Top Jack Plate Made From Reviews

Ethernet Wall Plate, 1 Port Cat6 Keystone Female to Female Wall Plate - White

  • Completely Assembled Wall Plate – The wall plate and keystones have been assembled already, You can install it in the wall directly. No need to assemble the plate save your time and protect your fingers from getting hurt ..
  • Easy to install – Installs just like any light switch plate, all you need is a standard screwdriver and plug the cable into the front and back.Then connect the cable to your terminals. Standard size 7cm*11.5cm (W*L) wall plate with 2 pcs screws, Removable Cat 6 keystone jack..
  • Convenient usage – This wall port jack is the perfect solution for connecting Router or computer other Ethernet Channel-enabled devices to your other devices..
  • Ethernet keystone is compatible with Cat7 Cat6 Cat5 Cat5e network ethernet cable..
  • Package Contents:1 Port Wall Plate + Cat6 Keystone Jack + 2 x Screws.(Not included Low-Voltage Mounting Bracket)..
Check Stock

Acacia Hardwood Interlocking Deck Tiles - Walnut Straight - 12\×12\ 9pcs - Floor Tiles for Patio and Deck Use Natural Wood Outdoor Decking and Flooring, Rain and Weather Resistant, Heavy Duty

  • ... Kit brings crooked, warped, or bowed flooring strips into place for fixing and holds them in place during installation.
  • Flooring jack laminate jack is not for lifting.
  • [For Any Floor Thickness]: Laminate flooring jack features universal adjustable length from 14 to 16.7 inches (35.5-42.5cm).
  • 13 x 0.9 x 0.6-inch (33 x 2.4 x 1.4cm) rack.
  • 1.1 x 4.25 x 1.9-inch (2.9 x 10.8 x 4.8cm) rack plate.
  • 3.9 x 8 x 0.2-inch (9.8 x 20.3 x 0.5cm) lifting plate.
  • [Easy to Use]: Place flooring wall jack against wall or wall-stud.
  • Use locking ratchet to push or pull flooring strips into place (ratchet downward to force, push lever up or forward to release gear drive mechanism).
  • [Prevent Injury]: Keep hands free when nailing hardwood flooring with floor jack hardwood jack.
  • Nail or glue down flooring strip when starting at straight line.
  • Additional force can be applied if straightening.
  • To release flooring jack install for wood, raise handle fully forward to disengage pawls and manually retract bar.
  • [Quality You Can Trust]: No need to worry about professional hardwood floor jack falling apart under pressure.
  • Flooring jack positioning tool constructed from steel with hardened gear and spring-loaded ratchet mechanism fo....
Check Stock

Fiberfly Jack Plate Aluminum Manual Jack Plate Adjustable 8 Outboard Motor Jack Plate for Boat Steering System

  • 【HIGH QUALITY MATERIAL】- Single Adjusting Jack Plate is made of high strength polished Aircraft Quality Aluminum. Our jack plate will compensate....
  • 【FEATURE】-Adjusts easily by turning one steel bolt；Offers 8 inches of adjustable Vertical movement；8 inches of setback；225 Maximum....
  • 【HEAVY DUTY】-High quality replacement parts that are designed to meet or exceed the original and built with quality parts while manufacturing,....
  • 【PACKAGE INCLUDING】-1 x Single Adjusting Jack Plate. OE FACTORY STYLE & QUALITY..
  • 【APPLICATION】-Jack Plates are the perfect solution for long shaft engines with a short shaft transom.
Check Stock

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
  • Install the base plate on a stable concrete slab under the area you wish to support.
  • Use the mounting holes on top and bottom plates to bolt jack to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
  • VARIETY OF USES: Temporarily secure a weak floor, crawl space, heavy loading area, stairs, or roof trusses ....
Check Stock

KUAFU Jack Plate Adjustable 8'' Outboard Boat Jack Plate Aluminum Manual Power-Lift

  • The outboard jack plate is the perfect solution for long shaft engines with a short shaft transom. The jack plate allows the boat to navigate in shallower waters, which is difficult for a normal engine to do. It also reduces fuel consumption and gives you a good value for money..
  • The outboard jack plate is made of stainless steel fasteners for maximum strength and durability. Durable, anti-wear and anti-rust, not easy to damage, so that you do not need to worry about the problem of broken or rust in daily use..
  • Adjusts easily by turning one steel bolt, offers 4 inches of adjustable Vertical movement,8 inches of setback, Weighs 32 lbs, 225 Maximum Horsepower. Bronze and Brass hardware eliminate binding..
  • The size can be adjusted according to your needs. Item type: Outboard Jack plate.
  • Feature: Color: Sliver, Material: high strength polished Aircraft Quality Aluminum, Condition: New..
  • BUY WITH CONFIDENCE. 100% SATISFACTION GUARANTEE: We are sure you will love our high quality products. However, if you are unsatisfied with either way, you have No-Questions-Asked, 30-DAY Money-Back Guarantee..
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has a 9,700-pound (4,400 kg) capacity.
  • Max height has a 6,800-pound (3,084 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
  • Min height has an 11,200-pound (5,080 kg) capacity.
  • Max height has a 2,500-pound (1,134 kg) capacity.
  • Install base plate on a stable concrete slab under the area you wish to support.
  • Bolt down the mounting holes on base plates to supporting bricks to ensure secure positioning and use the turning bar to extend the height of the house floor jack.
  • Always grease threads before use (grease not included).
Check Stock

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

  • ...are lumber into a temporary support or non-primary support (not intended for permanent installation).
  • [Adjust the Size]: Fits bottom of a 4x4 inch timber post of any height.
  • 4-inch height adjustment thread for shoring tension.
  • 14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height.
  • 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
  • [Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
  • Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
  • Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
  • [Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
  • nails/wood screws recommended, not required or included).
  • [Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
  • Base plate includes (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes spaced 4.5 and 2.25 inches (11.4, 5.7 cm) apart (center to center) for securing to floor (screws not in....
Check Stock

T-Post Puller Fence Post Puller - 36 & 20 Adjustable Height

  • Your metal tool helps remove posts from hard frozen ground by using a handyman jack, chains, tractor buckets of s hook..
  • This t-post puller plate is to be used for the removal of T-posts from the ground with a chain quickly and easily..
  • Your puller plate is made from high grade carbon steel.
  • Your t post puller plate size is 5.9 x 3.1 x 0.6 inches.
Check Stock

Annurssy Brackets & Hinge Assembly for Boat Engine Outboard Electric Trolling Motor

  • Approved for up to 40hp motors (for motors without factory trim and tilt or standard BIA bolting pattern).
  • Works with 0-20hp motors with electric trim and tilt.
  • The Mini Electric On The Fly Jack Plate is easy to install.
  • Our jack plates can be raised and lowered by a up/down push button while on the water within seconds from top to bottom..
  • 3 year warranty on the jack plate housing - 1 year warranty on the electric actuator.
Check Stock

2 Ethernet and 1 Coax Wall Plate,2 Port Cat6 Keystone Female to Female 1 Port F Type Connector Coax Keystone Female to Female Wall Plate …

  • ✅ Easy to install - Installs just like any light switch plate, all you need is a standard screwdriver and plug the cable into the front and....
  • ✅ Easy to clean - The surface of this wall plate is smooth and it's easy to clean.
  • ✅ Convenient usage - This wall port jack is the perfect solution for connecting TV boxes, Router or other Coax/Ethernet Channel-enabled devices to....
  • ✅ Standard size - 7cm*11.5cm (W*L) wall plate with 2 pcs screws, Removable Coax Keystone jack and Cat 6 keystone jack..
  • ✅ Package Contents - 3 Port Wall Plate + 1 x Coax Keystone Jack + 2 x Cat6 Keystone Jack + 2 x Screws.(Not included Low-Voltage Mounting Bracket)..
Check Stock

Greenten Chrome Roller String Trees Retainers,String Guides with Screws Replacement,1 Pair

  • Package includes: 2x jack socket + 8x mounting screws.
  • Jack Socket Cover plate for Square Style..
  • Standard square plate which is used commonly..
  • Mainly for guitar bass jack plate replacemen,replace your worn out parts..
  • Easy to install and looks very professional..
Check Stock