Top Jba Long Tube Headers Reviews

Spectra Complete Radiator CU2423

  • To allow room for the occurring thermal expansion, OE clevis pins are included where it is required.
  • To reduce stress on the headers and prevent warping during thermal expansion, stress cuts are made to the side rails.
  • Increased tube wall thickness for durability and longevity.
  • Manufactured with high quality material for extended durability.
  • Subject to aging and endurance testing to validate performance under extreme weather conditions.
Check Stock

Remflex 8053 OBX Exhaust Header Connector Gasket Set of 2 Model 8053 Outdoor&Repair Store

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent.
Check Stock

A-Team Performance - Ceramic Coated Block Hugger Headers - Compatible with LS Swap LS1/LS2/LS6

  • High performance,professionally tigged welds.
  • 3/8" thick machined head flanges for perfect sealing surface.
Check Stock

Remflex 8053 OBX Exhaust Header Connector Gasket Set of 2 Model 8053 Car & Vehicle Accessories / Parts

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent.
Check Stock

Dorman 620-654 Engine Cooling Fan Assembly Compatible with Select Cadillac / Chevrolet / GMC Models

  • To allow room for thermal expansion, Original Equipment (OE) clevis pins are included where it is required.
  • To reduce stress on the headers and prevent warping during thermal expansion, stress cuts are made to the side rails.
  • Increased tube wall thickness for durability and longevity.
  • Redesigned corner brackets to increase unit durability and improve ease of installation.
  • Subject to aging and endurance testing to validate performance under extreme weather conditions.
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

A-Premium Left Exhaust Manifold Kit with Gasket Compatible with Nissan Frontier 2005-2019 Pathfinder 2005-2012 NV1500 NV2500 NV3500 2012-2021 Xterra 4.0L

  • 【Vehicle Fitment】This Exhaust Manifold Kit is Compatible with Nissan Frontier 2005-2019, NV1500/NV2500/NV3500 2012-2021, Pathfinder 2005-2012, Xterra 2005-2015---V6 4.0L.
  • 【Durable Construction】This exhaust manifold set is made of solid metal which can resist heat, cold, warping and corrosion, and restore engine proper operation.
  • 【Reference Number】The A-Premium Exhaust Manifold Kit's reference number: 674-947, 674947, 14002EA210, 14002EA21A. Before placing an order, verify that the part is compatible with your vehicle using the compatibility system..
  • 【Customer Support】1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this exhaust long tube headers is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

Monster Jam Grave Digger The Legends with Re-Crushable Car

  • 1/10 scale 4X4 straight-axle radio control truck delivers rugged performance and scale realism for RC bashers of all skill levels.
  • AX10 transmission with all metal gears, SMT10 tube-frame chassis, AR60 OCP-Axle, 2. 2 MT wheels, and BKT Monster Jam tires.
  • WB8 Wildboar driveshafts, rear sway bar, multiple shock mounting positions, hydraulic ram style steering links, and trailing arm 4-linked suspension.
  • Licensed Grave Digger ‘50s-era panel van body with graveyard paint scheme, chrome Zoomie headers and driver figure with glow-in-the-dark helmet.
  • REQUIRES: 2S LiPo Battery Pack (IC3 connector), Compatible Charger, 4xAA Batteries.
Check Stock

BLACKHORSE-RACING Exhaust Manifolds Automotive Replacement Engine Stainless Clipster Header Manifold Exhaust Gaskets for Chevy Small Block SBC A F G 5.0L 5.7L 6.0L

  • ♐ Designed to fit the Chevrolet Small Block 262, 265, 267, 283, 302, 305, 307, 327, 350 & 400 V8 Engine.Not for 40 ford.
  • ♐ Hugs the block for a closer fit and extra clearance.
  • ♐ Headers features 8-2 light weight design..
  • ♐ Designed to fit many vehicles and not specific to the ones below..
  • ♐ Primary Tube Size: 1 5/8". Number of O2 Sensor Locations: 0.
Check Stock

MakerHawk 6pcs USB to DIP Adapter Converter, Mini USB Female, Micro USB Female, 2.54mm 4p USB Male, USB 2.0 USB 3.0 Female, USB Type B Square Interface Female to DIP PCB Power Breakout Board Module

  • Model number: Mini 5p USB Female Connector, 2.54mm 4p USB Male Connector, USB 2.0 4p Female Connector, USB 3.0 Flat Female Connector, Micro USB Type B Female Connector, USB Type B Square Interface Female Connector.
  • Mini USB to DIP, USB female connector mini 5p patch to DIP, welded adapter board. USB male to Dip, 2.54mm USB 4p to Dip, adapter board has been soldered mobile phone power data cable.USB 2.0 4p female connector to DIP, adapter board has been soldered mobile phone power cable..
  • USB 3.0 flat female connector to DIP module.Micro USB type B female connector to DIP, Mike 5p patch to dip, welding female power adapter. 6. USB type B square interface female connector to DIP adapter board.
  • Type of Pin Headers: three 4-pin Pin Headers, two 5-pin Pin Headers and a 9-pin Pin Header.
  • After-sales Service: We have a strong after-sales service team, as long as you have any questions about the product, we will solve your problem immediately after receiving your email, please click "MakerHawk-US" and click on how to send us an email "Ask a question" email us, looking forward to your inquiry, we will reply you within 24 hours.
Check Stock

SHARKROAD Black 3.0 Exhaust Slip-on Pipes for Harley 2014-Up Sportster Muffler Upgrading,Such as Iron 883 Exhaust, Sportster 1200

  • ✅【GREAT FITMENT ON TOURING】Fit 2017-2023 Harley Touring Models (Include Street Glide,Electra Glide,Road Glide,Road King,Ultra Classic, DON'T FIT TRI-GLIDE).
  • ✅【FIT OEM HEADERS】Only fit 2017-2023 Harley Davidson Touring stock & aftermarket OEM style headers (O.D: 1.75 + 2.5 inch), Not for other diameter headers. Please kindly contact us to avoid any inconvenience..
  • ✅【100% CUSTOMER SATISFACTION】24/7 Customer Service for any questions from you.100% Refund if you don’t like the product..
Check Stock

Glarks 112Pcs 2.54mm Male and Female Pin Header Connector Assortment Kit 100pcs Stackable Shield Header and 12pcs Breakaway PCB Board Pin Header for Arduino Prototype Shield

  • 1. What you get: This kit includes all types of pin headers you need, including 50pcs long needle female pin headers, 40pcs short needle female pin....
  • 2. Material: Insulated plastic, hard metal pin.
  • 3. All Products Spacing: 2.54mm/0.1 inches.
  • 4. Feature: They are the perfect height for clearing the USB-B connector and great for stacking multiple shields.
  • 5. Application: Perfect used for wire connecting in the field of Automotive,electrical appliances and Internet, especially for the computer and....
Check Stock

Mophorn Exhaust Header Stainless Steel Long Tube Exhaust Header Polished Manifold Header For Chevy 283 302 305 307 327 350 400 Long Tube Exhaust Header

  • High-quality Stainless Steel: This exhaust manifold has premium quality, made of high-strength polished stainless steel, through an advanced welding....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. Exhaust header collects exhaust gases....
  • Precise Dimension: Tube Diameter: 1 1/2", Collector Size: 3.00". It has a lightweight design. CNC machine flanges with TIG and MIG welded....
  • Easy to Install & Use: Gaskets and other mounting accessories are included in the package, and exhaust pipes can put more power through the wheels to....
  • Direct Fitment: These headers are compatible with 1966-1987 Chevy/GMC SBC 265-350Ci, Pickup Truck/Blazer/Jimmy 2/4WD, capable of adding instant....
Check Stock