Top Ivvo In 1 Reviews

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
  • 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
Check Stock

TEKTON 1/4 Inch Drive 6-Point Socket and Ratchet Set, 55-Piece (5/32-9/16 in., 4-14 mm) | SKT05301

  • Includes 11-pc. 1/4 in. drive 6-pt. inch sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in..
  • 11-pc. 1/4 in. drive deep 6-pt. inch sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in..
  • 13-pc. 1/4 in. drive 6-pt. metric sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm.
  • 13-pc. 1/4 in. drive deep 6-pt. metric sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm.
  • 1-pc. 1/4 in. drive 90-tooth quick-release ratchet: 6 in..
  • 1-pc. 1/4 in. drive spinner handle: 6 in..
  • 2-pc. 1/4 in. drive extension bars: 3, 6 in..
  • 1-pc. 1/4 in. drive hex bit holder: 1/4 in..
  • Complete set has every size from 5/32 to 9/16 inch and 4 to 14 mm in both deep and standard lengths.
  • 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra large die-stamped size marking is easy to read and can’t wear off.
  • Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
Check Stock

TEKTON 1/4 Inch and 3/8 Inch Drive 6-Point Socket & Ratchet Set, 45-Piece (3/16-3/4 in., 5-19 mm) | SKT95301

  • Includes 9-pc. 1/4 in. drive 6-pt. inch sockets: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 in..
  • 10-pc. 1/4 in. drive 6-pt. metric sockets: 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm.
  • 1-pc. 1/4 in. drive spinner handle: 6 in..
  • 1-pc. 1/4 in. drive hex bit holder: 1/4 in..
  • 1-pc. 1/4 in. hex x 3/8 in. drive power socket adapter.
  • 7-pc. 3/8 in. drive 6-pt. inch sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 in..
  • 10-pc. 3/8 in. drive 6-pt. metric sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.
  • 1-pc. 3/8 in. drive spark plug socket: 5/8 in..
  • 1-pc. 3/8 in. drive 90-tooth quick-release ratchet: 8 in..
  • 1-pc. 3/8 in. drive extension bar: 6 in..
  • 1-pc. reducer: 3/8 in. drive (F) x 1/4 in. drive (M).
  • Complete set has every size from 3/16 to 3/4 inch and 5 to 19 mm.
  • 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra large die-stamped size marking is easy to read and can’t wear off.
  • Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
  • Finely geared 90-tooth ratchet needs only a 4-degree working swing arc.
  • Includes tools not found in most sets like a universal joint, power socket adapter, screwdriver bit adapter, and extensio....
Check Stock

TEKTON 3/4 Inch Drive 6-Point Impact Socket Set, 21-Piece (3/4-2 in.) | 4899

  • Includes 16-pc. 3/4 in. drive 6-pt. sockets: 3/4, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2 in..
  • 1-pc. 3/4 in. drive sliding T-head breaker bar: 18 in..
  • 2-pc. 3/4 in. drive impact extension bars: 4, 8 in..
  • High-performance chrome vanadium steel sockets can be used with impact wrenches.
  • 6-point, high-torque socket design grips flat sides of fastener heads, not corners, preventing round-off.
  • 18 inch, 24-tooth, oval-head ratchet with quick-release drive tang locks onto sockets.
  • 18 inch sliding T head breaker bar loosens frozen fasteners.
  • All parts are protected by a corrosion-resistant black phosphate finish.
  • Meets or exceeds ANSI performance standards.
Check Stock

T Anchor, 1/4 x 3 1/4, PK4

  • Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 1500 Ultimate Pullout (Lb.): 700 Thread Length (In.): 1.85" Size (In.): 1/4 x 3-1/4 Size: 1/4 x 3-1/4" Shank Length (In.): 3-1/4.
  • Max. Work Thickness (In.): 2-1/2 Hole Dia. (In.): 1/4 Grip Range (In.): 1 - 2-1/2 Bolt Dia. (In.) / Threads/In.: 1/4 - 20 Anchor Length (In.): 3-1/4 Anchor Dia./Drill Bit Sz. (In.)/TPI: 1/4 Country of Origin (subject to change): United States.
Check Stock

Dell Stylus Active Pen PN557W for Dell Latitude 5285 2-in-1, Latitude 5289 2-in-1, Latitude 7285 2-in-1, Latitude 7389 2-in-1, Latitude 7390 2-in-1, Latitude 5290 2-in-1, 78FGV, 750-AATY, W55CJ.

  • Device Type: Stylus. Color: Abyss Black..
  • This product is compatible with the following systems: Latitude 5290 2 In 1, Latitude 7390 2 in 1, Latitude 5285 2-in-1, Latitude 5289 2-in-1, Latitude 7285 2-in-1, Latitude 7389 2-in-1. Designed For Dell Latitude 3189, 5179, 5285 2-in-1, 5289 2-In-1, 5290 2-in-1, 7275, 7285 2-in-1, 7390 2-in-1, Dell Venue 10 5050, 10 Pro (5055), 10 Pro (5056), 8 Pro (5855), Dell XPS 12 9250, 13 9365 2-in-1.
  • Dell PN557W Stylus Active Pen for Dell Latitude 12 5285, 12 5289 2 In 1, 13 7389 2-in-1, 7285 2-in-1, 7389 2-in-1.Inspiron (7568) (FHD Only) ‘wake up feature not available’, Latitude 11 (5175), Latitude 11 (5179), Latitude 3189, Latitude 7275, Venue 8 Pro (5855), Venue 10 Pro (5056), XPS 12 (9250),XPS 13 2-in-1 (9365), New XPS 15 2-in-1 9575, Latitude 5285, Latitude 5289, Latitude 5290, Latitude 7285, Latitude 7389, Latitude 7390.
Check Stock

6 Below

  • SG.moda is a USA brand, and this fabulous dress was handmade in Europe (Ukraine)..
  • MEASUREMENTS OF MODELS AS SHOWN ON PICTURES: MODEL 1 (SIZE - S)- 1) Height: 60 5/8 in - 154 cm 2) Chest: 31 1/2 in - 80 cm 3) Waist: 23 5/8 in - 60 cm 4) Hips: 31 1/2 in - 80 cm || MODEL 2 (SIZE - L) - 1) Height: 67 11/16 in - 172 cm 2) Chest: 35 1/16 in - 89 cm 3) Waist: 25 9/16 in - 65 cm 4) Hips: 35 13/16 in - 91 cm || MODEL 3 (SIZE-M) - 1) Height: 66 15/16 in - 170 cm 2) Chest: 31 1/2 in - 80 cm 3) Waist: 23 1/4 in - 59 cm 4) Hips: 34 1/4 in - 87 cm.
Check Stock

Kobalt 573345 33-Piece 1/2-Inch Drive Mechanic s Tool Set with Hard Case Inch/Metric

  • This set includes 12 metric and 15 SAE 1/2-in drive 6-point sockets, 3 extensions, 1 universal joint adapter, 1 ratchet and 1 flex-head breaker bar.
  • Metric socket sizes are 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 and 24 mm.
  • SAE socket sizes are 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16 and 1-1/4-in.
  • Extensions are 3-in, 5-in and 10-in in length.
Check Stock

45W Laptop AC Adapter Replacement for Dell inspiron 15 5000 Charger 13 7000 Inspiron 7352 7359 7368 7370 7375 7378 7386 7390 5368 5551 5552 5555 5558 5559 7568 Power Supply Cord Plug

  • Input: 100-240V 50-60Hz~1.5A Output: 19.5v 2.31A 45W.
  • Connecter size: 4.5mm*3.0mm. If you are not sure whether is correct adapter charger, please feel free to contact us.
  • Dell 45W 19.5V 2.31A laptop power supply for Inspiron 13 5000 7000 series Inspiron 5368 2-in-1 5378 2-in-1 5379 2-in-1 7352 7353 2-in-1 7359 2-in-1 7368 2-in-1 7370 7373 2-in-1 7375 2-in-1 7378 2-in-1 7380 7386 2-in-1 7390 2-in-1(Not Fit Dell Inspiron 15 7557 7559) AC adapter.
  • Dell 45W charger cord for laptop Inspiron 14 3000 5000 7000 series Inspiron 3451 3452 3458 3459 3462 3465 3467 3468 3472 3473 5451 5452 5455 5458 5459 5468 5481 2-in-1 5482 2-in-1 5485 5485 2-in-1 5488 7437 7460 7472.
Check Stock

TEKTON 1/2 Inch Drive 6-Point Socket and Ratchet Set, 58-Piece (3/8-1 in., 10-24 mm) | SKT25301

  • Complete set has every size from 3/8 to 1 inch and 10 to 24 mm in both deep and standard lengths.
  • 6-point sockets apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra large die-stamped size marking is easy to read and can’t wear off.
  • Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
  • Finely geared 90-tooth ratchet needs only a 4-degree working swing arc.
  • Includes tools not found in most sets like a universal joint and extensions.
  • Strong, resilient storage case with built-in parts tray keeps everything organized.
  • Includes (11) 1/2 in. drive 6-pt. inch sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in., (11) 1/2 in. drive deep 6-pt. inch sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in., (15) 1/2 in. drive 6-pt. metric sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm, (15) 1/2 in. drive deep 6-pt. metric sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm, (1) 1/2 in. drive 90-tooth quick-release ratchet: 10.5 in., (1) 1/2 in. drive breaker bar: 18 in., (2) 1/2 in. drive extension bars: 3, 10 in., (1) universal joint: 1/2 in. drive, and (1) storage case.
Check Stock

Diversified Fastening Systems GCPT14212 T Anchor 1/4 x 2 1/2 PK4

  • Price For: Each Includes: Body, Nut, Washer Meets/Exceeds: G.S.A. FF-B-588C, A.N.S.I. A58.1, A.S.T.M. B-633 Anchor Type: Toggle, Gravity Activated Type: T-Anchor Box Count: 4 per pack Head Style: Nut Ultimate Shear (Lb.): 1500 Ultimate Pullout (Lb.): 700 Thread Length (In.): 1.275 Size (In.): 1/4 x 2-1/2 Size: 1/4 x 2-1/2" Shank Length (In.): 2-1/2.
  • Max. Work Thickness (In.): 1-3/4 Hole Dia. (In.): 1/4 Grip Range (In.): 1 - 1-3/4 Bolt Dia. (In.) / Threads/In.: 1/4 - 20 Anchor Length (In.): 2-1/2 Anchor Dia./Drill Bit Sz. (In.)/TPI: 1/4 Country of Origin (subject to change): United States.
Check Stock

Heat-Fab 2806B 8 x 38 - 70 Adjustable Pipe Length Black

  • 7 popular interchangeable sized cutting dies, sizes include: 3/8", 1/2", 3/4",1", 1-1/4", 1-1/2", an.
  • Ratchet head with adapter and Three piece handle.
  • Storage case is for shipping only ( Storage case does get crack or dent).
  • Includes 7 pipe dies: 3/8in., 1/2in., 3/4in., 1in., 1 1/4in., 1 1/2in. and 2in..
  • 16in. to 26in handle provides solid leverage and features an easy reversing knob.
Check Stock

Broonel Black Fine Point Digital Active Stylus Pen - Compatible with Dell Inspiron 15 3511 15.6" Laptop

  • Designed For XPS15 9575 2 in 1, XPS 15 9570 XPS 12, 13 9365, 9250 Inspiron 13 5378, 13 5379, 13 7378, 15 5578, 15 5579, 15 7579, 7373 2-in-1, 7573 2-in-1.
  • Latitude 12 5289, 13 7389, 3189, 5175 2-in-1, 5285 2-in-1, 5290 2-in-1, 7285 2-in-1, 7389 2-in-1, 7390 2-in-1.
  • Features White LED indicator, Wacom Active ES technology, Wacom Active ES technology (AES) 2.0, Microsoft Pen Protocol (MPP) 1.51, Windows Ink Workspace.
  • The magnetic pen securely attaches to the side of your 2-in-1 on supported Dell 2-in-1 notebooks.
Check Stock