Top Kapton Covered Reviews

2 Inch Car Speaker Tweeter - Heavy Duty 700 Watt High Power Super Titanium Audio Tweeter System w/ Die Cast Aluminum Frame, 2kHz-25 kHz Frequency, 112 dB, 4-8 Ohm, Crossover Capacitor - Pyle PDBT78

  • ...omplete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 4-8 OHM IMPEDANCE: This car tweeter has 112dB/w/m sensitivity and 4-8 ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 2” KAPTON VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 2 inches super titanium car audio tweeter speaker with 2” high-temperature Kapton voice coil. Additional feature includes mylar crossover capacitor.
  • 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. Also, feature a diamond chrome cutting finish & die-cast aluminum frame. Easy to install to your vehicle’s sound system w/ 3” mounting depth.
Check Stock

Replacement Speaker Voice Coil - High-Temperature Ferro Fluid Enhanced Kapton Voice Coil For PylePro 3'' Titanium Super Bullet Tweeter PDBT58 Model - Pyle PDBT58

  • 3'' Titanuim Diaphram Super Tweeter - 100 oz. Magnet.
  • 500 Watts RMS / 1000 Watts Peak - 3’’ High Temperature Kapton Voice Coil.
  • Ferro Fluid Enhanced Voice Coil - Mylar Crossover Capacitor Included.
  • Sensitivity: 109dB - Frequency Response: 2kHz~25kHz.
  • 4-8 ohm Impedance - 5'' Diameter - 2'' Mounting Depth.
Check Stock

5Core 6″ inch Subwoofer Replacement Pair DJ Speaker Car Subs Audio 900W PMPO PP Cone Red, 4 Ohm, 8oz Magnet WF 672 PP 2PCS

  • 6″ 4-Ohm Car Subwoofer. Peak Power Handling: 300 Watts. CEA Rated RMS Power Handling: 30 Watts 1″ High-Temperature CCAW Voice Coils Kapton Paper Wound with 100% Copper Wire. Voice coil with High-Quality Precision copper available in Kapton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
  • 8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
  • Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
  • Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
  • 5 Core uses highly adhesive in the assembly of the Speake....
Check Stock

Audiopipe Car Audio Package with 4 8 Inch Midwoofer Loudspeakers and 2 3.75 Inch Titanium Pro Tweeters

  • PACKAGE: Audiopipe package includes 4 APMB-8SB-C 8-Inch 250-Watt Low Mid Frequency Loudspeaker and 2 ATR-3721 3.75-inch 350-Watt Titanium Pro Tweeters.
  • LOUDSPEAKER POWER: 250-watt peak power, impedance of 8 ohms, input sensitivity of 99 dB, and frequency response range 350-5000 Hz.
  • LOUDSPEAKER DESIGN: 8-inch cone in steel basket, 20-ounce magnet, with mounting depth at 2.875-inches, and 1.5-inch high temperature Kapton voice coil.
  • TWEETER POWER: 350-watt peak power, impedance of 4-8 ohms, input sensitivity of 99 dB, and frequency response range 2k-25kHz.
  • TWEETER DESIGN: 3.75-inch aluminum horn with 1-inch titanium super bullet tweeter with diamond chrome cutting finish, 20-ounce magnet, Ferro fluid enhanced voice coil, and 1-inch high temperature Kapton voice coil.
Check Stock

Warp Pro – 3D Printer Bed Adhesive Aerosol Glue Spray – Fix 3D Print Warping - No More Glue Sticks - Spray on, Water Washable, Adhesive Solution for All Filament 3D Printer Build Plates

  • Firm Adhesion and Quick Release: Firmly adheres prints to print beds, quickly and easily releases finished prints..
  • 3DLAC aerosol spray is the perfect substitute for Kapton tape, blue tape and other types of 3d printing adhesives. Works on glass, PEI, BuildTak, Kapton, and other common print bed surfaces..
  • Works with PLA, ABS, PETG, HIPS, Nylon, Carbon Fiber, TPU, and other materials..
  • Cost efficient printing - 400ml Aerosol spray (13.52 fl oz).
Check Stock

Car Vehicle Subwoofer Audio Speaker - 8 Inch Blue Injection Molded Cone, Blue Chrome-Plated Steel Basket, Dual Voice Coil 4 Ohm Impedance, 600 Watt Power, for Vehicle Stereo Sound System - Pyle PLBW84

  • ...ill maximize sound quality while minimizing noise and distortion.
  • 60 OZ MAGNET STRUCTURE: Built with 60 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 83.5dB to resonate perfect clarity.
  • 1.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 1.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 4.28” MOUNTING DEPTH: Easy to install w/ 4.28" mounting depth & 8.8" overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker's mechanical stability, increasing the life of the speaker.
  • Blue Injection Molded Cone - Flat Progressive Spider - 600 Watt Max Power Handling - Mounting Depth: 4.28''.
  • Non-Fatiguing Big Rubber Suspension - New Wave-Like Rubber Gasket - Impedance:4 Ohm (Per Coil).
Check Stock

5 CORE 6″ Inch Subwoofer Car Audio 300W Peak Power Sub Woofer Loudspeaker Wide Range High Power Bass Surround Sound Stereo 4 Ohm, 8oz Magnet Car Speakers with PP Cone Red, WF 672 PP

  • 6″ 4-Ohm Car Subwoofer. Peak Power Handling: 300 Watts. CEA Rated RMS Power Handling: 30 Watts 1″ High-Temperature CCAW Voice Coils Kapton Paper Wound with 100% Copper Wire. Voice coil with High-Quality Precision copper available in Kapton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
  • 8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
  • Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
  • Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
  • 5 Core uses highly adhesive in the assembly of the Speake....
Check Stock

Car Vehicle Subwoofer Audio Speaker - 12 Inch Blue Injection Molded Cone, Blue Chrome-Plated Steel Basket, Dual Voice Coil 4 Ohm Impedance, 1200W Power, for Vehicle Stereo Sound System - Pyle PL1290BL

  • ... will maximize sound quality while minimizing noise and distortion.
  • 90 OZ MAGNET STRUCTURE: Built with 90 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 85dB to resonate perfect clarity.
  • 2.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 2.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air.
  • CHROME-PLATED STEEL BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated steel basket.
  • 7.12” MOUNTING DEPTH: Easy to install w/ 7.12" mounting depth & 12.20" overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker's mechanical stability, increasing the life of the speaker.
  • Powerful vehicle subwoofer with 12-inch injection-molded cone woofer.
  • 2.5-inch high-temperature dual Kapton voice coil and flat progressive spider.
  • Specially treated rubber edge suspension with rubber magnet boot....
Check Stock

Lanzar MAXP154D MaxPro Series Small 4Ω Dual Subwoofer (15', 2,000 Watts)

  • 1000 WATT POWER: This car subwoofer has 1000 Watt peak power that will produce high sound resonance. It also has 65 + 65 oz. heavy double stacked magnet structure, golden input terminals and dual 4 Ohm impedance.
  • WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation. The overall diameter is 12.09".
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time.
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 2” dual layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 90.0dB and a special designed rubber magnet boot.
  • 6.42” MOUNTING DEPTH: Easy to install with its 6.42” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual.
Check Stock

6 Car Audio Speaker Subwoofer - 300 Watt High Power Bass Surround Sound Stereo Subwoofer Speaker System w/ Molded P.P Cone 86 dB 4Ohm 40 oz Magnet,1 inch KAPTON Voice Coil - Pyramid PW677X

  • 300 WATT POWER: This high powered subwoofer system has a maximum power output of 300 watt peak power / 150watt RMS for full range surround stereo....
  • BUILT TO LAST: Features new design injection molded P.P. cone and specially treated black rubber edge suspension in a chrome finish basket. Bumped /....
  • 4 OHM IMPEDANCE: The audio projection subwoofer has 86 dB and 4 ohm impedance rating that compensates the undersized wire found in many of today’s....
  • 1" KAPTON VOICE COIL: This complete subwoofer features 40 oz magnet structure and 1 inch KAPTON voice coil to enhance its performance and can handle....
  • 6" STANDARD SIZE: Pyramid easy to mount car speaker follows the standard size for most vehicle stereo systems. It has a 2.89" mounting depth and 6.50"....
Check Stock

Lanzar 12in Car Subwoofer Speaker - Black Non-Pressed Paper Cone, Stamped Steel Basket, 4 Ohm Impedance, 1000 Watt Power and Rubber Suspension for Vehicle Audio Stereo Sound System - MAX12

  • 1000 WATT POWER: This car subwoofer has 1000 Watt peak power that will produce high sound resonance. It also has 65 + 65 oz. heavy double stacked magnet structure, golden input terminals and 4 Ohm impedance.
  • WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation. The overall diameter is 12.09".
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time.
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 2” 4 layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 91.9dB and a special designed rubber magnet boot.
  • 6.42” MOUNTING DEPTH: Easy to install with its 6.42” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual.
Check Stock

10 Inch Car Subwoofer Speaker - 300 Watt High Powered Car Audio Sound Component Speaker System w/ 1.5 Inch Kapton Bobbin Voice Coil, 8 Ohm, 25 oz Magnet, Cloth Edge Suspension - Pyramid WH10

  • 300 WATT POWER: This high powered audio projection subwoofer system has a maximum power output of 300-watt peak power / 150 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • CLOTH EDGE SUSPENSION: The high-performance car woofer speaker has a cloth edge suspension that completes your woofer enclosure system. Features 4.50” mounting depth for easy installation.
  • 1.5” KAPTON VOICE COIL: This car speaker has a 1.5” Kapton bobbin voice coil and 8 ohms impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 10 INCH PAPER CONE: Pyramid follows the standard size for most car stereo systems & created this 10" high powered paper cone driver perfect for new speaker construction, replacing worn or blown speakers in your favorite loudspeaker cabinet.
  • 25 OZ MAGNET STRUCTURE: The subwoofer speaker has a 25 oz magnet structure. The heavy-duty housing provides a strong foundation. Also super easy to install to your vehicle's sound system. Provides excellent replacement woofer for sound & music systems.
Check Stock

Lanzar 12in Car Subwoofer Speaker - Black Non-Pressed Paper Cone, Stamped Plastic Basket, Dual 4 Ohm Impedance, 1600 Watt Power and Foam Edge Suspension for Vehicle Audio Stereo Sound System - MAXP124D

  • 1600 WATT POWER: This car subwoofer has 1600 Watt peak power that will produce high sound resonance. It also has 80 + 80 oz. heavy double stacked magnet structure, hex key input terminals and dual 4 Ohm impedance.
  • FOAM EDGE SUSPENSION: Made with a specially treated foam edge suspension to keep equipment safe. Designed with bump & vented motor structure for durability easy installation..
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time.
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 2.5 dual-layer high-temperature Kapton voice coil to resist corrosion. It has a stamped plastic basket as well, with a sensitivity of 89dB and a specially designed rubber magnet boot.
  • 5.76 MOUNTING DEPTH: Easy to install with its 5.76 mounting depth and fits most audio systems for cars, boats or RVs. Included are the necessary cables, installation template and manual.
Check Stock