Top Jessem Router Lift 2 Reviews

JessEm 02120 Mast-R-Lift II Router Lift with Top Plate and 10-Piece Insert Ring Kit with Caddy for Router Plates and Lift Systems (2 Items)

  • Bundle Includes: JessEm 02120 Mast-R-Lift II Router Lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
  • Built-In Locking Mechanism: Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations.
  • Compatibility: With a standard top plate, Mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system.
  • Sturdy Construction: Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off.
  • Lift Shafts: The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations.
Check Stock

JessEm 02312 Rout-R-Lift II Router Lift for Hitachi M12VC-KM2VC Router Motor

  • The JessEm 02312 Rout-R-Lift II is compatible with the Hitachi M12VC-KM2VC or the .Metabo HPT M12VC router motor only (3.267" Motor Dia).
  • Features a 9-1/4" x 11-3/4" Phenolic insert plate..
  • Insert opening accommodates bits up to 3-1/2" in diameter and receives JessEm's reducing ring inserts..
  • Comes with all mounting and leveling hardware, start pin, hand crank, 3 insert rings (2", 2-1/2", and 1-3/8"), and 1 insert wrench..
  • Additional insert rings available separately..
Check Stock

JessEm ROUT-R-LIFT II ROUTER TABLE PACKAGE for PORTER CABLE/DEWALT/BOSCH

  • JessEm included all you need for a top of the line system which includes the Rout-R-Lift II all new router lift solution..
  • Includes: Rout-R-Lift II (comes with 3 insert rings, 1-3/8'', 2'', 2-1/2''), Mast-R-Fence III (04400), Mast-R-Top (03006), Rout-R-Table Stand (05005),....
  • Compatible with Porter Cable 690/890, Bosch 1617/1618, DeWalt 610/618, Craftsman 17543/17540/28190..
Check Stock

JESSEM Mast-R-Lift Excel II Included Complete Router Table System

  • Includes JessEm Mast-R-Lift Excel II for most cylinder router motors.
  • 32" x 24" phenolic table with aluminum extruded miter track & T-track.
  • Extruded aluminum router table fence with fully adjustable fence faces.
  • Rigid, heavy-duty steel stand with upper and lower stretchers.
  • Optional Digital Readout Attachment and Pow-R-Tek Remote Power Switch not included.
Check Stock

JessEm 02310 Rout-R-Lift II Router Lift with Microjig Grr-Ripper 3D Pushblock Bundle (2 Items)

  • BUNDLE INCLUDES: JessEm Rout-R-Lift II Router Lift with Microjig GRR-Ripper 3D Pushblock.
  • COMPATIBILITY: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.
  • DOUBLE-SEALED BALL BEARING: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.
  • LIFT SHAFTS: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.
  • STURDY CONSTRUCTION: All the machined components on the Rout-R-Lift II are CNC machined for durability.
Check Stock

JessEm 02120 Mast-R-Lift II Router Lift, Table and Fence Package

  • Package includes JessEm 02120 Mast-R-Lift II, 03006 Mast-R-Top, and 04010 Mast-R-Fence II..
  • Table dimensions: 24 x 32 in. with 9-1/4 x 11-3/4 in. opening for lift..
  • Table features an extruded aluminum track with a t-slot for standard 1/4-in. hex head bolts or hex nuts and a standard 3/4-in. miter slot..
  • Fence features a dual track fastening system with adjustable scales that can be set for a zero-reference and fast, repeatable set-ups.
  • JessEm's unique fence face shimming bars that allow for 1/32 and 1/16 in. offset.
  • and a dust port that will fit 2-1/4 and 2-1/2 in. hose fittings..
  • Mast-R-Lift II accommodates the following fixed base routers: Porter Cable 690/890/7518, Bosch 1617/1618, DeWalt 610/616/618, Craftsman 17543/17540/28190, Makita 1101, Hitachi M12VC,/KM12VC, Milwaukee 5626/5615/5616/5619, Rigid R29302..
Check Stock

Router Table Insert Plate,Router Templates, Trimming Machine Flip Board Woodworking Trimming Machine, Table Insert Plate Aluminum Board Trimming Machine Flip Board for Woodworking

  • 3/4" thick phenolic material will not warp, sag, swell or corrode.
  • 32" wide router table top is 24" front to back with a centered router opening.
  • Rabbeted 9-1/4" x 11-3/4" opening supports most standard router plates and lifts.
  • Extruded aluminum track with 1/4" T-slot and standard 3/4" miter slot.
  • Underside pre-drilled for JessEm router table fences and steel router table stand.
Check Stock

O'skool Router Lift Systems for 3-1/2' Diameter Motors, 9-1/4'' x 11-3/4'' Plate

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use bar to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 1/20,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise centerlines....
Check Stock

Rockler Pro Lift Router Lift - 9-1/4 x 11-3/4 Large Router Plate – Router Lift Kit For Kreg Jessum Woodpecker & Peachtree - Router Lift Systems w/Router Plate Insert Ring & Set of Hex Keys

  • Router Table Lift: Raise your woodworking to a new level with this pro lift router tool. Our Rockler router lift 9.25” x 11.75” plate is ideal for....
  • Adjust The Height: Use the fine adjustment gear to set the final height to within 0.001''. All this is achieved more quickly, more efficiently, and....
  • Fits Most Routers: This woodworking router table works with router motors with a 4.2'' diameter (13.85'' circumference), like the Porter-Cable 7518....
  • Easy Router Bit Changes: Raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments—Snap-Lock....
  • What’s Included? Our pro lift includes (1) Rockler Pro Lift Router Lift, (1) Aluminum router plate (3/8'' thick), (1) Router Ring (1-1/2'' I.D.),....
Check Stock

O'SKOOL Router Lift Systems for 3-1/2" Diameter Motors, 9-1/4'' x 11-3/4'' Plate 5-Piece Insert Ring Kit

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use Cam wheels to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 0.05,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise cent....
Check Stock

Rockler Pro Router Lift 8-1/4 x 11-3/4 Plate – Kit Includes Aluminum Router Plate Insert Ring Set of Hex Keys on Key Chain - Easy to Install Router Lift Systems - Woodworking Router Table

  • Woodworking Router Lift: Two patent-pending features raise the Rockler router table insert plate with lift into a class of its own: ultra-fast....
  • Easy Bit Changes: Raise your router table fast with the Quick-Gear, then down-shift to the precision gear for fine adjustments. Our router table....
  • No Tools To Search For: Push the button to release the insert ring, then wind the Quick-Gear to raise the bit above the router lift table in just....
  • Use The Adjustment Gear: Once the bit is installed, quickly lower it, and click in the insert ring, and use the fine adjustment gear of our lift pro....
  • What’s Included? This Router Lift Kit includes (1) Rockler Pro Lift Router Lift, (1) Aluminum router plate (3/8'' thick), (1) Insert ring (1-1/2''....
Check Stock

SHOUD Router Lift for 65mm Diameter Motors,Woodworking Router Table Insert Plate Lift Base,Max Lift 51mm Woodworking Engraving DIY Tools

  • Router Lift Material:Made of high quality aluminum alloy and stainless steel with plate size approx.240 * 200mm.CNC processing, stainless steel support rod..
  • Router Lifting Mode:manual lifting, equipped with manual lifting lever.Installation screw hole position: 70 * 62mm.Maximum lifting stroke: 51mm (2 inches).
  • Easy to install:Woodworking router table insert plate lift base is equipped with 4 mounting screws, just fix the threaded support rod on the table.
  • Super Lift Stroke:Generally, the more expensive lifting base can only lift 40mm (1.57 inches). This product can be lifted to 51mm (2 inches), 1mm per revolution.
  • Widely Used:Router lift is suitable for workbenches, woodworking handstand electric milling handstand wood, etc. It can clamp the trimming machine with a diameter of 64~66mm..
Check Stock

JessEm 06100 Mite-R-Slide II for Router Tables

  • COMPATIBILITY: The Mite-R-Slide II will fit the JessEm’s Mast-R-Fence II Router Fence and TA Fence.
  • HOW DOES IT WORK: It slides onto the T-slot on the top of the fence which makes set up of the Mite-R-Slide II quick and easy. When you are done with....
  • PRECISION MADE GUAGE: The Mite-R-Slide II Gauge is rotatable 45 degrees to the left. Depending on your project, set the desired angle on the slider....
  • FOUR ACETAL ROLLERS: Four Acetal rollers, each with its own bearings, and each turning on a specially machined stainless steel roller pivot all....
  • GUARD ASSEMBLY: In addition, the Mite-R-Slide II has been equipped with a clear guard mounted to a swing assembly that enables the guard to move with....
Check Stock