Top K Tool International Fan Reviews

K Tool International 50 Ton Blue Air Hydraulic Truck Jack HD KTI63198

• [50-TON CAPACITY] - K tool International service jack rated to lift up to 50 tons or 100,000 lbs..
• [LIFTING RANGE] - K Tool 50 ton jack has a lifting range from 11.4" to 21.25". Service Jack provides the opportunity for many automotive/truck needs..
• [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
• [LONG PUMP HANDLE] - Long pump handle with release knob. Works independently of handle position. Handle locks in both vertically at 45 degree angle and horizontally..
• [NARROW WIDTH] - Truck jack narrow width allows jack to fit between tandem wheels..

MSR Expedition Field Service Kit for Camping and Backpacking Stoves, All Whisperlite Stoves

• Each kit includes: Jet & Cable Tool, O-Rings, Pump Cup oil, Safety Pin, Pump Seal, Air Tube, Fuel Tube and Filter, Shaker Needle, Fuel Tube Bushing, Check Valve Spring, Pump Cup, Check Valve Ball, Check Valve Plug, Check Valve Assembly, Jet Cleaning Wire.
• WhisperLite Service Kit also Inlcudes: Priming Wick, WhisperLite G Jet, WhisperLite International G Jet, WhisperLite International K Jet, WhisperLite International/Universal UG Jet, WhisperLite International/Universal UK Jet, WhisperLite Universal UC Jet.

Enclosed Smart Ceiling Fan with Light, Mini 10 Inch Ceiling Fan Bulb for Garage, Tool Room and Store Room, E26 Upgraded Cooling Ceiling Light with Fan

• "On" third, the light and fan will work together.(Attention: our ceiling fan bulb is not compatible with dimmer.) With the remote, dimming, changing color temperature (3000K-6500K) and changing the speed of fan all can be realized..
• ▶Application--Our ceiling fan bulb can be used for garage, tool room and ect. What's more, our fan bulb offer three fan speeds (soft, medium and strong), and you can adjust it with remote to satisfied your need.For example, in summer day, it's very difficult to install the ceiling light fan in garage. However, it's too hot. Our ceiling fan bulb is a good choice. With a lampholder, it can work well..
• ▶Warranty--2-year guarantee is offered. If there is any problem with the bulb, email us via your order. Replacement or refund would be applied under warranty..

K Tool International 63103A 2 Ton Automotive Trolley Floor Jack for Garages, Repair Shops, and DIY, Portable, Compact, 4,000 lbs. Capacity, Hydraulic Lifting Range 5.125" - 13", Heavy Duty Steel, Red

• [2 TON CAPACITY] - K tool International trolley jack rated to lift up to 2 tons or 4,000 lbs..
• [LIFTING RANGE] - K Tool 2 ton trolley jack has a lifting range of 5-1/8" to 13". This trolley jack provides the opportunity for many automotive needs..
• [BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity..
• [DURABLE] - K Tool service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
• [MANEUVERABILITY] - Swivel rear casters and saddle provide smooth maneuvering and positioning.

K Tool International Hydraulic Jack 22 Ton Blue Air Truck Jack HD KTI63194

• [22-TON CAPACITY] - K tool International service jack rated to lift up to 22 tons or 44,000 lbs..
• [TRUCK JACK SPECS] - Minimum Height: 9" (228mm).
• [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
• [BUILT-IN MUFFLER] - Provides built-in muffler to promote quiet operation, High speed turbo motor for efficient effortless operation..
• [STRONG/DURABLE] - Heavy duty truck jack (service jack) has a welded cylinder and reservoir for added strength and durability. The truck jack also has chrome plated rams to resist rust and wear..

Noctua NH-D15S chromax.Black, Premium Dual-Tower CPU Cooler with NF-A15 PWM 140mm Fan (Black)

• Proven premium heatsink (more than 150 awards and recommendations from international hardware websites), now available in an all-black design that goes great with many colour schemes and RGB LEDs.
• Asymmetrical, single-fan design for dual-tower performance with high compatibility: 160mm height fits most tower cases, 65mm RAM clearance, does not block the PCIe slot on most ATX & Micro-ATX boards.
• Renowned, award-winning NF-A15 140mm fan with Low-Noise Adaptor and PWM for automatic speed control: full cooling performance under load, whisper quiet at idle!.
• Includes high-end NT-H1 thermal paste and SecuFirm2 mounting system for easy installation on Intel LGA1700 (LGA17xx family) LGA1200, LGA115x, LGA2011, LGA2066 and AMD AM4 & AM5.
• Renowned Noctua quality backed up by 6-year manufacturer’s warranty, deluxe choice for Intel Core i9, i7, i5, i3 (e.g. 12900K, 12700K, 12600K) and AMD Ryzen (e.g. 5800x3D, 5700X, 5600, 5500).

Cryorig CR-M9PA M9 Plus CPU-Tower-Ventirad - Black

• Proven premium heatsink (more than 300 awards and recommendations from international hardware websites), now available in an all-black design that....
• Extra-wide 140mm dual-tower design with 6 heatpipes and dual fans provides maximum quiet cooling efficiency on a par with many all-in-one....
• Dual-fan design with renowned, award-winning NF-A15 140mm fans with Low-Noise Adaptors and PWM for automatic speed control: Full cooling performance....
• Includes high-end NT-H1 thermal paste and SecuFirm2 mounting system for easy installation on Intel LGA1700 (LGA17xx family) LGA1200, LGA115x, LGA2011,....
• Renowned Noctua quality backed up by 6-year manufacturer’s warranty, deluxe choice for Intel Core i9, i7, i5, i3 (e.g. 12900K, 12700K, 12600K) and....

NOCTUA NH-U12S chromax.Black, 120mm Single-Tower CPU Cooler (Black)

• Proven premium heatsink (more than 200 awards and recommendations from international hardware websites), now available in an all-black design that goes great with many colour schemes and RGB LEDs.
• Slim 120mm size for excellent case, RAM and PCIe compatibility: Fits most tower cases (158mm height), doesn’t overhang the RAM slots, doesn’t block the PCIe on most ATX and Micro-ATX motherboards.
• Renowned, award-winning NF-F12 120mm FocusedFlowTM fan with Low-Noise Adaptor and PWM for automatic speed control: Full cooling performance under load, whisper quiet at idle!.
• Includes high-end NT-H1 thermal paste and SecuFirm2 mounting system for easy installation on Intel LGA1150, LGA1151, LGA1155, LGA1156, LGA2011, LGA2066 and AMD AM4, AM3(+), AM2(+), FM1, FM2(+).
• Renowned Noctua quality backed up by 6-year manufacturer’s warranty, deluxe choice for Intel Core i9, i7, i5, i3 (e.g. 9900K, 9700K, 8700K, 9980XE) and AMD Ryzen (e.g. 3900X, 3700X, 2700X, 2600X).

K Tool International 3.33 Ton Low Profile Service Jack; Dual Pump Piston for Rapid Rise, Long Range Handle, Heavy Duty Steel, Hydraulic Ram Protection; KTIXD63133

• [3.33-TON CAPACITY] - K tool International service jack rated to lift up to 3.33 tons or 6,660 lbs..
• [DURABLE] - K Tool service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
• [LONG PUMP HANDLE]-  50" long pump handle for easy pumping under load.
• [DUAL PISTONS]- Dual pump piston power unit raises saddle to maximum height in 8 full incremental pump strokes with no load.
• [BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity and over extension of ram.

K Tool International KTI63098 Aluminum Service Jack

K Tool International Pry Bar Set, Lady Slipper Style; Ultra- Strength Heavy Duty Heat Treated Steel, Rolling Head Pry Bars (6\

• [PRY BAR SIZES] - K Tool International Pry Bar Set comes with 6'',12'',16'',20'' pry bars. This heavy duty pry bar set will complete all of your leverage needs..
• [ULTRA-STRENGTH] - Pry bar set is made with heat treated steel to proved rolling head with extra durability, strength, and longevity on the job..
• [SUPERIOR QUALITY] - Heat treated steel provides these pry bars with supieror quality to get any job done. K Tool Intnernational pry bars are made for longevity and are resistant to bending, breaking, or corrosion..
• [HIGH LEVERAGE] - Pry bars feature high leverage rolling head with long tapered body to align drift. Rolling heads provide high leverage pivot points for heavy machinery, tables etc..
• [VARIETY OF DUTIES] - Use these rolling head pry bars for many jobs. Align bolt holes on two separate items, wedge pry bar, pull/push seals and bushings into place. Great to move heavy machinery..

SNJ Ceiling Fan with Lights and Remote Control for Living Room,Bedroom and Dining Room,Natural Walnut Finish,52-Inch Indoor Use

• Modern Ceiling Fan : Walnut finish ceiling fan with opal frosted glass shade , led light 3000K/4000K/6500K for option and remote control , ABS blades.
• Remote Control : Control LED light on /off and 3-speed fan as well as the fan timer.
• Variable Motor : You can control the fan speed as your comfortable way by remote.
• LED Light : 15W LED lights 3000K/4000K/6500K.
• Warranty : 10 years for motor and 2 years for all other parts.

Noctua NH-U9S chromax.Black, 92mm Single-Tower CPU Cooler (Black)

• Proven premium heatsink (more than 100 awards and recommendations from international hardware websites), now available in an all-black design that goes great with many colour schemes and RGB LEDs.
• Compact 92mm size for excellent case, RAM and PCIe compatibility: fits most tower cases (125mm height), doesn't overhang the RAM slots, doesn't block the PCIe even on ITX motherboards.
• Renowned, award-winning NF-A9 92mm fan with Low-Noise Adaptor and PWM for automatic speed control: full cooling performance under load, whisper quiet at idle!.
• Includes high-end NT-H1 thermal paste and SecuFirm2 mounting system for easy installation on Intel LGA1700 (LGA17xx family) LGA1200, LGA115x, LGA2011, LGA2066 and AMD AM4 & AM5.
• Renowned Noctua quality backed up by 6-year manufacturer’s warranty, deluxe choice for Intel Core i9, i7, i5, i3 (e.g. 12900K, 12700K, 12600K) and AMD Ryzen (e.g. 5800x3D, 5700X, 5600, 5500).