, SDS2000XP and SDS5000X oscilloscopes.
Firmware license key required for operation (sold separately).

Check Stock

Micsig Oscilloscope AC/DC Current Probes with Standard BNC Interface CP2100

Maximum measurable current：100Apk（70Arms）.
Overload indication：Buzzer beeps, Light flashes.
Compatible with all BNC-connected oscilloscopes, adapters can also work with multimeters..

Check Stock

AEMC 5000.14 115V Power Cord for Micro-ohmmeters, Megohmmeters, Power Instruments, Oscilloscopes and Ground Testers

Power Cord 115V for Micro-ohmmeters, Oscilloscopes.
Power cord 115V for Megohmmeters, Power Instruments.

Check Stock