Top Joining Adhesive Reviews

12/Pk 3M Adhesive Transfer Tape 467MP, Clear, 1/2 in x 60 yd, 2 mi

  • 2 mil nominal adhesive tape delivers exceptional shear strength for metals and HSE plastics.
  • Provides very high resistance to solvents and humidity.
  • Special PCK layflat liner for increased dimensional stability in high humidity storage, processing, shipping and application conditions.
  • 4.2 mil PCK layflat liner virtually eliminates curling, buckling and rippling.
  • 200MP acrylic adhesive is considered the industry standard for graphic attachment and general industrial joining applications.
Check Stock

3M Fastbond Contact Adhesive 30NF, Neutral

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other.
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range.
  • Adhesive can be applied by spray, brush or roller.
  • Bonding, adhering, gluing, joining and attaching.
  • Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range.
Check Stock

JVCC FELT-08 Polyester Felt Tape [3mm thickness felt]: 3/4 in. x 10 ft. (Black)

  • JVCC FELT-08 Polyester Felt Tape is a 3mm thick synthetic needle punched felt made from polyester fibers..
  • One side is felt, and the other side has adhesive. Commonly used for joining and temporarily repairing fabric, curtains and cloth drapes in backdrops..
  • Felt material is also used for filtration applications, gaskets, wipers, and padding in a wide variety of industries..
  • JVCC FELT-08 hides seams being photographed and is used for applying a clean, dark edge to platforms, flats, and portals. Can also be used to create matte borders or edges and to line display and jewelry cases..
  • Carrier/Backing: polyester felt. Adhesive: synthetic rubber. Release Liner: paper (reverse wound). Thickness: 128 mils (carrier, adhesive, liner) 118 mils (carrier, adhesive) 10 mils (liner). Adhesion: 130 ounces per inch (to stainless steel test panel). Service/Operating Temperature: -30F to 150F. Application Temperature: 60F (minimum). Core: 3-inch diameter..
Check Stock

3M Fastbond Contact Adhesive 30NF, Neutral, 1 Quart Can

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other.
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range.
  • Adhesive can be applied by spray, brush or roller.
  • Bonding, adhering, gluing, joining and attaching.
  • Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range.
Check Stock

3M Fastbond Contact Adhesive 30NF, Green, 1 Gallon Can

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other.
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range.
  • Adhesive can be applied by spray, brush or roller.
  • Bonding, adhering, gluing, joining and attaching.
  • Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range.
Check Stock

GTSE Aluminum Foil Tape, 4 inches x 55 Yards (164 ft), Silver Metal Tape, Strong Adhesive, 1 Large Roll

  • PACKAGE CONTAINS: 1 roll of heavy duty, adhesive aluminum foil tape.
  • QUALITY PRODUCT: GTSE aluminum foil tape performs consistently over a wide temperature range (+5°F to +158°F). A high tack acrylic adhesive creates an air tight, waterproof seal on application..
  • VERSATILE: Can be applied in most weather conditions and easily conforms to irregular surgaces. Flame, water and UV resistant..
  • APPLICATION: Perfect for joining and sealing insulation, repairs, ducting and pipework..
Check Stock

3M Scotch-Weld Epoxy Adhesive DP100 Plus Clear, 1.69 oz (Pack of 1)

  • Provides high sheer and peel strength for reliable bonding.
  • Clear formula provides a clean bond line.
  • Meters and mixes as it dispenses, maximizing adhesive work-time.
  • Effective system for bonding, joining, gluing, attaching, assembling, encapsulating, potting, and sealing applications.
  • Very flexible adhesive formula provides strong, permanent bond even under vibration and impact.
  • Expands and contracts under changing environmental conditions.
  • Provides handling strength in approximately 15 minutes at room temperature.
  • Flexible when cured, making it a good choice for bonding dissimilar surfaces.
Check Stock

Herco Neoprene Rubber Contact Adhesive - 1/2 Pint

  • Herco air drying contact adhesive sets up quickly and bonds permanently.
  • Provides long bonding range and high initial strength without clamping.
  • Ideal for bonding, adhering, gluing, joining and attaching surfaces.
  • Meets requirements of MMM-A-121, MMM-A-130B, and A-A-1936A.
  • Convenient screw-top with applicator brush.
Check Stock

Herco Neoprene Rubber Contact Adhesive - 1/3 Pint

  • Herco air drying contact adhesive sets up quickly and bonds permanently.
  • Provides long bonding range and high initial strength without clamping.
  • Ideal for bonding, adhering, gluing, joining and attaching surfaces.
  • Meets requirements of MMM-A-121, MMM-A-130B, and A-A-1936A.
  • Convenient screw-top with applicator brush.
Check Stock

Clear Parts Cement-1oz

  • Specially formulated for joining all polystyrene plastics.
  • Can even be used to make small windows for model cars and planes.
  • Will not craze plastic, does not yellow, leaves no unsightly residue, and can easily be cleaned up with water.
  • Contains one 1-fl.oz. bottle of Clear Parts Cement adhesive.
Check Stock

Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 12\ x 12\ (5-Pack)

  • Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications..
  • High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range..
  • Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required..
  • Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface..
  • Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds..
Check Stock

Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 10\ x 10\ (5-Pack)

  • Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications..
  • High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range..
  • Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required..
  • Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface..
  • Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds..
Check Stock

3M 4910 Clear Double Sided General Purpose Acrylic Tape, 0.5" Diameter Circles (roll of 250)

  • Tape Strips: heavy-duty tape eliminates drilling, grinding, welding, screwing, and refinishing associated with bonding materials. Clear acrylic creation of the tape makes it perfect for joining transparent materials.
  • Adhesive Tape: permanent bonding tape has an exceptional strength and can be used to replace rivets, screws, spot welds, and messy liquid adhesives. Continuous bonding feature distributes the stress over the entire surface for best results.
  • Utility Range: 3M clear tape is ideal for heavy-duty applications, such as bonding glass, door, street signs, etc. Virtually invisible adhesive tape covers rivet head, weld mark, and glass crack leaving negligible trace to create a smooth surface.
  • Resistance: this clear acrylic tape is resistant to UV light, moisture, solvents, and chemicals, ensuring perfect sealing and bonding even in extreme environments. It also resists high-range, hot, and cold temperature cycling.
  • Product Details: 0.040 in. thick, 0.5″ diameter circular tape shape with pressure sensitive adhesive bonds almost instantly with no drying time.
Check Stock