Top Jaguar X Type Upper Radiator Hoses Reviews

MotoAlliance Firestorm Pro UTV Cab Heater Kit for Polaris Ranger 1000

  • SPECS: Heat Output - 13,000 BTU at 0-125 CFM.
  • Heater Box Dimensions 8.4" x 6.9" x 5.3".
  • VERSATILE: Don't loose cab space - tucks nicely under the dash.
  • QUALITY: High-grade radiator hose rated -40 to 120 C.
  • INCLUDES: Defrost duct hoses, vents, connectors, radiator hoses, wiring harnesses, installation hardware and instructions.
Check Stock

Lisle 17300 Flexible Hose Clamp Tool

  • Allows Access to Clamps Difficult to Reach with Other Tools.
  • Radiator hoses, heater hoses, and fuel lines.
  • Expands hard-to-reach flat-band and Mobea-type hose clamps.
Check Stock

MotoAlliance Firestorm Pro UTV Cab Heater Kit for Polaris RZR 1000

  • 2014-2018 RZR XP Turbo (will NOT fit RZR XP Turbo S).
  • SPECS: Heat Output - 14,600 BTU at 135 CFM.
  • Heater Box Dimensions 10" x 4.5" x 11.75".
  • VERSATILE: 360 degree adjustable vents/louvers.
  • QUALITY: High-grade radiator hose rated -40 to 120 C.
  • INCLUDES: Defrost duct hoses, vents, connectors, radiator hoses, wiring harnesses, installation hardware and instructions.
Check Stock

MotoAlliance Firestorm UTV Cab Heater Kit for 2014-2018 Polaris RZR XP 1000

  • will not work with Ride Command or OEM wiper blade kit.
  • SPECS: Heat Output - 13,000 BTU at 0-125 CFM.
  • Heater Box Dimensions 8.4" x 6.9" x 5.3".
  • VERSATILE: Don't loose cab space - tucks nicely under the hood.
  • QUALITY: High-grade radiator hose rated -40 to 120 C.
  • INCLUDES: Thermostat Bypass, defrost duct hoses, vents, connectors, radiator hoses, wiring harnesses, installation hardware and instructions.
Check Stock

Radiator Hose Clamp Pliers Tool - Clamp Tight Wire Tool with 24 Inches Cable - Hose Clamp Removal Tool and Ring Clamp Pliers - Hose Pinch Pliers Type or Flat-band Tools - Wire Long Clip Removal Tool

  • Premium Quality Hose Pliers : Our hose removal pliers mechanic tool is made of high-quality carbon steel with firm grip handles double dipped in rubber for the removal of flat-type or ring-type hose clamp tool, hose removal tool is anti-rust and corrosion-resistant.
  • Application of Hose Grip Pliers: This pinch clamp tool can lose clamps on cars, removes factory spring hose clamp pincer, coolant hose clamps pliers and radiator hoses, automotive clamp allow technicians to access flat hose clamps in hard-to-reach areas.
  • Lock Function of Wire Remover: The hose remover pliers have a ratchet lock that will hold the wire clamp compressed, which can make this hose clamp remover tool a one-handed affair and helps locking pliers mechanism to remove and install metal with ease.
  • Easy Operate Wire Clamp Tool: Radiator hose removal has flexible pipe repair clamp tongs that make the removal and installation of the clip easier, non-slip handles of radiator hose clamp tool assures steady grip, small size makes pliers hose easy to carry.
  • Package Includes - Our automotive clamps tools pack for mechanics includes 1 pieces of flexible hose clamp pliers, pliers size is 3.74 x 8.3 inches (W x L), wire clamps tool is suitable for clamps with a diameter of 0.7 - 2.1 inches..
Check Stock

ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch

  • SAVE COOLANT & SAVE TIME: The ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch is a lifesaver when performing fuel line or coolant maintenance.
  • Easily pinch off cooling hoses instead of losing coolant and it spilling all over engine on certain jobs such as valve cover gasket replacements.
  • No need to drain systems before servicing.
  • Ratcheting jaws allow for automatic locking to save you even more time.
  • EASY TO USE: Simply use the ratcheting mechanism on the pliers to close the jaws and squeeze shut your desired hose.
  • Plier jaws swivel to ensure a complete shut off.
  • 3-IN-1 SET: Package includes (3) pinch off pliers – a small 8-inch (20.3cm) long tool with a 1.5-inch (3.8cm) contact area, 10-inch (25.4cm) long tool with a 1.75-inch (4.4cm) contact area, and 12-inch (30.5cm) long tool with a 2-inch (5.1cm) contact area.
  • VARIOUS APPLICATIONS: Small 8-inch plier works great for pinching off small engine fuel hoses or fragile 1/4-inch (6.4mm) plastic water lines under your kitchen sink.
  • Medium 10-inch and large 12-inch pliers clamp off radiator hoses on coolant recovery tank.
  • This entire set can safely be used on washing machine drain hoses, automotive hose lines, radiator lines, fuel l....
Check Stock

ATPEAM Hose Clamp Pliers Set | 3Pcs Flexible Heavy Duty Hose Removal Tool Hose Pliers Automotive Hose Clamp Tool Used in Any Position | Works on 18mm-54mm Hose Clamps

  • ...set also has durable chromoly vanadium construction..
  • Two Hook Pliers Added: Two hook designs of the hose pliers automotive to fit between various fittings and hoses. Easy to penetrate hardened coolant, oil or any other parts where hose attached . Real-time removal of radiator hoses, transmission lines, heater conduit pipes or any other rubber pipes with fitted joints..
  • Wide Application: The hose clamp tool allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16-inch - 2-1/2-inch (18mm - 54mm).
  • Package Included: The hose removal tool includes 1 x Hose Clamp Pliers.
Check Stock

ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit

  • PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
  • Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
  • FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
  • The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
  • Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
  • BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
  • While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
  • Constructed from opaque yellow hard-plastic components.
  • 3 out of 5 cap adaptors include steel rings to hold the ada....
Check Stock

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....
Check Stock

FEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm

  • ...ter in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • Wide Application: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible for Cadillac, B....
Check Stock

SuperATV Heavy Duty Cab Heater for 2016-2020 Polaris RZR 900 / S 900 | 2015-2018 RZR 4 900 | 2015-2017 RZR 900 XC | Includes Defrost Hoses and Vents | Built-in Shutoff Valve | 3.4 Amps at 13.7 Volts!

  • FITS: 2014-2018 RZR & RZR-4 XP 1000 (XP1K).
  • 2016-2018 RZR & RZR-4 XP1000 (XP1K) Turbo.
  • will NOT work with RZR 1000-s or OEM wiper blade kits.
  • SPECS: Heat Output - 13,000 BTU at 0-125 CFM.
  • Heater Box Dimensions 8.4" x 6.9" x 5.3".
  • VERSATILE: Don't loose cab space - tucks nicely under the hood.
  • QUALITY: High-grade radiator hose rated -40 to 120 C.
  • INCLUDES: Thermostat Bypass, defrost duct hoses, vents, connectors, radiator hoses, wiring harnesses, installation hardware and instructions.
Check Stock

Prokomon 9pc Hose Clamp Pliers, Hose Clamp Remover Kit with Flexible Wire Long Reach Hose Clamp Clic R Type Swivel Jaw and Flat Band Pliers for Automotive Coolant Radiator Heater and Water Hose

  • ◇ Universal hose pliers set --- Includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook.
  • ◇ Durable --- All pliers are made of high quality steel and PVC, heat-treated tools can effectively withstand high hardness extrusion, and black oxide treatment can prevent rust and corrosion..
  • ◇ Locking Design --- The 5 spring-clamp pliers can be locked to keep your fingers free from accidents and injuries, thus freeing your hands and speeding up your repair work. Precision clamps at the end of the flexible cable allow extension to places other models cannot reach..
  • ◇ Wide Range of Applications --- Used for assembly and disassembly of many hoses such as fuel hoses, flexible oil hoses, flexible water hoses, radiator hoses, coolant hoses, etc. This casing clamp tool kit is suitable for plastic and metal hose clamps from 11/16 inch to 2 1/2 inch..
  • ◇ Prokomon --- We pursue excellence in quality and professional technical support. If you are not satisfied with this product or have any questions, please feel free to let us know..
Check Stock

Forney 70487 Tube Brush, Nylon with Wire Loop Handle, 15-1/2-Inch-by-1-1/4-Inch

  • 15-1/2Long x 1-1/4x 5, tube brush loop end.
  • Single stem/single spiral with 005-Inch (127 millimeters) nylon bristles.
  • Ideal for cleaning bottles, hoses and drains.
  • Also great for automotive applications like carburetors, brake cylinders, radiator hoses and engine blocks.
Check Stock