Top Job Design Reviews

WORKPRO Low-Profile Car Creeper, 36-Inch with 6 Wheels – Heavy-Duty Construction, Smooth Maneuverability, Plastic Mechanic Creeper with One-Piece Design and Padded Headrest, Easy to Clean (W111001)

  • MECHANICS CREEPER – Whether you’re a mechanic or a DIYer, you can use this WORKPRO heavy-duty plastic creeper to gain access to the underside of a vehicle to perform maintenance or inspection.
  • SMOOTH MANEUVERABILITY – This plastic car creeper has six ball-bearing nylon castors for the smoothest maneuverability to help you get the job done efficiently. Plus, the contour design has two tool holding bins built into the sides.
  • PADDED HEADREST – The padded headrest and body-fitting design allows for optimum comfort while this automotive creeper is in use.
  • EASY TO CLEAN – The plastic body is oil and solvent resistant. It’s easy to clean so you can start fresh with each job.
  • ONE PIECE DESIGN – To do the best possible job time and time, this low-profile creeper has a heavy-duty one-piece design that provides maximum durability and performance.
Check Stock

ZaraApex Pancake Air Compressor,3 Gallon, 100 PSI Portable Electric Oil Free Air Compressor

  • Quiet Series design at only 60 dB for operator and crew comfort.
  • Runs at a lower RPM (1,750) resulting in longer motor and pump life.
  • Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments.
  • Oil-free dual-piston pump designed for maintenance-free operation.
  • Lightweight design for increased job site portability.
Check Stock

Bon-Aire Craftsman 75120 12V Portable Inflator, 6.4 pounds

  • Quiet Series design at only 58 dB for operator and crew comfort.
  • Runs at a lower RPM (1, 750) resulting in longer motor and pump life.
  • Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments.
  • Oil-free dual-piston pump designed for maintenance-free operation.
  • Efficient 1/2 HP induction motor provides .7 CFM at 90 PSI with a maximum tank pressure of 135 PSI.
  • Lightweight design for increased job site portability.
Check Stock

Makita MAC5200R 3.0 HP Air Compressor (Renewed)

  • Quiet Series compressor design at only 58 dB for operator and crew comfort.
  • Compressor runs at a lower RPM (1,750) resulting in longer motor and pump life.
  • Complete roll-cage construction provides the compressor with protection to withstand a variety of job-site, transporting, and storage environments.
  • Oil-free dual-piston pump designed for maintenance-free operation.
  • Compressor features a lightweight design for increased job site portability, an oil-free dual-piston pump designed for maintenance-free operation, and a cord wrap for convenient AC power cord storage.
Check Stock

Makita MAC210Q Quiet Series, 1 HP, 2 Gallon, Oil-Free, Electric Air Compressor

  • Quiet Series design at only 60 dB for operator and crew comfort.
  • Runs at a lower RPM (1, 750) resulting in longer motor and pump life.
  • Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments.
  • Oil-free dual-piston pump designed for maintenance-free operation.
  • Lightweight design (only 44 lbs.) for increased job site portability.
Check Stock

45 Acp Because Sometimes Short Fat And Slow Will Do The Job T-Shirt

  • 45 Acp Because Sometimes Short Fat And Slow Will Do The Job. Funny Best Gift Idea Gun Gun Rights Design by Woormle, Veteran Soldier Veteran Patriotic Military Warrior Tee..
  • .45 ACP because sometimes short, fat and slow will do the job design by woormle for gun lovers Makes perfect birthday or Fathers day Mothers day gift for veteran patriotic military.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Makita MAC320Q Quiet Series 1-1/2 HP, 3 Gallon, Oil-Free, Electric Air Compressor

  • Quiet Series design at only 60 dB for operator and crew comfort.
  • Runs at a lower RPM (1,750) resulting in longer motor and pump life.
  • Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments.
  • Oil-free dual-piston pump designed for maintenance-free operation.
  • Lightweight design for increased job site portability.
Check Stock

Makita LS0815F Slide Compound Miter Saw

  • Compact and Lightweight Design for Job Site Portability.
  • Powerful 10.5 AMP direct drive motor requires less maintenance and delivers 5,000 RPM.
  • Miters 0-50 Degrees left & 0-60 Degrees right, with positive stops at 0, 15, 22.5, 31.6, 45 and 50 Degrees (left and right) plus 60 Degrees (right).
  • Compact and lightweight (31.1 lbs.) for job site portability.
  • Cuts up to 12" at 90Degrees and 8-1/2" at 45Degrees.
Check Stock

The Texan York Nut Sheller – One Nut Cracker, Tempered Steel Pack of 1

  • SIMPLICITY: The simplest tool for a job is the best. Meet the Texan “York” Nut Sheller, a nut sheller that exudes simplicity.
  • PERFORMANCE & DURABILITY: Tempered steel built for a specific purpose without any embellishments or unnecessary extras.
  • EASY OPEN DESIGN: The design enables you to crack most nuts with ease with a process made much simpler than with most conventional crackers.
  • LITTLE FORCE NEEDED: A simple applying of pressure will do the job without the need for a power socket.
  • ELEGANCE: The Texan York Nut Sheller fulfills your needs – simply and elegantly.
Check Stock

Dewalt D55146 1.6 Hp Continuous 200 Psi, 4.5 Gallon Compressor, 17' x 33.75' x 24.5'

  • Quiet Series design at only 58 dB for operator and crew comfort.
  • Runs at a lower RPM (1, 750) resulting in longer motor and pump life.
  • Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments.
  • Oil-free dual-piston pump designed for maintenance-free operation.
  • Efficient 1/2 HP induction motor provides .7 CFM at 90 PSI with a maximum tank pressure of 135 PSI.
  • Lightweight design for increased job site portability.
Check Stock

Stark USA 65151 Air Compressor w/Adjustable Pressure 3.5hp 10 Gallon 125PSI Gas Heavy Duty

  • Quiet Series design at only 58 dB for operator and crew comfort.
  • Runs at a lower RPM (1, 750) resulting in longer motor and pump life.
  • Complete roll-cage construction provides protection to withstand a variety of job-site, transporting, and storage environments.
  • Oil-free dual-piston pump designed for maintenance-free operation.
  • Efficient 1/2 HP induction motor provides .7 CFM at 90 PSI with a maximum tank pressure of 135 PSI.
  • Lightweight design for increased job site portability.
Check Stock

Makita WST07 Folding Miter Saw Stand

  • Aluminum tubular design for job site portability.
  • Large solid rubber wheels and side handle allow the stand with miter saw attached to be transported around the job site (miter saw not included).
  • Material support extensions extend to 151" and support up to 500 lbs. for increased cutting efficiency.
  • “Tool-less” adjustable miter saw bracket levers for easier installation/adjustment/removal of saw.
  • Durable aluminum feed roller and adjustable material stop are engineered for efficient repetitive cuts.
Check Stock

DeWALT Portable 4 Gallon Wet/Dry Vaccum, Yellow & Craftsman CMXZVBE38725 1-7/8 in. Dusting Brush Wet/Dry Vac Attachment

  • Product 1: Portable 4 gallon toolbox design makes it convenient to take to any job 4 gallon Poly container.
  • Product 1: Onboard vac accessory storage provides an easy location for all attachments including extension wand storage.
  • Product 1: Powerful 5 peak horsepower motor provides just the amount of suction needed to most any cleanup job. Tank Size - 6 gallon.
  • Product 1: Ultra-flexible hose extends up to 7' To reach almost any job.
  • Product 2: VERSATILE CLEANING Helps clean intricate surfaces indoors outdoors and inside cars.
  • Product 2: PERFECT FOR STUBBORN DEBRIS Captures wood chips metal shavings dust and other small particles.
  • Product 2: IDEAL FOR DETAIL CLEANING Bristles of the vacuum cleaner brush attachment get into crevices and fine materials.
  • Product 2: MANEUVERABLE 1-7/8 in shop vacuum accessories are designed for a great blend of maneuverability and airflow.
Check Stock