Top Junction Block Reviews

Waterproof Junction Box Mcredy Waterproof Electrical Junction Box Ip68 Black 4 Way 5.5 Inch Pack of 1

  • Package Content: 1 x Black junction box, 1 x 4-terminal group, 1 x Set of screws.
  • The outdoor junction box are compact junction boxes for exterior use.The screw connector is a standard strip block type..
  • IP68 Weatherproof Junction Boxes: Built-in waterproof flame retardant silicone seal ring, the water tight inlets work well, can be used outdoors , indoors and underground..
  • Junction Box Total Size: 14x8.5x3.67cm/5.51"x3.35"x1.44".
  • The Larger design makes the connection more convenient, no tools required, no welding required, only need to connect the same type of wire together, no cable cutting, more convenient and safer..
Check Stock

Cut by The Foot Wirenco 6/2 NM-B Non-Metallic Residential Indoor Cable with Ground

  • High-Quality Materials >>> The Helunsi junction box can easily be installed under the ground. Made of high quality plastic housing, it will not crack....
  • Waterproof >>> IP68 high waterproof level / Moisture-proof / Dust-proof / Anti-UV, 2 way plastic terminal, it can be installed horizontally and....
  • Specification >>> One in and one out and is delivered with a three-position terminal block. Terminal Block Current: 24A.
  • Easy To Install >>> The joint shell mold is integrally formed with a waterproof layer, the rotaters at each end close up the rubber around the ends of....
  • Wide Usability & After Sales >>> The Helunsi junction boxes are suitable for kinds of LED billboards, LED tunnel lights, LED Road landscape lighting,....
Check Stock

Lemonbest 2 pcs Waterproof Outdoor External 3 way PG9 Gland Electrical Junction Box Underground Cable Line Wires Power Cord Connector Protection

  • PG9 Waterproof IP65 Junction Box, 3 Way Plastic Terminal Strip, Pack of 2.
  • The junction box can easily be installed under the ground. Gives you full protection of the Cable Line. Suitable Cables Diameter: 4-8mm / 0.16-0.31″m. It is applicable to the outdoor lamps,landscape and lanterns connection..
  • Made of high quality plastic, it will not crack or fade in Sunlight, durable for years use..
  • It is used to install outdoor lamps and lanterns connection, wiring is easy to operate, more convenient and safer..
Check Stock

Ampper 4 Terminals Bus Bar, 4.2' Ground Distribution Block Brass Battery BusBar Junction for Car Vehicle Rv Truck Marine Boat Audio Amplifier and More (Black)

  • Heavy Duty: nickle plated brass thick busbar, base is made of heavy ABS material, mechanically strong, insulated, heat resistant and flame resistant, durable made for safety use..
  • Customized Design: 4 stainless M5 terminal stud & nut for easy installation and route your wires with minimal effort..
  • Operation: Max operating voltage 48V DC / 300V AC, Max continuous amperage: 150A AC / 200A DC..
  • Compatible: this brass battery bus bar junction block is widely used for car, vehicle, Rv, truck, marine and boat, audio, amplifier, video, also electrical equipment / appliances..
  • Package Includes: 1 pcs 4 terminals 4.2″ ground distribution brass battery junction block bus bar..
Check Stock

LeMotech ABS Plastic Dustproof Waterproof IP65 Junction Box Universal Electrical Project Enclosure White 7.9 x 6.1 x 3.1 inch (200 x 155 x 80 mm)

  • IP65 Waterproof, it can be installed horizontal and vertical as external junction box to hide electrical connections around your home and any property..
  • The junction box can easily be installed under the ground. Gives you full protection of the Cable Line..
  • Made of high quality plastic, it will not crack or fade in Sunlight, durable for years use..
  • It is used to install outdoor lamps and lanterns connection, wiring is easy to operate, more convenient and safer..
  • Available in 2 way. Terminal Block Current: 17.5A.
  • Terminal Block Voltage: AC 450V. If you want only 1 pack, please refer to ASIN B01IQUQF3Q.
Check Stock

2 Way Power Distribution Block, LAWUZA Connecting Block 0/2/4 Gauge in 4/8/10 Gauge Out Amp Ground Distributor for Auto Car Audio Splitter Amplifier

  • Heavy Duty: nickle plated brass thick busbar, base is made of heavy ABS material, mechanically strong, insulated, heat resistant and flame resistant, durable made for safety use..
  • Customized Design: 6 stainless M4 terminal screws, 2 x 1/4" (M6) socket head cap screws for easy installation and route your wires with minimal effort..
  • Operation: Max operating voltage 48V DC / 300V AC, Max continuous amperage: 150A AC / 200A DC..
  • Compatible: this brass battery bus bar junction block is widely used for car, vehicle, Rv, truck, marine and boat, audio, amplifier, video, also electrical equipment / appliances..
  • Package Includes: 1 pcs 6 terminals 4" power / ground distribution brass battery junction block bus bar with 6 screws and 2 cap screws, 2 pcs installation screws..
Check Stock

Ampper 3/8 Single Stud Battery Junction Posts Block Heavy Duty Power and Ground Junction Block Power Distribution Studs Terminal Kit Pack of 2 Red and Black

  • Function: used to connect two or more connectors / wires, as battery junction post for battery power and ground junction. Very useful for customizing or relocating battery and wires..
  • Easy to install: panel surface install with screw mounting holes for any orientation installation..
  • Fitment: 200 A continuous at DC 12V, fit for max up to DC 48V power distribution stud application..
  • Heavy Duty: nylon construction with stainless steel stud for strength and durability..
  • Compatible: used as battery junction block, for car, vehicle, Rv and boat, also electrical equipment and solar cells etc...
Check Stock

Ampper 5/16' Dual Studs Battery Junction Post, Heavy Duty 2 Studs Bus Bar Power and Ground Junction Block Distribution Terminal Kit, Pack of 2 (Red and Black)

  • Function: used to connect two or more connectors / wires, as battery junction posts for battery power and ground junction. Very useful for customizing or relocating battery and wires..
  • Easy to install: panel surface install with screw mounting holes for any orientation installation..
  • Fitment: 200 A continuous at DC 12V, fit for max up to DC 48V power distribution stud application..
  • Heavy Duty: nylon construction with stainless steel stud for strength and durability..
  • Compatible: used as battery junction block, for car, vehicle, Rv and boat, also electrical equipment and solar cells etc...
Check Stock

InstallerParts Cat.5E Junction Box -- 110 Punch Down Type -- Secure Shielded Outdoor Junction Box -- UL Listed

  • High Quality Design: Secure Outdoor Junction Box Provides Durable Housing For A Cat5E Ethernet Cable.
  • Provides Most Direct Connection Between Two Cat5E Cables..
  • Wire Guage: The 110 Block Is Designed To Use 22 Through 26 Gauge Solid Wire..
  • Compatability: Ethernet Cat5E Junction Box Is 110 And Krone Punch Down Type.
Check Stock

(Red) 12 Terminal Distribution Block -BUSBAR- with Ring Terminals

  • 1/4″ Stud – 12 Terminal Red Power Distribution Block For a Variety Of wiring Scenarios.
  • Includes 12x nylon 16-14 awg #8 1x nylon 12-10 awg 1/4 1x nylon 8 awg 1/4 1x nylon 6 awg 1/4.
  • 12 Stainless Steel #8-32 Terminal Screws and Stainless Stud Will Not Rust Or Corrode In Wet Environments.
  • Use In Automotive Or Marine Environments Where A BusBar Or Junction Block Is Needed.
  • Rated For 180 amps @ 12 vdc = 15 amps / connection & Max Volts = 48 vdc.
Check Stock

JQuad(Pair - Red & Black) 12 Terminal Distribution Block -BUSBARS- with Ring Terminals

  • 1/4" Stud - 12 Terminal Red & Black Power Distribution Block For a Variety Of wiring Scenarios.
  • Includes 12x nylon 16-14 awg #8 1x nylon 12-10 awg 1/4 1x nylon 8 awg 1/4 1x nylon 6 awg 1/4.
  • 12 Stainless Steel #8-32 Terminal Screws and Stainless Stud Will Not Rust Or Corrode In Wet Environments.
  • Use In Automotive Or Marine Environments Where A BusBar Or Junction Block Is Needed.
  • Rated For 180 amps @ 12 vdc = 15 amps / connection & Max Volts = 48 vdc.
Check Stock

LRONG Round Speaker Terminal Cup 4PCS Round Express Spring Clip Double Binding Post Screw Wire Car Subwoofer Speaker Wire Terminal Connector WP2-9

  • Package content: 4PCS round speaker junction boxes to meet your needs..
  • Product size: panel diameter 2.2in, mounting hole diameter 1.9in, thickness 0.8in..
  • Application range: suitable for 2.1 small speakers, surrounding boxes, center boxes, small bookshelf boxes and other small speakers..
  • The junction box is often installed on the back of the speaker shell as a connection box between the power amplifier and the speaker, with a two-digit one positive and one negative clamp..
  • Loudspeaker terminal box, terminal block, terminal clamp, terminal post, the box behind the box shell to connect the power amplifier line..
Check Stock

Emerson H06F 36 Universal Junction Block Thermocouple 36 inch

  • 36 inch junction block thermocouple with energy cut-off.
  • Stainless steel element construction for prolonged thermocouple life.
  • Standard coaxial thermocouple 11/32 inch double lead thread.
  • Universal adapter fittings included with each kit for replacing thermocouple in most types of pilot burners.
  • Works for both LP and natural gas applications.
Check Stock